Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC | L1 | Accepted-AOC accept | |
| 2 | L2₹22.3 L+₹57,876.55 (2.66%)Rejected-AOC VILLAGE VILLAGE TEHSIL BAIJNATH DISTRICT KANGRA | MANDI | HIMACHAL PRADESH | 175013 | L2 | Rejected-AOC accept | |
| 3 | L3₹22.3 L+₹57,936.10 (2.66%)Rejected-AOC VILLAGE DOHAL PO PATTI TEHSIL PALAMPUR DISTRICT KANGRA | KANGRA | HIMACHAL PRADESH | 175013 | L3 | Rejected-AOC accept |
Tender Value
₹19.1 L
EMD Value
₹38,213
Closing Date
25 May 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer JSV Division Thural
O/O The Executive Engineer JSV Division Thural
Additional and Alteration of Jal Shakti Inspection Hutt at Akshaina in Tehsil Palampur, Distt. Kangra
2022_HPIPH_60744_1
THL-KNG05-729 (2873-42 dated 18.05.2022))
Open Tender
Civil Works - Buildings
Item Wise
120 days
Additional and Alteration of Jal Shakti Inspection
Please refer Tender documents.
10 documents required · 10 mandatory
₹800
₹38,213
Yes
23 Jun 2022
18 May 2022
26 May 2022
18 May 2022
25 May 2022
18 May 2022
180 days
Amount
Excavation in foundations and trenches(for pipes and pits in all depths etc.) in all lifts and in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiseling/wedging out of rock (where blasting is prohibited)and saturated soils, stacking the excavated earth within all leads and lifts, clear from the edge of excavation and then returning the stacked soil in 15 cms. layers when required into plinths, sides of foundation and trenches etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by Engineer-in-charge within all leads and lifts.
Providing & laying cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring & shuttering in Foundation & plinth in all leads & lifts as per the direction of engineer in charge .
Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts.
Providing & laying cement concrete1:1½:3 (1cement :1½ sand : 3 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-
Foundation,footing,bases of columns and the like & mass concrete.
In suspended floors , roofs , landing & shalves & their supports balconies , beam girders , bressumers & cantilever up to floor two level as per the direction of Engineer in charge .
In columns , pillars post and Strits upto floor two level as per the direction of Engineer in charge .
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering struttting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4mts. and removal of the same for in-situ reinforced concrete and plain concrete work in:-
Foundation,footing,bases of columns and the like & mass concrete.
Beam, cantilevers, girder and lintels:- Sides and soffits of beam haunching cantilever, girder, bressumers and lintels not exceeding 1 metres in depth.
In columns , pillars post and struts upto floor two level.
Filling in plinth with sand under floors including watering, ramming, consoldating and dressing complete as per the direction of Engineer in charge .
Filling in plinth with boulder/crushed stones under floors including watering, ramming, consoldating and dressing complete as per the direction of Engineer in charge .
1st class brick work using common burnt clay building bricks in superstructure above plinth level upto floor two level in cement mortor 1:6 ( 1 cement :6 approved sand)in all leads and lifts as per the direction & Satisfaction of Engineer in charge .
Providing and laying slate stone in flooring 25mm(average)thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick in all leads and lifts as per the direction & Satisfaction of Engineer in charge .
Providing and laying slate stone in vertical wall cladding 25mm (average) thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick in all leads and lifts as per the direction & Satisfaction of Engineer in charge .
15 mm thick cement plaster in single coat on rough/ fair side of brick/stone masonry for interior plastering up to floor two level i/c arisses internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even & smooth in C:M 1:6(1cement:6sand) in all leads and lifts as per the direction & Satisfaction of Engineer in charge .
P/L antiskid waterproof stain and impact resistant heavy duty vitried tile in grey/coloured of approved shade.in all leads and lifts as per the direction & Satisfaction of Engineer in charge
Providing and fixing paneled glazed of paneled and glazed shutter for door ,windows and clearstory windows including black enameled iron butt hinges with necessary screws 40mm thick with 1st class deodar wood complete in all respect with in all leads and lifts as per the direction of engineer in charge.
Providing and fixing wire gauge shutters for door ,windows and clearstory windows including black enameled iron butt hinges with necessary screws 40mm thick with 1st class deodar wood complete in all respect with in all leads and lifts as per the direction of engineer in charge.
Providing and Fixing toughned Glass with Moulding / battens and nail complete in all respect as per the direction of engineer in charge . ( 12 mm thick )
12 mm thick
6 mm thick
Providing and Fixing non transparent film to the Glass frame of Bathroom windows in all respect as per the direction of engineer in charge .
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc complete as per the architectural charge . (Cost of aluminium snap beading shall be paid in basic item):drawings and the directions of engineer -in- charge.
With toughned glass panes of 12mm thickness.
Providing and Fixing false ceiling at all height including Providing and Fixingof frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed 185 Code No. Unit Rate Description 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) sqm 859.45 12.45.2 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm 978.90 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board sqm 1028.05 12.45.4 Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerincharge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 sqm 1217.70 with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting.
8 mm thick tapered edge gypsum moisture resistant board.
Providing and Fixing Wooden Ceiling with G.I. Channel powder coated of approved size , shape and brand with adhessive of approved quaility in all leads and lifts as per the direction & Satisfaction of Engineer in charge .
GANTANTAR THAKUR
AMIT CHOUDHARY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .