Construction of MPDO Building at Munchingiputtu of Kinchaiputtu GP Munchingiputtu Mnadal of ASR District

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc.,complete for finished item of work but excluding dewatering charges etc., as per SS 20 B. The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS 308)

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402)

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402)

Vibrated Reinforced Cement Concrete M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, Seigniorage charges for finished item of work. The rate including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402) for footings

Vibrated Reinforced Cement Concrete M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, Seigniorage charges for finished item of work. The rate including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402) for Pedastals

Vibrated Reinforced Cement Concrete M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, Seigniorage charges for finished item of work. The rate including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402) for Plinth Beam

Vibrated Reinforced Cement Concrete M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, Seigniorage charges for finished item of work. The rate including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402) for Columns (Below pilth & Above Pilth )

Vibrated Reinforced Cement Concrete M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, Seigniorage charges for finished item of work. The rate including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402) for Roof Beams

Vibrated Reinforced Cement Concrete M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, Seigniorage charges for finished item of work. The rate including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402) for Roof Slab 125mm thick

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 225 x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 501 & 504).

Filling with Selected earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., and Contractor profit & Over head charges but excluding seigniorage charges and GSTetc., complete for finished item of work(APSS No. 402)(APSS NO. 309 & 310)

Supplying , Fitting and Placing Fe 500 HYSD Bar Reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc., complete for finished item of work including cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST