Repair/ Replacement including Tiling, Joinery,sanitary fittings, Roof treatment,plaster of 2/9 GR at Birpur under GE Dehradun.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed .

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified

Material and labour 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth complete all as specified

Material and labour 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair Complete all as specified

Material and labour 10 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified

Material and labour for preparation of newly plastered surface on ceilings and applying three coats of white wash on ceiling, off sets, pillar etc. all as directed and specified.

Material and labour for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc all as directed by the Engineer-in-Charge.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Square Meter over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Square Meter over new surfaces over applying of 1-1.5 mm thick wall care putty finish wall surface even and smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Square Meter over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Square Meter over new surfaces over applying of 1-1.5 mm thick wall care putty finish wall surface even and smooth complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of cement based paint over applying of 1-1.5 mm thick wall care putty finish wall surface even and smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coats of cement based paint over applying of 1-1.5 mm thick wall care putty finish wall surface even and smooth complete all as specified and directed.

Material and labour non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6-7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 17 here-in-before but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

Material and labour vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 Square Metre, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

All as per item No 20.00 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

Material and labour 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platfoRunning Meters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Material and labour grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

Material and labour for Machine cut kota stone slab flooring 15-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar 1:6 complete all as Specified.

Material and labour for Machine cut kota stone as in skirting 15-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as Specified.

Material and labour for heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 Square Meter, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for factory made pre polished rubber moulded vibromatic Chequred cement concrete colour tiles of size 30 cm x 30 cm and 22 to 25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

Material and labour Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

Demolition of Cement concrete of any description in any position not otherwise specially provided for Sunken floor etc complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

Material and labour 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Square Meter but n. exc. 2 Square Meter each complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc.n exc. 1 Square Meter complete all as specified

Taking down shutter of any description exc. 1 Square Metre but n. exc. 2 Square Metre each and removing from site complete all as specified

Taking down chowkhats or frames n. exc 1.5 Square Metre each without taking off shutter from the frame complete all as specified and directed.

All as per itme No 38.00 here in above but exc. 1.5 Square Metre but not exceeding 4 Square Metre each complete all as specified and directed.

Supply and fix 30mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified.

Supply and fix prelaminated Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with prelam sheet, PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fix Factory made prelaminated solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

Supply and fix Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate) complete all as specified and directed.

Supply and fix Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate) complete all as specified and directed.

Material and labour mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding complete all as specified

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified

Supply and fix factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete .all as specified

Supply and fix in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Square Meter in each pane complete all as specified

Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

Supply and fix in repair WPC board 18-19mm thick, one side laminated, medium density, flat pressed, single layer type or three layer type, BWR grade for Almerah doors, self, kitchen cabinet etc complete all as specified.

Supply and fix magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix Hasp and staple 75mm safety type, stainless steel with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

Supply and fix stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified

Supply and fix stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

Supply and fix stainless steel handles 125 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

Supply and fix 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed.

Material and labour floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

Supply and fix in 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Supply and fix in repair stainless steel barrel tower bolts 200 mm long one piece and fixed complete all as specified

Supply and fix in repair stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

Supply and fix 300mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed.

Supply and fix in repair 300mm long MS Helical door spring to steel chowkhat with same as but fixed to wooden door frame including roller and roller plate etc complete of approved quality.

Supply and fix in repair stainless steel handles 150 mm long one piece and fixed with screws/welded to frame , complete all as specified and directed.

Supply and fix in repair 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed.

Material and labour in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

Supply and fix in repair 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Material and labour applying two coats of Synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified

Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed..

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed

Material and labour applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces complete all as specified and directed.

Supply and fix in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm all as specified.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and directed.

Supply and fix 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fix 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified

Supply and fix in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fix in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

Supply and fix in repair75 mm bore UPVC (SWR) pipe pressure 4Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified

Supply and fix in repair 110 mm bore UPVC (SWR) pipe pressure 4Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified

Supply and fix in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed.

Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs brass chromium plated shower rose 125 mm size complete all as specified and directed by Engr-in-charge.

Supply and fix in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fix in Repair Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified.

Supply and fix in repair bib taps brass 15mm dia chromium plated as specified and directed.

Supply and fix in repairs health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charge.

Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

Supply and fix in repair looking mirror 450 x 600 mm x 5 mm thick mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified .

Supply and fix in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

supply and fix in brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and directed.

Supply and fix in repair 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed.

Supply and fix in repair Urinal (300 mm x 600 mm), bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes with Urinal partitions slabs teRunning Meterinating about 40cm above floor line and grating as specified and directed.

Material and labour cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.

Material and labour cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed by Engr-in-Charge.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed by Engr-in-Charge.

Material and labour in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed.

Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 15 mm bore size (Minimum weight 142 gms), complete all as specified and directed.

Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed.

Supply and fix in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed.

Supply & fixing tiled false ceiling of Everest Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 gRunning Meters, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to foRunning Meter a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to foRunning Meter grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips or 3mm dia GI wire spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm, all 'T'' sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.

Supply and fix powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with glass 5mm thick, fixed with glazing clips, aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed by Engr-in-Charge. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size : 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83 x 44.45 x 2.00 mm including 5 mm thick glass/ACP Sheet complete with aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber packing/aluminum beading etc. complete all as specified and directed by Engr-in-Charge. Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Removing the manholes covers (CI or RCC) any type of manholes rectangular/ circular and de-sluding /de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried (5000 ltr capacity)of out of MD land and making it fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge.(The quoted rate includes for keeping the particular septic tank and soakage well undertaken once for de-sludging/de-watering functional for full contract period)

Material and labour for 65 mm thick reinforced precast cement concrete 1:1:2 type B-1 (using 20mm graded stone aggregate) as in man cover bromatic slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary formwork including 2mm thick CR sheet with 2 coastly of bitumen paint and two nos PVC counter sunk handle 12mm dia to surface including demolition of existing cover slab, complete all as specified and directed.by Engr-in-charge.

Supply and fix mild steel TMT bar 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material and labour for taking down existing roof treatment of felt etc any thickness or description including cleaning all upto roof slab incluing removing spoil foRunning Meter site and Material and labour for providing roof treatment as per the following steps as directed by Engr-in-Charge:- i) Filling cracks of roof slab with approved chemical sealing compound and applying 15mm thick renedering in CM 1:4 over neat cement slurry @ 3.00 Kilogram/Square Meter over cleaned roof surface with use of approved water proofing compoung. ii) Applying a coat of cold applied bituminous primer @ 0.30 Kilogram/Square Meter followed by APP modified five layer polymeric membrane 3mm thick, minium weight 3.60 Kilogram/Square Meter reinforced with plyester non-woven fabric (weight not less than 150 gms/Square Meter) manufactured by M/s STP Ltd or M/s Texsa India Ltd, laid as per the manufacturers instruction with side over lap of 75mm and end over lap of 100mm and finally finished with super silver sheild @ 0.10 Ltr/Square Meter. Note : The work of water proofing treatment shall be got executed thorugh manufacturer or authorised applicator only.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Square Meter on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed by Engr-in-charge

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.

Supply and fix 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected by Engr-in-Charge

Material and labour for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cubic Meter, getting out, removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed by the Engr-in-Charge.

Supply and fix mild steel work as in post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. and flat iron fillets, 10 mm dia round bar, nut & bolts for securing wire mesh including all necessary drilling and bolting including embeding in concrete and similar work confiRunning Metering to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type weight exc 4 Kilogram per square metre as approved by Engineer-in-Charge.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight exc 4 Kilogram per square metre as approved by Engineer-in-Charge.

Dismantling fencing wire mesh including post/ struts if any type complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

(a) One light point point /bell buzzer point controlled by one-one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No 147 here-in-before but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm complete all as specified and directed.

All as per item No 147 here-in-before above but up to Sheet matel enclosure MCB DB with plug socket independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in existing PVC / Steel, concealed and existing MS boxes, mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following : Note: The wiring to be done as per IE rule and maintain colour code accordingly

(a) One light point point /bell buzzer point controlled by one-one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

(e) One light point controlled by two way switch

All as per item No 150 here-in-before but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm complete all as specified and directed.

All as per item No 150 here-in-before but up to Sheet matel enclosure MCB DB with plug socket independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Material and labour for point wiring with 2 single core FRLS/FR PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including PVC casing & caping/conduit with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complete with 1.5 sqmm PVC insulated unsheathed multistranded copper conductor 1100 volts grade green colour for earth continuity all a specified and directed

(a) All as per item Ser No 153 here-in-before but for one 5 Amp socket outlet independent all as specified & as directed by Engr -in-Charge.

(b) All as per item Ser No 153 here-in-before but for one 5 Amp socket outlet on the same board with other switches

(c) All as per item Ser No 153 here-in-before but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity all as specified and directed

Supply and fix switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

Supply and fix switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

Supply and fix socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

Supply and fix socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

Supply and fix Bell switch paino flush button type 5 Amp complete all as specified.

Supply and fix ding dong bell AC 230 V single pole complete all as specified and directed .

Supply and fix switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

Supply and fix step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts complete all as specified and directed.

Supply and fix ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC complete all as specified and directed.

Supply and fix lamp holder,pvc/polycarbonate type with back platesuitable for batten fittings complete all as specified & directed.

Material and labour sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in existing PVC / Steel concealed conduit. and one single core green colour PVC Insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sq. mm. as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

All as per ser item No 164 here-in-before but of size 6 Sq.mm. and 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed

Supply and fix sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

Supply and fix sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed.

Supply and fix MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed.

Supply and fix MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed.

Supply and fix MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

Supply and fix in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fix mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, Fixing and testing LED down lighter recessed mounted 2x2 feet 36W ultra modern designed LED luminaire which provide soft light and glair free symmetrical illumination suitable for grid ceiling and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed all as specified and directed.

Supply and fix high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Supply and fix high efficiency LED bulbs 1 X 9 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Material and labour for service cable 10x2 sq mm twin core Weather proof aluminium multistranded conductor cable PVC sheathed complete all as specified and directed.

All as per Item No 178 here-in-above but 6x2 sq mm complete all as specified and directed.

Supply and fix in replacement air ventilation fan matalic body 300mm, 900 RPM, single phase, 230V AC including necessary, Material and labour for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector all a directed by Engineer-in-charge. Note: old unserviveable fan shall be deposite in E/M yard.

Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.

Supply and fixing of LED tube rod 18/20 Watts single or double sided connections polycarbonate complete incl making connection alteration in existing tube light fitting complete all as specified and directed.

Supply and fix in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed ( Note: Old unserviceable ceiling fan will be deposited in E/M store yard. )

Supply and fixing, Connecting wall mounted fan oscillating type 400 mm sweep single phase 230 Volt complete all as specified and directed. ( Note: Old unserviceable Exhaust fan will be deposited in E/M store yard. )

Supply and fix in replacement of 3 core PVC insulated copper cable of size 40/0.0076 multi standard in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fix copper flexible wire hoisted twin cord 23/0076 for connection of ceiling fan etc complete all as specified and directed.

Supply and fixing fan capacitor 2.5/3.15 mfd make universal / Asian/Epcos .complete all as specified and directed

Supply and fixing fan capacitor 4 mfd complete all as specified and directed. make universal / Asian/Epcos

Supply and fixing heating element any type/size as per site requirement of capacity 2 KW complete all as specified and directed. Make:-Theta/Newton/Dasmesh/Bajaj

Supply and fixing thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed. Make: Dashmesh/Indofors/Donfoss/Bajaj

Supply and fix in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed. Make:- POLO/Havells/Prayag

Supply and fixing syphon assembly for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge. Make:- Dashmesh/Theta/Newton/Bajaj.

Supply and fixing pressure release valve as per existing make and size geyser spring loaded 15 mm dia complete all as specified and directed.

Supply and fixing rubber Gasket as per existing make/size site requirement suitable for 25/50 Ltr capacity geyser complete all as specified and directed.

Supply and fix in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed . ( Note: old unserviceable Geyser will be deposited in E/ M store yard )

Supply and fix PVC enclosure with plug and socket one single pole MCB 240 volts 20 Amp all as specified and directed.

Supply and fix plug top 3 pin 15 Amp in repair. complete all as specified and directed.

Material and labour in replacement sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, for sutable suitable size of 100x100mm including making good disturbed surface complete all as specifide and directed

All as per ser item No 198 here-in-before but 150 x 100 mm complete all as specified and directed.

All as per ser item No 198 here-in-before but 250x200 mm complete all as specified and directed..

All as per ser item No 198 here-in-before but 300x250 mm complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Note: (i) If the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of galvanised strip 32x6mm earth lead and 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item

All as per item No 202 here-in-before but earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm. bore and water pipe 20 mm. bore GI light grade with funnel and wire mesh, complete all as shown in elect plate No. 5 of SSR part I of 1991.

Supply and fix aluminium strip 32x6mm fixed in ground,on wall, pole with epoxy based insulator for down conductor including drilling two Nos holes at each joint, one set of lead washers between strips two sets GI nut, bolt, washers one set of lead washers between strips two sets GI nut, bolts, washers gutties, screws etc complete all as specified and directed by Engr-in-Charge .

Supply and fix Galvanised iron strip 32 x 6mm buried in ground complete all as specified and directed.

Supply and fix air termination single pointed aluminium rod of 12mm dia 300mm long fixed to aluminium strip 25x3mm drilling nuts, bolts washers for resting/supporting of air terminals etc complete all as directed by Engineer-in-Charge.

SRI GANESH ENTERPRISES

IMPERIAL ENGINEERS

VERDHMAN ASSOCIATES

M/s Teg Singh Negi

M/S C S AITHANI