SPL REPAIR TO RATION SHED (T-12 AT DET 10 COMPO AND SPL REPAIR TO JCOs MESS AT EME BN GULMARG UNDER GE 969 EWS

Amount

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above ground level) unreinforced complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L machine cut Kota stone slab flooring 20-25mm thickas per sample kept in GE's office,laid over and incl 15mm thick cement screed base in CM (1:6) ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and as directed.

M & L joint free Non-skid ceramic coloured tiles 7 to 8mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM (1:6) complete all as specified and as directed.

M & L Non-skid ceramic coloured tiles(joint free tile) area of each tile (sqr/rectangle) exc 0.06 sqm but not exc 0.11 sqm tile thicknessn 7 to 9mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM (1:4) complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each, complete all as specified and as directed.

Taking down shutters of any description n. exc 1.00 Sqm each, complete all as specified and as directed.

S&F second class hard wood 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F extruded aluminium alloy handles, 100mm fabricated type anodized, complete all as specified and as directed.

S&F Butt hinges, 100mm medium weight, cold rolled mild steel and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, 250mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

Preparation of new or previously untreated wooden surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coat of synthetic enamel paint over a coat of prink primer, complete all as per specified and as directed.

Preparation of old painted wooden surfaces of any descriptoin, not otherwise described, over 10cm witdth or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Hacking out broken glass (any thickness, size, quality or description) from wooden frame/steel frames fixed with putty or wooden beads, complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane fixed in complete all as specified and as directed.

S&F in repairs mild steel, chromium plated curtain rod 20mm dia with brackets, complete all as specified and as directed.

Taking down Gl water tubing and connections and taken in to schedule of credit for 15mm bore all as directed.

Taking down Gl water tubing and connections and taken in to schedule of credit for 20mm bore all as directed.

S&F tubing medium grade galvanized 15mm bore GI with all fittings and fixed complete to walls and ceiling or laid in floors.

S&F tubing medium grade galvanized 20mm bore GI with all fittings and fixed complete to walls and ceiling or laid in floors.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc, complete including making good to floor, complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet (pedestal pattern) white,(excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc complete all as specified and as directed.

S&F vitreous China wash basin, Pedestal Type white, flat back, size size 550 x 400 mm including 32mm waste fittings,brass, chromium plated for glazed ware basins, etc with long screwed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed, complete all as specified and as directed.

S & F in repair 10 litre capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon, complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed wodn, screwed for iron pipe, 15mm bore or for brass ferrule and fixed complete all as specified and as directed.

S&F Central hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair complete all as specified and as directed.

S&F Towel rail 600 mm long of SS fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.

S&F in repairs PVC gully trap with cover size 125mm including PCC bed complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F PVC (sWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches or floors all as specified

S&F PVC (SWR) bends 75mm bore, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm bore, complete all as specified and as directed.

S&F PVC SWR vent cowl 110 mm bore, complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, for Fe 410 -w (Gde- E 250) quality- A

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof coverings in any position, complete all as specified and as directed.

S&F 0.63mm thick grade with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof, complete all as specified and as directed.

All as per above item No. 43 but except sheeting

S&F 0.80mm thick grade Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting. in ridges, hips, valley gutters, drip and straight flashings, complete all as specified and as directed.

Preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L painting old steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint incl preparation of surfaces, complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over section in fixed any position complete all as specified and as directed.

Dismanting fillets, rails, posts, rafters,purlins, etc under 40 Sqcm in section, complete all as specified and as directed.

M&L second class soft wood as in scantling clean sawn timber, complete all as specified and as directed.

M&L 2nd class soft wood Plain fillets exc 13 Sq.cm, n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.

M&L 2nd class soft wood Plain fillets n.exc3 Sq,cm, rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.

S&F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) With decorative face veneers on one faces: fixed with nails to timber frame Work on wall.

S&F 6mm thick Veneered decorative plvwood. grade 1 (with BWR resin) with decorative face veneers on one faces: fixed with nails to timber frame work on ceiling.

M&L for 75mm thick cement concrete type C-2, (1:3:6) (40mm graded agrregate) as in sub base floors and including preparaion of well/rammed/compacted earth.

M&L for 40mm thick cement concrete type B-0, (1:2:4) (12.5mm graded agrregate) as in floors surface even and smooth w/o using extra cement Complete all as specified and as directed

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

M&L for second classs softwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rouded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L Refixing of Shutter n exc 1 Sqm in same opening after necessary repair/resize.

M&L Refixing of Shutter exc 1 Sqm n exc 2 sqm in same opening after necessary repair/resize.

S&F second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to recelve glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers, In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

S&F 2nd Class Hard wood 35 mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including on surface of wood or wood based of any description including complete removal of exisiting paint.

S&F 2mm Thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof, complete all as specified and as directed.

All as per item No. 65 above but except sheeting

Preparation of old painted zinc or galvanised surface of any description and in position and applying one coat of synthetic enamel paint all as specified. Note :- (a) The surface of corrugated steel sheeting shall be measured flat (not girth) without any extra allowance for laps and the area obtain shall be increased by 14%). (b) The surface of plain steel sheeting as in ridge, hips, velley gutters, flashings etc, shall be measured flat along with girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting

Dismantling boarding. any description, fixed in any position with nails, complete all as specified and as directed.

M&L 2nd class soft wood Weather boarding.clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps, complete all as specified and as directed.

S&F second class softwood 20mm thick facia boarding fixed with nails in any situation planed one side with butt joints complete all as specified and as directed.

S&F second class softwood boarding in floor and skirting 40mm thick planed one side with butt joint and fixed with nails for repair to existing floor in patches etc.

All as per item No. 71 above but except boarding fixed with nails, complete all as specified and as directed.

M&L Second class softwood boarding supplied and fixed with nails in any situation (except flooring and skirting) clean sawn Planed one side and edges tongued and grooved (internal) or rebated 20mm thick, complete all as specified and as directed.

M&L for 12mm thick plywood, grade BWR type BB, fixed with nails to timber frame work in ceiling etc.

Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for walling of random rubble uncoursed well bonded bedded and solidly hearted slate stone locally available stone built in CM (1:6) complete all as specified.

M&L Brick work with subclass 'B bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:4), complete all as specified and as directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement. mixed with water proofing compound Note : WPC shall be measured and paid separately.

Supply only Liquid water proofing compound, complete all as specified and as directed.

M&L for cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in Surface channel and drains, complete all as specified and as directed.

M&L for PCC 1:3:6. Type C-2 (40mm graded aggregate) as in foundations, filling and mass concrete etc.

M&L for providing cement concrete 1:2:4, Type B-1 (20mm graded aggregate) as in Coping, complete all as specified and as directed.

S&F Framed work such as MS grill frame guard bar etc confirming to Kg Fe-290 Gde E-165 incl all necessary welding etc.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materiais to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors. etc.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers junction boxes/MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :

(a) One light/ceiling fan point Point controlled by one switch.

(b) One switch socket combination 5 Amps on independent board.

(c) one switch socket 5 Amps on same Board.

M&L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor.

S&F in repair Switch piano flush type single pole, one way 5/6 Amp, complete all as specified and as directed.

S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall ceiling and including Pvc block, complete all as specified and as directed.

S&F in repair Lamp holder, insulated body, threaded dome pattern, suitable for bracket fittings, complete all as specified and as directed.

S&F in repair LED bulb thread/pin type of capacity 10 Watt, complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

Supply and fixing LED fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and as directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S&F in repair MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity 40 Amp SPN in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 20 AMP, in the MCB DB and Commissioning, complete all as specified and as directed.

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of síngle poles and current carrying capacity 20 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheatning of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or circular 16 Sqmm, complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60x60cm.x 6mm thick. buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F testing and Commissioning of Voltage stabilizer for automatic operation, three phase naturally oil cooled, indoor type & designed for input variation between 300V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% amd speed of correction 8 Volts per second and suitable for 100% Balanced/unbalanced Load 100% balanced/unbalanced Supply as per latest IS standards suitable for all power factor Imported Low losses CRGO Laminations-M4 Grade imported high grade graphite carbon bushes with first filling of oil of capacity 50 KVA with 6 x thimbles of suitable size with 02 Nos of Lifting Lugs. 02 Nos of Earthing terminals 01 Nos oil filling Valve.

Earthing complete with galvanised steel earth plate electrode 60x60cm.x 6mm thick. buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip of 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core.

Excavating in trenches, n exc 1.5m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 Sqm on plan and n. exc 1.5m in depth and getting out, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point, complete all as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note : The punned down thickness shall only be measured).

Supply and laying sub class 'B' bricks laid across the cable for protection complete all as specified and as directed.

Note:- Schedule of credit Rs. 1,11,354.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S KULWANT SINGH RAINA AND CO

M/S G M DAR AND SONS

QAZI SONS