Development Work Of GVP Point, As Per Various Location Chart, Upleta. Under Nirmal Gujarat 2.0 Grant (Second Call)

NAME OF WORK: DEVELOPMENT WORK OF GVP POINT, AS PER LOCATION CHART, AT.

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

9 Schedule - "B"- 9

10 Schedule - "B"- 10

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage

(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our

Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 7,89,908=00 Put to Tender Rs. 7,89,908=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Dr. Trambadiya Road, Opp. Prabhat Transportation, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 3.88 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 2.58 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 4.00 8080.00 Nos

Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with

6-8 branches and lush green foliage in g. bags of size 25 cm as per direction

of the officer-in-charge. 4.00 106.05 No

Providing, Fixing of KEC Round M.S. Wire Tree Guard

Shape of Frame Round

Crack Resistance Yes

Corrosion Resistance Yes

Shelf life (years)

Finish Red-Oxide Primer

Frame joining to form Tree Guard For joining angle iron frames together

Mesh Aperture Size (mm x mm) 75 X

Item Description Quantity Rate Per Amount

Frame Material Mild Steel

Number of frames required to form Tree Guard

Diameter/Width of Frame (mm)

Height of the frame / Mesh (excluding legs) (mm)

Height of the Legs (mm)

Number of cross supports in each frame NA

Material of the Mesh M.S. Wire

Shape of Mesh Hole Hexagonal

Wire Mesh thickness (mm)

Overall Weight 6 4.00 2272.50 No

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Railway Station Road, Behind Govt. Hospital At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 1.80 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.20 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

20 MM thick sand faced cement plaster on walls upto height 10meters above

ground level consisting of 12 MM thick backing coat of Cement Mortar 1:3 (1-

Cement : 3-Sand) and 8MM thick finishing coat of Cement Mortar 1:1 (1-

Cement : 1-Sand) etc. complete. 16.00 330.72 Sqmt.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Drawing picture on existing wall including finishing surface and all paint,

colour and required material and as per guide nagarpalika engineer (Related

swachchha bharat mission, climate exchage and other save water etc)

Removing and scraping of old deteriorated plaster of any thickness fromm

wall / R.C.C member including stacking of serviceable material and disposal

of unserviceable from site of work with all lead and lift 16.00 20.84 Sqmt.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Kachara Daya Chowk, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.45 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.63 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with

6-8 branches and lush green foliage in g. bags of size 25 cm as per direction

of the officer-in-charge. 16.00 106.05 No.

Providing, Fixing of KEC Round M.S. Wire Tree Guard

Shape of Frame Round

Crack Resistance Yes

Corrosion Resistance Yes

Shelf life (years)

Finish Red-Oxide Primer

Frame joining to form Tree Guard For joining angle iron frames together

Mesh Aperture Size (mm x mm) 75 X

Frame Material Mild Steel

Number of frames required to form Tree Guard

Diameter/Width of Frame (mm)

Height of the frame / Mesh (excluding legs) (mm)

Height of the Legs (mm)

Number of cross supports in each frame NA

Material of the Mesh M.S. Wire

Shape of Mesh Hole Hexagonal

Wire Mesh thickness (mm)

Overall Weight 6 16.00 2272.50 Nos

Item Description Quantity Rate Per Amount

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontan lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples

including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C1:5:10 etc complete. 22.00 391.93 Rmt

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Near Keshariya Hanuman Mandir, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Near Kamleswar Mahadev Mandir, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Near Railway Station, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Yadav Street, Near Shital Icecream Shop, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Near Sanskar Kendra, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Javahar Road, Near College Gate, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- DEVELOPMENT WORK OF GVP POINT

Location :- Smashan Road, Near Sartaj Pan Shop, At. Upleta

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including ramming the excavated stuff and despositing on the

road side slope as directed up to all lead. 2.25 114.44 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 1.50 3260.28 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete

block 60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS

15658:2006 including 35mm sand layer for levelling and filling the joints with

sand in proper line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe

Gauge Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters Bench Type Integrated Seat and Back, Seating

Capacity 3 Seater, Stand/Legs Design Decorative, Finsh Powder Coating,

Back Rest With Arm Rest With Colour of Seat and Back As per buyer's

Dimensions Total Height 915 millimeter Seat Height 400 millimeter Width

millimeter Total Area Required 1500 millimeter

Generic Warranty 1 year Weight Bearing Capacity 150 kilogram

Test Reports Test reports to be furnished to buyer on demand NA Availability

of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 Nos

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with

phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm

as required; painted with best quality epoxy coatings in black and white bends.

the details of symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing tec. complete under the

supervision of engineer in charge. (A) Engineer Grade (VR)

Item Description Quantity Rate Per Amount

Supplying and erecting LED Solar street lights with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W

and 6 mtr poles complete erected 1.00 36154.97 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 4 &

6 mtr pole) 1.00 809.01 No.

Total Amounts Rs...………........

Total Amounts Rs...………........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika