Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC AMRUTHA BHAVAN ANAPETTAKONGAL P O EDAMON KOLLAM | EDAMON | KOLLAM | KERALA | ₹19.2 L | L1 | Accepted-AOC Lowest rate quoted. 16.30 percentage below estimate rate |
| 2 | L2₹19.7 LRejected-AOC | ₹19.7 L | L2 | Rejected-AOC Second lowest quoted. 14.10 percentage below estimate rate |
| 3 | L3₹19.8 LRejected-AOC MANALUVILA THUNDIL KAITHACODE KOLLAM | KOLLAM | KOLLAM | KERALA | ₹19.8 L | L3 | Rejected-AOC Third lowest quoted. 13.70 percentage below estimate rate |
| 4 | L4₹20.4 LRejected-AOC 4 63 RAJESH BHAVAN CHANNACKAMON KARAVOOR PO KOLLAM | KOLLAM | KOLLAM | KERALA | ₹20.4 L | L4 | Rejected-AOC Highest rate quoted. 10.96 percentage below estimate rate |
Tender Value
₹19.4 L
EMD Value
₹48,600
Closing Date
5 Mar 2026, 4:00 pmClosed
Assistant Executive Engineer
Transmission Sub Division Punalur
Providing yard fencing for the newly constructed bay and replacing damaged fencing during cable trench construction in connection with Traction Works at 110kV substation, Punalur
2026_KSEB_839525_1
AEE/TSD-PLR/DB-20/25-26/ 03 /23.02.2026
Open Tender
Civil Works - Others
60 days
110kV Substation Punalur
Please refer tender documents
9 documents required · 9 mandatory
₹5,900
₹48,600
26 May 2026
24 Feb 2026
11 Mar 2026
24 Feb 2026
5 Mar 2026
24 Feb 2026
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer – in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer – in-Charge. Nominal concrete 1:4:8 leaner mix (including equivalent design mix)
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar
Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges: In cement mortar
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed: All Kinds of soil
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
Centering and shuttering including strutting, etc. and removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge. Made of G.I. wire of dia 4 mm
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Picking and stacking the spreaded 6/40mm metal for reuse including filtering/washing etc complete as per the direction of dept officer at site
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
Supplying and stacking 6 mm black granite brokenstones in specified area in standard heaps for measurements as per the direction of deptl. officers in charge
Supplying and stacking 40 mm black granite brokenstones in specified area in standard heaps for measurements as per the direction of deptl. officers in charge
Conveying, laying and spreading 6mm broken stone on the levelled surface of the yard at a uniform thickness of 10cm etc. Complete as per the direction of dept. Officers in charge
Conveying, laying and spreading 40mm broken stone for a thickness of 15cm at a uniform thickness in the yard, neatly packed levelled etc. Complete as per the direction of dept. Officers in charge
Cutting 32mm MS rod in required length etc complete as per the direction of the departmental officers.
Bending 32mm MS rod for crossing cable trench/foundations/risers etc.
Welding of overlapping joints for mat,riser lap joints with 32/25mm MS rod placed in trenches, having 150mm in length 6mm in thick on both sides of the rod and both ends of overlapped MS rods with 6mm welding thickness after cleaning the surfaces neatly. Charges includes cost of low hydrogen DC electrode (No. E7018), hire charges of DC arc welding set and tools and plants required, current charges including labour charges for holding MS rod in position and applying two coats of anti corrosive paints at the welded joints etc. complete as per the directions of department officers.
Welding the nodal points (cross joints ) in the trenches at two sides to a thickness of 6mm after cleaning the surface neatly. Charges includes cost of low hydrogen DC electrodes (No. E7018), hire charges of DC welding set and tools and plants required, current charges, labour charges for holding MS rod in position and applying two coats of anti corrosive paints at the welded joints etc. complete as per the directions of departmental officers.
Laying of departmentally supplied GI strip/Copper strip of suitable size including cleaning and neatly bending of strips ,cutting, removing of metal/earth in the yard and burying earth strip to the required depth re-doing the yard metalling as per the direction of the departmental officers.
Welding one end of the bended GI strip of size 50x6mm with the riser of the already laid earth mat, welding 150mm in length, 6mm thick on both sides & end of the strip & other end of the strip with yard structure at 2 points 50mm apart each welding points having 50mm length and 6mm thick on both sides & end of the strip including the charges for connecting the strip with structure using bolted joints as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete.
Welding overlapping joints of 50x6mm GI strip with 50mm long, 6mm thick welding on all three sides after doing 2 Nos. bolted joints at the centre as specified after cleaning the surface. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes( No.E7018) cost of anti corrosive paint etc. complete.
Welding one end of the bended GI strip of size 50x6mm with the riser of the already laid earth mat, welding 150mm in length, 6mm thick on both sides & end of the strip and connecting other end with nuts & bolts if required as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete.
As per Circular no.FA/Tax Cell/GST- Tendering/2020-21 Dated24.02.2021, the following conditions shall be noted. 1. The contractor should quote only the amount excluding GST and TCS. 2.The contractor should not quote the GSTrate, GST amount and TCS. 3. Only GST registered persons are eligible to participate in the tender and it is mandatory to specify the registration status and quote the registration number along with the copy of GST registration and the same shall be uploaded. 4. If the GST registration status is Composite, such contractor will be treated as unregistered contractor.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1414866.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.35 MB
BOQ_1414866.xls
BOQ • 0.31 MB
TenderDocT.pdf
Tender Documents • 1.16 MB
Download all tender documents and submit your bid