Repairs to 10 cusec, 12m head Horizontal shaft, end suction pump to be carried out at Lift Irrigation Scheme Hibdangerpora of MISD Sopore.

Amount

Complete dismantling of single stage horizontal pump of capacity 10 cusec, 12m head by way of Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump. Disassembling, dismantling and segregation of various pump parts such as shaft and sleeves, impeller, gland, fasteners, etc.

Mechanical transportation, loading, unloading and handling of pump using appropriate means of transport like Tata Mobile upto a lead of 24 Km per trip.

Fabrication, turning and finishing of specified Stainless Steel (AISI-410 or IS 1570) shaft with end preparation (threaded, etc.), keyway as per old sample having finished weight of Approx. 19 Kgs.

Providing and fitting of ball bearings of size 6412 (2 No.), thrust bearing of size 51314 to both driving end and non-driving end of pump after removing and extraction old damaged bearings from bearing hubs. The job includes providing and fitting of oil seals of required size. Providing and filling of M. Oil 02 Litres and greasing of the bearings complete. Make: ARB/ZKL/NBC.

Fabrication, turning, finishing and fitting of Stainless steel (AISI-410 or IS 1570) shaft sleeve as per old sample, etc. having finished weight of 1.1 Kg.

Manufacturing, providing and fitting of stainless steel (IS 1030) chuck nut/ impeller adjusting nut with proper locking arrangement as per sample available (Approx. 0.5 kg).

Manufacturing, providing and fitting of G.M cooling ring as per old sample (0.25 Kg).

Providing and fitting of palmative packing.

Complete assembling of single stage horizontal pump of capacity 10 cusec, 12m head after cleaning of all parts thoroughly with petrol, coupling and alignment with motor, connecting of motor leads and testing on full load.

M/S EURO LIGHT ENTERPRISES

MEER ENGINEERS INDUSTRIAL ESTATE SOPORE