CA NO GE SOUTH AMB 45 2021 2022 SPECIAL REPAIRS TO OR MARRIED ACCN BLOCK NO P 153 01 TO 06 AND P 149 01 01 TO 06 OF GAJRAJ COMPLEX OF 40 ARTY DIV PRO UNIT UNDER GE SOUTH AMBALA CANTT

Amount

SCHEDULE A PART I (B&R WORKS) Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exceeding 250 mtr and not exceeding 500 mtr complete all specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement complete all specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without extra cement complete all specified and directed.

Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying three coats of whitewash on ceiling complete all specified and directed.

Material and labour for preperation of old decorated brick/concrete, plastered or unplastered surfaces of ceiling by brooming down with steel wire brushing,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of OBD on ceiling complete all specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of OBD with hand roller, over a coat of alkaline resistant primer including chalk whitening prepatory to distempering, complete all specified and directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all specified and directed.

Material and labour for complete removal of existing treatment on surfaces of walls by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface and applying two coats of oil bound distemper with hand roller, over a coat of primer complete all as specified and directed.

Material and labour for preparation of old decorated brick/concrete plastered/unplastered surfaces of walls, pillars, cornices by booming down with steel wire brushing, scraping down smoke soot moulds, moss and efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint on the wall/pillar/cornices complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exceeding 250 mtr and not exceeding 500 mtr complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in mask concrete, foundation, sub base to floor etc. complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base over 25mm thick PCC (1:2:4) type B1 (using 12.5 mm graded stone aggregates) set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid on vertical surfaces of skirting/dado, over and including cement screed bed 10mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in cement mortar (1:3) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality coloured Glazed ceramic tiles in vertical surface 300x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed or bedding layers in CM 1:3 including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour of Granite (of black shade) tiles 16-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of edges over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exc 6 mtr mean radius built in CM 1:6 including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for brick work (except bricks) straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 (old size brick) including demolition of old brick /stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for 40 mm thick averaging PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding, levelling course, including providing neat cement slurry @ 3Kg/Sqm even and smooth top surface of PCC to receive the APP including hacking of joint of brick tiles/roughing of existing cement concreat surfaces including removal of tree embedded below brick tiles and making good to receive PCC padding complete all specified and directed.

Material and labour for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP and two coats water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed. NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.

Material and labour for cement concrete 1:2:4, type B2 (using 20 mm graded stone aggregate) as in surface channels and drains etc finished even and soomth without using extra cement complete all specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all specified and directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing in repair Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. including making good the disturbed portion, PCC 1:3:6 type C-1 filling as in bed blocks of holdfasts/lugs all as shown on drawing No. TD-219 (c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, 10mm dia MS square bars grills. (iii) Glazing, wire mesh & painting grill shall be measured & paid for separately.

Supply and fixing of pressed steel frames for doors of size 125x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer, complete all as specified and as directed.

Supply and fixing of factory made 40mm thick, second class hard wood rail and style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces complete as all specified and directedThe size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as all specified and directed.

Supply and fixing of 35mm thick glazed and skeleton shutters of second class soft wood, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc complete as all specified and directed.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete as all specified and directed.

Supply and fixing for sheet glass 3mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel windows, complete all as specified and as directed.

Supply and fixing Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staple with beads to wooden joinery when fixed in panels of joinery and with screws when fixed to steel windows, complete all as specified and as directed.

Material and labour for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hook and pintle hinges, clamps; hold fasts; wall ties; conforming to Fe-290 Gde-E-165 complete as all specified and directed

Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description, not exceeding 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0 complete all as specified and directed.

Supply and fixing of factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.

Supply and fixing of Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges complete all as specified.

Supply and fixing of 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete as all specified and directed

Supply and fixing of 250mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete as all specified and directed

Supply and fixing of 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete as all specified and directed

Supply and fixing of extruded aluminium alloy handles, 125 mm long, fabricated type, anodised, ISI Marked complete, all as specified and as directed.

Supply and fixing in repair of harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Material and labour in replacement for aluminium anodised, tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed.

Material and labour for floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm complete all as specified and as directed.

Supply and fixing of stainless steel sink with draining board, made out of 1mm thick sheet of grade SS 304, for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm including waste pipe and waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in replacement of stainless steel plate rack made of 1mm thick sheet of grade SS 304, of size 750 x 600 x 200mm, weighing not less than 5.0 Kg each and fixed with stainless steel screws to wall complete all as specified and directed.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Refixing old serviceable steel water tubing of 15 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Refixing old serviceable steel water tubing of 20 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing in replacement of 15mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of bib taps, 15mm bore, long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg.

Supply and fixing (in repair) angle cock, 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with capstain head, heavy with adjustable wall flange, and removal old complete all as specified and as directed. (Note : Weight of angle valve shall not be less than 0.575 Kg)

Supply and fixing in repair vitreous china wash hand basin flat back, white of size 550X400mm including 15mm bore pillar tap cast copper alloy fancy type with capstan head chromium plated screwed down screwed high pressure wiith or without letter hot or cold with long screwed shank and fly nuts, 32mm bore PVC waste pipe, 45cm long PVC connection and CP waste coupling/fitting and a pair of cast iron brackets of suitable size complete all as specified and as directed.

Supply and fixing of vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe including taking down existing WC etc. complete all as specified and as directed.

Supply and fixing in repair brass CP shower rose 125mm size with or without swivel joints any size including fixed to steel pipe or union as directed.

Supply and fixing in replacement of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repairs, chromium plated soap dish with fitting fixed with brass screws complete all as specified and as directed.

Supply and fixing of PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint laid in floor or trenches including taking down existing pipe of any description complete all as specified and directed.

Supply and fixing of PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint fixed to wall including taking down existing pipe of any description complete all as specified and directed.

Supply and fixing of PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint fixed to wall including taking down existing pipe of any description complete all as specified and directed.

Supply and fixing of PVC (SWR) bends any radius, for 75mm bore of pipe complete all as specified and as directed.

Supply and fixing of 75mm dia PVC (SWR) vent cowl fixed with adhesive complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removal of debries to distance exceeding 250 mtr not exceeding 500 mtr complete all as specified and directed.

Material and labour for PCC(1:2:4) type B0, using 12.5mm graded stone as in coping for interlocking pathway, complete all as specified and directed.

Material and labour for 75mm thick PCC 1:4:8 type D-2 using 40mm graded mechanically crushed stone over compacted earth complete all as specified and as directed.

Supply and fixing PCC coloured, rubber moulded, interlocking designer paver blocks in any and shape, confirming to IS-15658-2006 of 40mm thickness, M-35 grade in path, hard standing, etc. laid over and including 50 mm thick rammed bedding layer of sand, complete all as specified and directed.

Supply and fixing mild steel framed work as in door chowkats, gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing including dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Supply and fixing of 0.80 mm thick mild steel plain black sheeting as in covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

SCHEDULE A PART I (E&M WORKS) Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25 mm dia with FRLSH accessories, concealed and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point/bell point controlled by one switch. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

Description all as per item No 75.00 above but for socket out let point 5 Amps on same board, complete all as specified and directed.

Description all as per item No 75.00 above but for socket out let point 5 Amps on independent board, complete all as specified and directed.

Description all as per item No 75.00 above but for one bell point controlled by one bell push complete all as specified and directed.

Description all as per item No 75.00 above but with 2.5 Sqmm cable for 3pin 15 Amps switch socket outlet (Power Point), complete all as specified and directed.

Supply and fixing of switch piano 5/6 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing of switch piano 15 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing of bell push 5 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing of socket outlet 3 pin 6 amps, 230 volt. flush type, ISI Marked, complete all as specified and directed.

Supply and fixing of outlet 2 in 1, 3 pin 5 /15 Amp and multi pin flush type, complete all as specified and directed.

Supply and fixing of door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed.

Supply and fixing of fan regulator electronic step type, 230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and directed.

Supply and fixing of lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing of LED lamp 9 Watt for batten fittings, complete all as specified and directed.

Dismantling and taking down ceiling fan any type and capacity cleaning and keeping in safe custody for re-use including re-fixing after rewiring complete all as specified and directed.

Supply and fixing of channel for fixing of LED tube rod, aluminium housing body in CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. NOTE: - Tube rod shall be measured and paid for separately.

Supply and fixing of 18 W/ 20W Polycarbonate LED tube light, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. Note: - Tube rod must be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact for fixing in existing LED fittings.

Supply and fixing of decorative surface mounted LED tube light fitting with high efficient diffuser mirror light 2 feet length, aluminium housing in CRCA body suitable and including 10 watt LED tube high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing of bulk head light fitting, 15 watt, energy efficient with lamp 15 watt with provision of 2/3 core PVC copper conductor cable 1.50 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing in replacement bracket for security light made up of 25mm dia, 0.9 metre long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Supply and fixing LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W eachand having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.

Supply and fixing sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 200 amps rated bus bar IP 43 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole, 125 Amps, 25 KA as incomer and MCBs as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface including taking down existing unserviciable MCCB/DBs including MCBs complete all as specified and directed.

Supply, installation, testing of SPN distibution board 8 way,double door , IP 43, as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed.

Supply and fixing MCB, single pole, 240 volts, 5 to 32 Amps capacity, 10kA rupturing capacity, B Curve fixed in DBs with suitable size copper lugs complete all as specified and as directed.

Supply and fixing MCB, single pole and neutral link, 240 volts, 40 Amps capacity, 10kA rupturing capacity, B Curve fixed in DBs with suitable size copper lugs complete all as specified and as directed.

Supply and fixing MCB, single pole, 240 volts, 40 Amps capacity, 10kA rupturing capacity, B Curve fixed in DBs with suitable size copper lugs complete all as specified and as directed.

Supply and fixing in repair sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts complete all as specified and directed.

Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sqmm drawn in and including rigid non metallic PVC medium grade 20 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated, stranded copper conductor FRLSH of 2.50 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.

Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.

Taking out old unserviceable earthing and material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh, 50 mm thick precast RCC 1:2:4 type B1using 20 mm graded stone aggregate , reinforced with 8 mm dia dedormed /TMT bars 3 nos both way 12 mm dia round bar handle and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009(Part-I) complete all as specified and as directed by Engineer-in-charge. Note :- (i) Earth lead wire and its protection pipe upto and including 7.50 mtr only from top of earth electrode are included under this item. (ii) On testing if the earth resistance is not obtained within permissible limit, earthing will be re-done at NO extra cost ,till the desired earth resistance is obtained. (iii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted.

Taking down exhaust fan of any size/ sweep after disconnecting the wire from existing ceiling rose dismentaling of blades and deposited to store for repair all as specified and directed.

Refixing of exhaust fan with louvers 300 mm sweep, 1400 RPM, metal body with louvers after repair work including servicing, greasing and fixing arrangement complete all as specified and directed.

Supplying, laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade, cross-sectional area 25sq mm x 4 core laid in trenches,road, floors, pole, walls etc including taking down old unserviceable existing cable complete all as directed

Supply and fixing for GI protection pipe of 40 mm dia light grade for cable protection including all fittings laid in trenches or fixed on pole, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes etc not exceeding 10 Square metre on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

Material and labour for unwashed dry sand cushioning for cable protection, filling in trenches/ducts complete all as specified and directed.

Material and labour for old size bricks sub class 'B' for cable protection laid along length of cable complete all as specified and directed.

Material and labour for hanging only ceiling fans (taking down for repair work) including provision of cable from ceiling rose after servicing and painting with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed.

Supply and fixing of heavy duty exhaust fan with louvers 300 mm sweep, 1400 RPM, metal body with super enameled copper winding wire motor suitable for 1 Phase 230V, AC connections and making suitable hole in existing cement concrete / brick walls built in cement mortar 1:4 and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surfaces to match with the existing surface including plastering as required & finishes including grouting four Nos rag bolts, nuts & washers and connecting with 0.75 Sqmm PVC insulated and sheathed 3 Core copper cable including testing & commissioning after installation at site complete all as directed.

Taking down carefully geyser 25 Ltrs capacity of any type with connection and keeping in safe custody for repair work and re-fixing alongwith its connection after completion of work complete all as specified and directed.

Supply and fixing temperature resistent SS braided pipe suitable to sustain pressure up to 8 bar not less than 60 Cm long suitable for incoming & out going connections of Geyser with washer etc. complete including taking down existing PVC connections any type complete all as specified and as directed.

Supply and fixing in repair stop valve 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed.

Note : - Amount of credit of Rs. 85,380.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 19(R) and 20(R) of tender documents in pdf form which will be deducted offline while acceptance of tender.

Gupta Enterprises

PARVEEN KUMAR

bhagwandasswazirchand

M/S JAISANT CONSTRUCTION CO.

S S Engineers & Contractor