SPL REP AND ADDN ALTN TO BLDG NO P-23/2 COOK HOUSE OF 2119 FD HOSP AND PROVN OF WALLING TO VERMICOMPOST CEMENT TANKS AND COVER WITH IRON NETTING IN BLDG NO P-12/05 AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Excavation in over areas n exc 1.5m deep and getting out in soft/disintegrated rock .

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / disintegrated rock complete all as specified and directed.

M & L for Plain Cement Concrete type D2, 1 : 4 : 8 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc fair finished surfaces of concrete flat all as specified.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L for brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6)complete all as specified.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished the plaster surfaces fair and even, without using extra lime or cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down of shutter of any description exc 1 sqm and n exc 2 sqm each

Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm but not exc 2.0 Sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 15 to 20 mm thick, (table rubbed) (moulded exposed edge) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and rubbing and mirror polishing including screed bed of bedding layer of morter 15 mm thick in CM 1:6 etc complete all as specified and as directed

M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed.

M&L for Machine cut kota stone slab 15-20mm thick in skirting,riser of step with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and rubbing etc complete all as specified and as directed

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed

M & L, glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed.

M&L Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling and plugging holes etc . in apron complete all as specified and as directed.

M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

M&L for 12 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.

Material and Labour for rendering 15 mm thick in two layers consisting of first layer 10mm in CM 1:6 and top layer 05 mm thick in CM (1:4) plastering with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compund shall be measured and paid seprately.)

M&L for 5 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.

Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.

Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed.

Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed

Preparation of New plastered surfaces of ceiling and applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatement complete all as specified and as directed.

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed.

S & F Powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings suitable handle ( 2 no.) complete all as specified

S & F Powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings Nos in each door, 2 hinges suitable handle ( 2 no.) complete all as specified

S&F Powder coated (thickness of powder coating not less than 50 micron) anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specifed.

Supply and Fixing sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Material and Labour for applying a coat of polymer based water proofing compound as per manufaturer's instructions on new plastered surface of wall/ chajja ctc. complete all as specified and directed

M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.

S&F 24 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge.

M&L, 18 to 20 mm thick white Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length including taking down of existing roof sheet complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down of existing roof sheet all as specified and directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick AC boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

All as per item No 62 above but except material complete all as specified and as directed.

Supply & Fix Rolled mild steel framed work as in doors frame or gates of angle or other section with gusset plates, rails, braces etc.,compelete drilled for fixing of steel sheeting or other covering . Doors etc. to be prepared for hanging or sliding with and incl. either hooks and hinges or steel hanging door fittings (exclsive of steel sheeting or other covering , running rails and guides) and hanging, also fastening and fixing compelete

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and as directed

S&F Hard (drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed )not less than 0.9mm dia weight not exceeding 4.00 Kg per sqm including welding to existing frame work complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L, cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs Stop valves /Angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete.

Dismantling of water tank & n exc 500 ltr capacity in litres and removing to store

Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed

S&F in repairs 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S& F in repairs Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed.

S&F in repairs of 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes

S & F in repairs Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.

S&F in repairs 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed

S&F in repairs Sinks made of stainless steel 0.8 mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x160mm ,including cupling , west pipe etc complete all as specified and directed.

S&F in repairs kitchen plate rack of stainless steel of size 720mm x 600mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed.

S&F in repair 5.5mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed

S & F in repairs Aluminium peg sets of 6 pegs complete.

S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S&F in repairs 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed

Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S&F in repairs Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection , finisheed even and smooth without using extra cement complete all as specified and directed

M&L for 75 mm thick PCC 1:2:4 type B-2, (using 40mm graded stone aggregate as in paving/hard standing/path etc finished even and smooth without using extra cement incl dismantling etc .

Demolition of cement concrete (reinforced) in ground floor and pavings n.exc 15 cm thickness (below and above ground level) all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in manhole covers , shelves, chajjas etc and similar articles with plain faces set in CM 1:4 complete.

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

Ditto all as per item no 103 above but in except block

M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement work complete all as specified and as directed.

M&L for rubber moulded chequered cement concrete coloured tiles 25 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20 mm thick screed bed in CM 1:6 and incl dismantling completee all as specified and as directed.

Supply only water proofing compound ,complete all as specified and as directed

M&L for 15 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed.

Taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc by means of MS scrapper patty or any other suitable tools and removing to a distance 500 mtr from the starting point and depositing as directed.

M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm ,complete all as specified and as directed .

S&F in repairs curtain rod made of SS pipe dia of rod 25 mm with decorative brackets and ends complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, laid dry complete all as specified and directed.

M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in Cement mortar 1:6 complete all as specified and directed

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

M & L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work

M & L walling (Except stone) of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

M&L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed.

E&M Portion: Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

(b) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

(c) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

(d)All as per item 121.02 herein above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S&F in repair ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed

S&F in repair Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F in repair Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.

S&F in repair Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.

S&F in repair ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F in repair Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S&F in repair modular bell push 1 Module AC SP 240 volts flush type 5/6 Amps,moduler type single pole one way complete as all specified and directed.

S&F in repair bell electric multi music type, AC, SP 240 volts, sound as approved, complete as all specified and directed.

S & F in repair electronic modular fan regulator any type on the existing phenolic laminated sheet AC, SP 230 volts complete as all specified and directed.

S & F in repair white cover plate with frame modular type of 02 module complte all as specified and directed.

S & F in repair white cover plate with frame modular type of 03 module complte all as specified and directed

S & F in repair white cover plate with frame modular type of 04 module complte all as specified and directed.

S & F in repair white cover plate with frame modular type of 06 module complte all as specified and directed.

S & F in repair white cover plate with frame modular type of 08 module complte all as specified and directed.

S & F in repair white cover plate with frame modular type of 12 module complte all as specified and directed.

S & F in repair metal flush box modular type of 02 module complte all as specified and directed.

S & F in repair metal flush box modular type of 03 module complte all as specified and directed.

S & F in repair metal flush box modular type of 04 module complte all as specified and directed.

S & F in repair metal flush box modular type of 06 module complte all as specified and directed.

S & F in repair metal flush box modular type of 08 module complte all as specified and directed.

S & F in repair metal flush box modular type of 12 module complte all as specified and directed.

Supply and Fixing in repair LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

S&F in repair 10 W LED Lamp/bulb complete all as specified and directed.

S & F in repair 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S&F in repair recess mounting LED 2x2 luminaire 36W,6500K slim ceiling light with extruded aluminium housing and milky diffuser complete and including taking down old fitting all as specified and directed.

S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, including taking down complete all as specified and directed.

Material and Labour for earthing in repair complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

S&F in repair sheet metal enclosure with socket plug top and MCB with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and Fixing in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 guage sheet steel double door including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix for in repair of MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix in repair MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S&F in repair MCB Triple pole & Neutral 415 volts, 63 amps, of 10 KA complete all as specified and directed.

Supply and fixing Water heater storage type, electric,capacity 25 litres.BEE 5 star rated with grouting with four nuts and bolts,heating element 2.0 kw adjustable temperature setting knob for temp setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation with all accessories such as safety valve, thermostate,NRV complete with chromium plated flexible two number pipe connection for hot / cold water supply. Note:-Old U/S geyser will deposited in E/M Store yard.

Supply and fixing steel body exhust fan AC single phase 230/240V OF size 300 mm sweep with louvrs complete all as specified and directed.

Supply and fixing PVC fresh air fan, single phase 230/240 V OF size 250 mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

M & L for cutting, opening circular/ Rectangular in shape hole on wall of fixing of exhaust fan of size 300/200/450 mm sweep including plastering and making good the disturbed surface and surrounding complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 40 mm bore and connection including cleaning for refixing complete all as specified and directed.

M&L GI tubing medium grade complete with all fittings laid in trenches/ walls for the size 25 mm dia bore all as specified and directed by Engr-in-charge

M&L GI tubing medium grade complete with all fittings laid in trenches/ walls for the size 40 mm dia bore all as specified and directed by Engr-in-charge

S&F in repair Gun metal gate valve screwed both end with iron head wheel size 25 mm dia bore including suitable fittings all as specified and directed.

S&F in repair Gun metal gate valve screwed both end with iron head wheel size 40 mm dia bore including suitable fittings all as specified and directed.

M&L For cutting of existing pipe and making threading and sutable works for connection for pipe all as specified and directed by Engr-in-charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed by Engr-in-Charge.

Taking out old unserviceable Old LT cable any type and size from trenches or fixed on poles or through pipes/walls/laid under roads/paths/ drains/culverts complete all as specified and directed.

Supply and laying for XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection incliding levellling and consodilation complete all as specified and directed by EIC.

M&L for laying well burnt bricks,as in protection of cable laid dry, flat aboutting each other wide wise all as directed by Engineer-in-Charge.

S&f in repair GI tubing 40 mm dia light grade for cable protection all as specified and directed.

m/s bahadur singh samant

M/s Rana Enterprises