Repairs / renovation of Udyogamandal Club in FACT Udyogamandal Township

Renovation of UDL. Club in FACT T/S - Udyogamandal Division

Dismantling and removing carefully the existing brick/rubble/laterite masonry in cement mortar at all levels and conveying and depositing the debris and stacking the serviceable material at places pointed out within a distance of 150m.

Dismantling & removing existing asbestos, aluminium or G.I. Roofing sheets with ridge from roofs at different levels and stacking the same, itemwise as directed at Township Civil Maintenance Office yard.

Dismantling, removing and lowering carefully planked sheeting, boarded floor, ceiling etc. and stacking materials in Carpentry Shop or Township office.

Removing the plants by uprooting them from various building structures in Township without causing any damage to the existing structures.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Demolishing and removing old cement plaster and disposal of the debris at places pointed out within a distance of 150M.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Earth work excavation in all classes of soil except hard rock requiring blasting for foundation trenches, drains, column footings, equipment foundations etc. not exceeding 1.5m in width or 10sq.m on plan,including filling in basement and sides of foundation with the spoil earth in layers,breaking clods, watering, ramming and consolidating and conveying and depositing the excess spoil or filling in low lying area and levelling within an initial lead of 50M and lift upto 1.5M, etc.complete .

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level.

Supplying and providing Terracotta colour coated Tile profile Aluminium roofing sheets having 0.50mm or nearest thickness of Hindalco Everlast make or approved colour and profile at all levels with hooks/fasteners/bolts/nuts(of hot dip galavanized steel/aluminum ) washers, overlaps of sheets with adequate sealing arrangements including cutting sheets to required shape /length and fixing with self drilling and self tapping screws of required diameter and length etc. as as per manufacturers specifications.

Supplying and fixing AC corrugated or trafford sheets for roofing works with minimum end overlap of 150mm with necessary 8mm dia. G.I. Bolts, nuts & bitumen washers etc. complete at all levels..

Roofing / side cladding with AC or aluminium or GI sheet provided by the company with necessary 8mm dia GI bolts, nuts, washers, compound etc (Labour only).

Providing and fixing valley work with A1. Sheets of 22 guage(0.71mm thick) or nearest available thickness, 900mm wide, end overlap of 150mm at joints on AC sheets/tiled roof including necessary nailing / screwing etc. complete at all levels but excluding cost of planking / frame works.

Providing and fixing false ceiling with PVC lamination sheet 9 mm thick (3050 x300 x 9mm) of approved quality and shade on the existing / new wooden frame work including fixing to the frame work with C.P brass screws etc. complete as directed by the Engineer-in-Charge including cost of PVC sheets, beeding, screws etc. and labour charges but excluding cost of frame work.

Providing,cutting to required size and placing in position 4mm thick AC sheets to the Aluminium frame work already provided for false ceiling.

RCC or CC work 1:2:4 mix, using 20mm nominal size broken stone excluding cost of form work and reinforcement .

Plastering with cement mortar 1:4, for an average thickness of 12mm , one coat floated hard and trowelled smooth at all levels.

Providing form work to RCC / CC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for foundation footings, machine equipment foundations and pedastals over foundation footings, sides of trench walls, plinth beams and rafts, pile caps and mass concrete works etc.at all levels inside factory area.

Finishing cement plastered surfaces integrally at all heights , with a neat flushing coat of cement.

Supplying and fixing pure polyester powder coated coloured aluminium frame work of extruded sections and approved brand/manufacturer including mitring the joints, fixing the frame work with necessary screws, drilling holes in floors, walls and ceiling, providing plugs for fixing screws, finishing the sides of packing between frame work and wall/ceiling with plaster of paris, cost of timber packing if necessary, rubber lining for air tightness, providing corner cleats, etc. complete as per standard practice for glazed doors, windows, side hung as well as sliding windows, ventilators, partitions etc. including all hinges, pivots, tower bolts, peg stays, fixtures, and pure polyester powder coated aluminium approved brand beadings, handles & approved locking system at all levels.(Payment will be given for the weight of aluminium sections only)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing 3mm thick plain glass for glazing of shutters, partition etc. with teak wood fillet, putty etc. on new work / replacing of broken glass panes in existing shutters etc including dismantling the broken glasses,if any.

Supplying 6mm commercial plywood

Panelling the frame work of wooden partition with 4mm thick one side teak veneered plywood of approved quality and necessary iron wire nails including all charges for keeping uniform gap between panels if required etc. complete ( both sides measured separately)

Supplying MS wire nails

Supplying stain less steel butt butt hinges 100 mm

Supplying stain less steel butt butt hinges 75 mm

Supplying Iron hooks and eyes 65mm

Supplying Iron hooks and eyes 100mm

Supplying anjily wood reepers of 40mm X 16mm or nearest size for false ceiling work.

Supplying best approved quality Aluminium tower bolts- 150 mm long x 10mm dia.

Supplying best approved quality iron screws of 20mm long or nearest available size (4,5, 6 & 7guage)

Supplying best approved quality iron screws of 25mm long or nearest available size (5, 6, 7& 8guage)

Fixing fabricated / repaired, doors / windows/ ventilator shutters to existing frames with all necessary hard ware fittings at all levels.(labour only)

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD .

Supplying ,threading /laying and jointing PVC pipes conforming to IS 4985-1981 class IV(6kg/cm2) for internal water lines with all required pvc specials such as tees,bends, elbows, unions,reducers, etc.with clamps including cutting and making good the walls etc. complete - 50mm or nearest OD

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete -63mm or nearest OD .

Providing and fixing Chlorinated Polyvinyl Chloride SDR 11 pipes of Astral or equivalent, having thermal stability for hot & cold water supply, including all CPVC fittings, fixing the pipe with clamps at 1.00 m spacing, joining pipes & fittings with CPVC solvent cement, the cost of concealed work for cutting chases and making good the same, making good the walls, testing of joints etc complete as per direction of Engineer in Charge- 20mm dia

Providing and laying Double charge Vitrified tiles polished finish in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints of Size of Tile 600x600 mm

Providing and laying antiskid Ceramic Floor Tiles in different sizes (thickness to be specifiedby the manufacturer), of 1st quality conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,including grouting of joints.

Providing and laying anti skid ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer) of approved make in all colours, shades and size, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment, cost and conveyance of all materials, labour charges, lead, lift etc. complete at all levels in approved size & pattern from approved manufacturer as directed by the Engineer in-charge for toilet wall and kitchen.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge - 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern (IS 15658)

Applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour-Two coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat

Applying priming coat of exterior primer for finishing walls with Acrylic Smooth exterior paint at all heights including cost of all materials,labour charges, hire charges for scaffolding etc. complete after cleaning thoroughly as per instruction of Engineer-in-charge.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coat- of exterior grade

Applying one coat best approved quality polyurethane clear wood finish one coat to doors, windows etc. after rubbing with sand paper and cleaning well the surfaces at all heights.

Floor Painting with water based floor paint of approved brand and manufacture of required colour to give an even shade- 2 coat

Supplying & fixing floor mounted Single piece WC (Jaquar model SLS-WHT-6851P) with PP soft close seat cover, hinges, fixing accessories and accessories set , cistern fittings P Trap-180mm

Supplying and fixing white glazed Orissa pattern W.C pan (HINDUSTAN or equivalent) of size 530x410mm with P/S trap including embedding the closet and trap in cement concrete, giving connection to the sewer line with all necessary specials, cutting and making good the walls and floors wherever required etc. complete as per direction at site.

Supplying and fixing PVC floor trap with strainer (PVC solo grating) of approved brand 110mm size with required provision of outlets and inlets, locking tile, strainer, etc. as per manufactures specifications, cutting and making good the walls and floors, etc. complete.

Supplying and fixing Half pedestal Wash Basin (Jaquar model CNS-WHT-305 with fixing accessories set ) including CP waste coupling (Jaquar Model ALD-709) with suitable inlet connection(805B) etc. complete.

Supplying and fixing Pillar cock (Jaquar model OPP 15001 PM or equivalent Jaquar make.)

Supplying Health Faucet Hindware / Cera

Supplying and fixing Hand shower (Health Faucet) with 8mm dia, 1.2m long flexible tube and wall hook (Jaquar model ALD 573)

Supplying and fixing 15mm or nearest bore long body bib cock with wall flange (Jaquar model CON 107 KN or equivalent).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms- 15 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.

Supplying and fixing angular Stop cock with wall flange(Jaquar model FLR 5053N)

Supplying and fixing Stainless Steel angular Stop cock with wall flange "CERA/ HINDWARE or equivalent type

Supplying and fixing Stainless Steel Concealed Stop cock ¾ inch with adjustable wall flange "CERA/ HINDWARE or equivalent type.

Supplying and fixing Over Head Shower with shower arm and wall falnge with chrome finish (Hindware or similar)

Supplying and fixing Over Head Shower (Jaquar-OHS-35497)

Supplying and fixing Shower arm for wall mounted Showers with SS Flange (Jaquar model SHA-479L300S)

Supplying and fixing wall mounted Single piece Urinal (Jaquar model URS-WHT-13255 or equivalent Jaquar make) without sensor with Fixing Accessories Set , size : 480x300x740 mm.

SUPPLYING AND FIXING SENSOTRONIC SENSOR FLUSHING VALVE FOR URINAL WITH COMPLETE KIT SUITABLE FOR URINAL URS-WHT-13255 (Jaquar sensor for urinal SNR-CHR-51097 or equivalent Jaquar make).

Supplying and fixing urinal division plates (porcelain) with approved quality, color and size 75 x16.5 x36.5cm or nearest ( Hindware or equivalent ).

Providing and fixing PTMT Soap dish holder having length of 138mm , breadth 102mm, height 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour- 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Supplying and fixing at all levels FRP doors with frames & 4mm etching glass made of glass fibre conforming to IS: 11551 (As per attached technical specifications).

Rendering male coolie inclusive of all charges of labour and hire for tools required for cleaning drains, collecting and dumping unwanted materials in low lying areas as directed and transporting bricks, cement etc. from stores, lifting to various heights, mixing mortars and castables, providing scaffolding or any other works as per the instructions of the Engineer-in-charge in all shifts including Sundays and Holidays .

Rendering skilled labour inclusive of all charges of labour and hire for tools required for executing skilled work at all levels with materials supplied from Company in connection with civil works as per the direction from the Engineer-in-charge in all shifts including Sundays and Holidays.

Transporting excess spoil earth, gravel, sand, broken stones, split stones, laterite stones, blasted rubble / dismantled materials upto 45 DM3 size etc. by lorry to places pointed out upto a maximum distance of 5KM including loading with a lead of 50m and lift upto 1.5m at each loading point etc. complete.

Supplying & fixing false ceiling using 8 mm thk square edge laminated Gypsum celing tile of 595 x 595 mm, made of Gypsum plaster board as per IS 2095 part 1 & laminated with white 0.07 mm thk fire retardant PVC film on face side & 12 micron metalised polyester film inserted on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm, both side inclusive ) consisting of main "T" runner (minm 45 mm thk), spaced at 1200 mm c/c & cross "T" (minm 45mm thk) spaced betwen the main "T" at 600mm c/c to form a grid of 1200 x 600 mm & secondary cross "T" of length 600 mm to be interlocked at middle of 1200 x 600 mm panel to form grids of 600 x 600 mm and necessary cleats, dash fasteners, adjustable GI rods with butterfly level clips etc. Bottom exposed width of all "T" sections shall be pre-painted with polyester paint, complete at all heights as per instructions.

Applying Priming Coat- With ready mixed red oxide zinc chromate primer of approved brand and manufacture after scraping and cleaning the surface at all heights of steel grills,bars,structures etc.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 6 mm thickness

Supplying & fixing floor mounted Single piece WC (Hindware Flora 20107 starwhite or equivalent) with soft close seat cover, hinges, fixing accessories and accessories set , cistern fittings.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

S Shaji

IMPULSE HEAVY ENGINEERING

MUHAMMED HANEEFA PY

FOURF INTERNATIONAL

SHREE DESIGNERS