Construction of Combined office building at Dada Siba, Tehsil Dehra, Distt. Kangra, HP (SH- Providing E.I. therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Make: KEI, L&T and Anchor

Group C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Make: KEI, L&T and Anchor

Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make: KEI, L&T and Anchor

2X1.5 sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make: KEI, L&T and Anchor

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make: KEI, L&T and Anchor

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make: KEI, L&T and Anchor

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. Make: KEI, L&T and Anchor

3X1.5 Sq mm

6X1.5 Sq mm

3x2.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- Make: Diplast, Finolex, BCC etc.

50 mm. dia

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Make: Legrand, L&T and Schneider

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying & fixing following size modular base and cover plate on the existing modular metal boxes as required:- Make: Legrand, L&T and Schneider

Modular base and cover plate, 12 module

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. Make: Legrand, L&T and Schneider

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. Make: Legrand, L&T and Schneider

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -16 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Make: Legrand, L&T and Schneider

Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand, L&T and Schneider

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand, L&T and Schneider

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Make: Legrand, L&T and Schneider

Double door-4 way

Double door-8 way

Double door-12 way

Double door-16 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 185 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Make: KEI, Polycab, Havells

Armoured cable 150 sq. mm (3.5 core)

Armoured cable 185 sq. mm (3.5 core)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Makes:- Usha,Bajaj,Crompton or any other approved make.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Mirror light 460 mm, single lamp.(Category-A)

Providing and fixing surface mounted Square/Round downlighter with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 20 watt (2000 Lumen) 4000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Surface mounting Square/Round downlighter 20 watt

Makes:- Panasonic (Cat No PDLM10204BS),Bajaj,Wipro,Philips or any other approved make.

Providing, Installation, testing and commissioning of ceiling fan with two module modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Category-A

Makes:-Usha Technix Plus 3 Star Rating, Bajaj,Crompton, or any other approvred make.

Providing and fixing indoor decorative aluminium extruded LED Batten Light of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Batten Light 40 Watt

Makes:- Clair (Cat. No. ZD-LTD010-40W), Bajaj,Panasonic or any approved make.

Providing and fixing indoor decorative aluminium extruded LED Batten including tube rod 18 watt and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Batten for T8 Tube Light with tube rod

Makes:- Bajaj (Cat. No. BLRB DB 118 ),Tube rod(Cat. No.BLRB 18W CWi) ,Panasonic or any approved make

Supplying,testing and commissioning of cubical type,Indoor type, Single door, floor mounted, fixed type, free standing single front, dust proof & compartmentalized Main L.T. cum meter panel made out of M.S. CRC Sheet 16G , Base frame 50X50X5MM duly painted with Siemens Grey Powder Coated Paint as per specification & Drawings, approximate size (H)1650MM X (W) 1300MM (D)400 MM and Assembly Charges of 400A 4 sTRIP Copper Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ MCB and MCCB/MCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc and Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/ tested from CPRI lab and conforming to IS 64139.

MATERIAL:

OUTGOING

MCCB 250A 4P 36KA TMR With O/L & S/C Protection,Spreader Link MCCB 250A 4P 1 No,MCCB 63A 4P 25KA TMR with O/L & S/C Protection 1 No.Spreader Link MCCB 63A 4P 1 No.MCCB 63A DP 10KA 4 Nos.,,Space for KWH Meter 4 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Makes for MCCB : Schneider/L&T/ABB .

Supplying, Installation, Testing and Commissioning of cubical type,Indoor type, Single door, floor mounted, fixed type, free standing single front, dust proof & compartmentalized Heating Load Panel made out of M.S. CRC Sheet 16G duly painted with Siemens Grey Powder Coated Paint as per specification. Appropriate size (H)1800MM X (W) 1050MM (D)350 MM and Assembly Charges of 250A 4 sTRIP Copper Busbar ( Horizontal/Vertical) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ MCB and MCCB/MCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and and the panel should be approved/ tested from CPRI lab and conforming to IS 64139.

MATERIAL:

MAIN INCOMER :- MCCB 250A 4P 36KA TMR With O/L & S/C Protection 1No.,Spreader Terminal MCCB 250A 4P 1No.

OUTGOING :

MCCB 200A 4P 25KA TMR With O/L & S/C Protection 1No., Spreader Link MCCB 200A 4P 1Nos.,MCCB 63A 4P 18KA TMR with O/L & S/C Protection 2 Nos., Spreader Link 63A 4P 2 Nos.,Space for KWH Meter 3P 1 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc, For Light load Incomer 40/63/100 A

Makes for MCCB : Schneider/L&T/ABB .

Providing and fixing LED Bulk head of following rating made of aluminium housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Bulk head fitting 10 watt

Makes:- Philips,Panasonic(Cat No.-PBHM01107),Bajaj ,Wipro or any other approved by Engineer-in-Charge.

Providing and fixing surface mounted power coated white CRCA full glow LED panel 1'X4' suitable for surface application and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Surface mounted power coated white CRCA full glow Panel 36 Watt-1'X4'

Makes:-Bajaj (Cat. No. BZSSLL 36W LED WH i),Philips,Panasonic,Wipro or any other approved make.

Providing and fixing surface mounting LED 2X2 luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for surface application with the use of the latest technology 43 watt (4300 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Surface mounting 2X2 Flat Panel

Makes:- Bajaj (Cat No BCTBLS 43W ZT WH),Panasonic,Philips,Wipro or any other equivalent approved make.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 pole MCCB incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-2+12 way (MCCB+6+36) module.

Makes:-Hager (Cat No:- VYP12DM),L&T,Legrand or any other approved make.

Supplying and fixing Power unit 25 Amps.switch & one no. socket modular type including the modular box , complete with connections, testing and commissioning etc. as required.

Make:- ABB, L&T, Legrand ( As Per Legrand Cat No. 673016) or any other approved make.

Supplying and fixing of Rubber mat 1X2 Mtrs long and 12 mm thick in the front of Main panel etc. as required including carriage of material with in all leads and lifts.

UNITED ENGINEEER AND CONTRACTOR

JAMWAL ELECTRICAL WORKS