Providing new roof over the open terrace at Convention Centre Dhauladhar Dharamshala Distt. Kangra H.P.

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 0.62mm thick Tata Durashine or equivelent make prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating sheet should have protective guard film of 25 microns minimum to avoid scratches during trasportation any should have to supply in single length upto 12 metre or as desired by Engineer-In-Charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 15 cm wide 90 cm overall rectangular pre-painted plain sheet 0.47 mm gutter with iron brackets 40x3mm size bolts and nuts and washers etc including making necessary conections with water pipe complete as per design as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing flushing 38 cm overall 0.62mm thick prepainted plain sheet in roofing Tata Durashine or equivalent make with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 300mm wide Pre-painted PGI sheet 0.47 mm thick in eaves board/facial/ soffits/ceiling incluidng cutting fixing and welding to steel roof members and complete as per the instruction of Engineer-In-Charge (base members of steel work shall be measured & paid for separately) including carriage of materials within all leads, lifts and heights.

Providing and fixing LINAR sheet 0.37 mm thick of approved make in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (base members of steel work shall be measured & paid separtely) including carriage of materials within all leads, lifts and heights.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In beams joists channels, angles, Tee, flats with connecting plates or angle cleats as it main and cross beams, hip and jack rafters, purlins connected to common rafters, purlins connected to common rafters and the like as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing structure glazed wall with Aluminium frame 2"x2" having 16 Gauge panels 4'x2' each including 5mm thick blue intelo/reflecto glass all over area and two flip windows shutters in each floor of Kitchen corridor for cross ventilation location as per site, as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights. (Jindal/Hindalco or equivalent make

Providing and fixing scafolding for exterior work referred above 18' feet width and 30' to 40' feet in height approximately complete as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

AJAY KUMAR GOVT. CONTRATOR (BID ID -489697)

SHASHANK KUMAR (BID ID -490693)

BUILDTECH SOLUTIONS (BID ID -490871)