Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC | ₹2.3 L | L1 | Accepted-AOC Technically qualified L1 bidder. |
| Sl No | Description | Qty | Unit | Composite Engineers L1 |
|---|---|---|---|---|
| 1.00SITC of 2.0 TR Cassette type unit, Daikin make connected with existing outdoor circuit at New Technology Building, lIT Roorkee | ||||
| 1.01 | SITC of 2.0 TR 4- way flow VRVNRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise
fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fIre on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of27 Degree C DB and 19 Degree C WB temperature. (+/- 5% tolerance in nominal capacity may be accepted.)
make: Daikin. | 1 | No. | 75,000 ₹96,000 Lowest |
| 1.02 | SITC of Corded remote controls with holder etc. As required. | 1 | No. | 4,000 ₹5,120 Lowest |
| 2.00SITC including vaccumiazation and Nitrogen testing of following nominal sizes of softlhard drawn copper refrigerant piping for VRVNRF system, complete with fIttings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specifIed thickness as given below for Suction and Liquid lines, all accessories as per specifIcations etc. as required | ||||
| 2.01 | 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation, make: Raico Metal/ Mandev/ Maxflow / Uniflow | 10 | m | 700 ₹8,260 Lowest |
| 2.02 | 15.86-15.9 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 25 mm thick insulation, make: Rajco Metal/ Mandev/ Maxflow / Uniflow | 10 | m | 900 ₹10,620 Lowest |
| 2.03 | Supply and laying of Copper conductor, XLPE insulated, Un-armored, PVC sheathed cable, l100V grade, 2 core 1.5 mm2 on existing RCC / HUME / METAL Pipe. of suitable size or as directed by the Engineer-Incharge, complete in all respects. The armoring of the cable shall be properly connected with the earth conductor as required etc. make : Finolexl RR Kabel/ KEI/ Havells/ Polycab. | 15 | RM | 250 ₹4,425 Lowest |
| 2.04 | Nitrogen testing, pressure testing and vacuum of the system. | 1 | Job | 10,000 ₹11,800 Lowest |
| 2.05 | Supply and charging R410 gas. (As per OEM) | 80 | Kg | 1,000 ₹94,400 Lowest |
Tender Value
Refer Docs
Closing Date
3 Oct 2024, 3:00 pmClosed
Deputy Registrar
Material Management, IIT Roorkee
Installation of HVAC Work
2024_IITR_826415_1
2024250236/MM-27/IWD/268
Open Limited
Miscellaneous Goods
Supply
IIT Roorkee
Please refer Enquiry Letter
5 documents required · 5 mandatory
₹0
Exempted
6 Aug 2025
17 Sept 2024
3 Oct 2024
17 Sept 2024
3 Oct 2024
20 Sept 2024
17 Sept 2024 - 19 Sept 2024
Amount
SITC of 2.0 TR Cassette type unit, Daikin make connected with existing outdoor circuit at New Technology Building, lIT Roorkee
SITC of 2.0 TR 4- way flow VRVNRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fIre on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of27 Degree C DB and 19 Degree C WB temperature. (+/- 5% tolerance in nominal capacity may be accepted.) make: Daikin.
SITC of Corded remote controls with holder etc. As required.
SITC including vaccumiazation and Nitrogen testing of following nominal sizes of softlhard drawn copper refrigerant piping for VRVNRF system, complete with fIttings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specifIed thickness as given below for Suction and Liquid lines, all accessories as per specifIcations etc. as required
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation, make: Raico Metal/ Mandev/ Maxflow / Uniflow
15.86-15.9 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 25 mm thick insulation, make: Rajco Metal/ Mandev/ Maxflow / Uniflow
Supply and laying of Copper conductor, XLPE insulated, Un-armored, PVC sheathed cable, l100V grade, 2 core 1.5 mm2 on existing RCC / HUME / METAL Pipe. of suitable size or as directed by the Engineer-Incharge, complete in all respects. The armoring of the cable shall be properly connected with the earth conductor as required etc. make : Finolexl RR Kabel/ KEI/ Havells/ Polycab.
Nitrogen testing, pressure testing and vacuum of the system.
Supply and charging R410 gas. (As per OEM)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_868456.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .