Electrician Trade Items

Amount

ELECTRICIAN TRADE ITEMS

Contactor 3 Ph., 415V, 25 Amp. And 2 NO & 2 NC Auxiliary Contacts : (As per Specifications) 02 nos. each

Contactor 3 Ph., 440V, 32 Amp. and 2 NO & 2 NC Auxiliary Contacts : (As per Specifications) 02 nos. each

Limit Switch Liver operated 2A 500V two contacts:- (As per Specifications)

Cut out Relay 16A, 440V :- (As per Specifications) 02 nos. each

PIN Type, Shackle Type, Egg Type Suspension Type Insulators including Hardware Fittings:- (As per Specifications) 02 nos. each

Hand Drill Machine 0 to 6 mm Capacity :- (As per Specifications)

Laboratory Type Induction Coil 1000W, 230-10,000V (As per Specifications)

A. Earth Plate (Copper): (As per Specifications) B. Earth Plate (G.I.): (As per Specifications) 01 nos. each

Earth electrode (Copper and G.I.): (As per Specifications)

Rheostat Sliding Type 0-25Ω, 2Amp. :- (As per Specifications) Rheostat Sliding Type 0-300Ω, 2Amp. :- (As per Specifications) Rheostat Sliding Type 0-1Ω, 10Amp. :- (As per Specifications) 01 nos. each

Rubber Mat 25mm thick size 2’x4’: (As per Specifications)

Electrician Helmet: (As per Specifications)

RCC Pole with Accessories ( MS Angle, C-clamp, Stay Insulator etc.) and Material. Size 6Meter Long, Suitable for LT Line. (As per Specifications)

Ohm Meter, Series Type :- (As per Specifications) Ohm Meter, Shunt Type:- (As per Specifications) 02 nos. each

Digital Multi meter 3½ Digit :- (As per Specifications)

Voltmeter M.I. Multirange 0-75-150-300-600 V.A.C. :- (As per Specifications)

Milli Voltmeter Centre Zero 100-0-100 mV. Portable Lab Type :- (As per Specifications)

Ammeter MC 0-500 mA. Portable Lab Type :- (As per Specifications) Ammeter M.C. 0-5 Amp. Portable Lab Type :- (As per Specifications) Ammeter M.C. 0-25 Amp. Portable Lab Type :- (As per Specifications) 02 nos. each

AC Ammeter M.I. 0-1 A. Portable Lab Type :- (As per Specifications) A.C. Ammeter M.I. 0-5 A. Portable Lab Type :- (As per Specifications) A.C. Ammeter M.I. 0-25 A. Portable Lab Type :- (As per Specifications) 06 nos each

K.W. Meter 0-1.5-3 KW (Analog Type) :- (As per Specifications)

Digital Wattmeter: (As per Specifications)

A.C. Energy Meter (Single Phase 10 Amp. 240V.):- (As per Specifications)

A.C. Energy Meter (Three Phase 15 Amp. 440V.):- (As per Specifications)

Three Phase Power Factor Meter (Digital):- (As per Specifications)

Frequency Meter :- (As per Specifications)

Magnetic Flux Meter :- (As per Specifications)

LUX meter :- (As per Specifications)

Techo Meter (Analog) :- (As per Specifications)

Digital Techo Meter (Photo Sensor Type) :- (As per Specifications)

Tong Tester /Clamp Meter 0-100 Amp AC Digital :- (As per Specifications)

Megger 500 Volts :- (As per Specifications)

3 Point DC Starter :- (As per Specifications)

4 Point DC Starter :- (As per Specifications)

Wheatstone Bridge Complete with Galvanometer and Battery (As per Specifications)

Single Phase variable Auto Transformer :- (As per Specifications)

Phase Sequence Indicator: (As per Specifications)

Growler :- (As per Specifications)

Resistance type starter 3 Phase 400V. 50 Cycle 5 HP:- Direct On Line Starter 3 Phase 400V. 50 Cycle for 2to 5 HP Motor:- Star Delta Starter Manual Type 3 Phase 400V. 50 Cycle for 5 HP Motor:- Star Delta Starter Semi Automatic Type 3 Phase 400V. 50 cycle for 5 HP Motor :- Star Delta Starter Automatic Type 3 Phase 400V. 50 cycle for 5 HP Motor:- Soft Starter 3-Phase :- Auto Transformer Type Starter 3 Phase 400V. 50 cycle for 5 HP Motor:- (As per Specifications) 01 nos. each

Oscilloscope 20 MHz Dual Trace :- (As per Specifications)

Function Generator (Triangular, Square and Sine Wave) :- (As per Specifications)

Soldering Iron 25 W. :- Soldering Iron 65 W. :- Soldering Iron 120 W. :- (As per Specifications) 02 nos. each

Temperature Controlled Soldering Iron: (As per Specifications)

Discrete Component Trainer :- (As per Specifications)

Linear I.C. Trainer :- (As per Specifications)

Digital I.C. Trainer :- (As per Specifications)

Electric Hot Plate Induction Type 1500W, 240V with Temperature Control :-(As per Specifications)

Electric Kettle 1500W, 240V :- (As per Specifications)

Electric Iron 750W, 240V :- (As per Specifications)

Immersion Heater 1500W, 240V :- (As per Specifications)

Ceiling and Table Fan AC 240V:- (As per Specifications) 01 nos. each

Geyser 10 litre 240 V. (Storage Type) :- (As per Specifications)

Mixture & Grinder :- (As per Specifications)

Washing Machine :- (As per Specifications)

Motor Pump Set 1 HP, 1 Phase, 240 V :- (As per Specifications)

Oil Testing Kit: - (As per Specifications)

Inverter 1 KVA Input 12 Volts DC, Output 220 Volt AC with 12 Volt Batteries: - (As per Specifications)

Voltage Stabilizer 600VA– Input 150-250 VAC, Output 240 VAC,10A :- (As per Specifications)

DC Power Supply 0-30 V, 5A. :- (As per Specifications)

Battery Charger 0-6-9-12-24-48V, 30A :- (As per Specifications)

Current Transformer 415 volt 50 HZ CT ratio 25/5Amp. 5 VA. :- (As per Specifications)

Potential Transformer 415 volt 50 HZ PT ratio 440/110V, 10VA :- (As per Specifications)

Solar Panel with Battery 12V,18 Watts :- (As per Specifications) 01 set

Desktop Computer Intel core i7 Configuration with 18.5 inch Monitor :- (As per Specifications)

Laser.Printer :- (As per Specifications)

DC Shunt Generator, 2.5 K.W. 220V. with prime mover and Control Panel :- (As per Specifications)

Motor Generator (AC to DC) Consisting of: - (As per Specifications)

DC Compound Generator, 2.5 KW, 220 V. with prime mover and Control Panel Including, Voltmeter, Ammeter and Circuit Breaker. Control Panel for DC Compound Generator, (As per Specifications)

DC Series Motor coupled with Spring Balance Load, 2.5 KW, 220 Volts (As per Specifications)

DC Shunt Motor 220 Volts 2.5 KW with Control Panel for DC Shunt Motor (As per Specifications)

DC Compound Motor with Starter and Switch 220 Volts, 2.5 KW (As per Specifications)

MG Set (DC to AC) Consisting of–Motor Shunt, 5HP 440 V. with starting compensator and switch directly coupled to generator AC 3. 5 KVA 400/230 V., 3Ph., 4 wire, 0.8 PF, 50 cycle with exciter and one switch board mounted with regulator, circuit breaker, ammeter, voltmeter, Frequency meter Knife blade switches and fuses etc. set complete with fixing bolts, foundation bolts and flexible coupling . (As per Specifications)

Motor AC Squirrel Cage, 3- Ph 415 Volt, 50 Cycles, 5 HP with Star Delta Starter and Triple Pole Iron Clad Switch Fuse with Mechanical Load:- (As per Specifications)

Motor 5 HP 400V, 3 Ph. 50 Cycles, AC Phase, Wound Slip Ring Motor with Starter and Switch:- (As per Specifications)

Universal Motor 1 HP 240V, 50 Cycles with Starter/Switch :- (As per Specifications)

Synchronous motor 3 Phase , 3 HP, 440V, 50Hz, 4 Pole, with Accessories:- (As per Specifications)

Thyristor /IGBT Controlled D.C. Motor Drive 1 HP with Taco- Generator Feedback Arrangement :- (As per Specifications)

Thyristor/IGBT Controlled AC Motor Drive with VVVF Control, 3 Phase 2 HP Motor :- (As per Specifications)

Transformer Single Phase, 1KVA, 240/115V, 50 Cycles, Core Type, Air Cooled :- (As per Specifications)

Transformer Three Phase, 3 KVA 415/240 Volts, 50 Cycles, Delta and Star, Shell Type Oil Cooled :- (As per Specifications)

Electrical Machine Trainer – (As per Specifications) 01 for 8 (4+4) units

Diesel Generator 7.5 KVA, 415 V AC 3 Phase with Change Over Switch, Over Current Circuit Breaker and Water-Cooled with Armature, Star-Delta Connections: - (As per Specifications)

Used DC generators-series, shunt and compound type for overhauling practice (As per Specifications) 01 nos. each (total 03)

Motor Series A.C. Type with Mechanical Load 1 HP, 240V, 50 Hz :- (As per Specifications)

Single Phase Capacitor Motor 1 HP 240 Volt 50 Cycles, with Starter and Switch :- (As per Specifications)

Manual Motor Coil Winding Machine with Step Arbor: (As per Specifications)

Ceiling Fan Coil Winding Machine 250V, 50 Hz, 1-Phase with Speed Control: (As per Specifications)

Primary Current Injection Set 220V, 50 Hz 1-Phase, Output Current 200A (Min.) with Timer (As per Specifications)

Stepper Motor with Digital Controller: - (As per Specifications)

Shaded Pole Motor: - (As per Specifications)

SMART METER (As per Specifications) 01 nos. each

EV CHARGER 3PHASE (As per Specifications)

EV CHARGER HOME 1PHASE (As per Specifications)

Work Bench 2500 x 1200 x 750 mm : (As per Specifications)

Wiring Board 3Mtr x 1Mtr. With 0.5 Mtr projection on the top :- (As per Specifications)

Instructor table : - (As per Specifications)

Instructor Chairs : - (As per Specifications)

Metal Rack 100 x 150 x 45 cm :- (As per Specifications)

Lockers with 20 Drawers (Standard Size) :- (As per Specifications)

Almirah 2.5 x 1.20 x 0.5 meter :- (As per Specifications)

Writing Board with Vitreous Enamelled Steel Sheet Top Surface 4’x6’ feet :- (As per Specifications)

Fire Extinguishers ( CO2 Type) :- (As per Specifications)

Fire Buckets With Stand :- (As per Specifications)