15th FC Light Work 3

Supply & fixing of 5 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (Sh. Item No 641)

Supply & fixing steel tubular pole 7 Metre long designated 410 SP-2 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (Sh. Item No 603)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT-AAA (Sh. Item No 1423)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 15 A TPN (Sh. Item No 807 d(ii)

Supply and burying earth electrode for lighting conductor of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineerin-charge complete in all respect.(Sh. Item No 706)

Supply & fixing of 100 mm x 110 mm shackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect.(Sh. Item No 621)

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . (Sh. Item No 622)

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 4 sq. mm (Sh. Item No 504 a)

Fabrication, supply, installation and commissioning of 3D LED sign boards fabricated out of 3mm thick blue coloured acrylic sheet and base 4mm ACP sheet (out door, with IP-65) for institutional buildings and gates of Jamia Hamdard with timer (on each board) of L & T equivalent ACP sheet of Indo-born or equivalent. ACP sheet fitted on double frame fabricated out of 32mm X 32mm MS Square pipe, having 3” depth. All five sides of frame covered with ACP Sheet and back side covered with 26 guage GI sheet. Acrylic letters fabricated out of 3mm thick acrylic A Grade/imported sheet, having minimum 2” depth. Text matter alphabets raised 2 ½” . LED modules of Resang/ powered by Samsung or equivalent make with IP-65 grade to eliminate the letter to the satisfaction of Engineer In-charge. Power supplies/drivers must be IP-65 of Brylite/Hi sign/ Neon Pro make.warranty period of two years. With fitting on supporting pole gate on road. all work complete in all respect as per direction of engineer-in-charge

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(Sh. Item No 501 i)

Speed Technology