REPAIR MAINTENANCE OF WOODEN STEEL FURNITURE HELD AT GE DEHU ROAD

Amount

CHAIR DINING (FD-279):-Removing of unserviceable/broken parts of Chair dining without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified. (a) Rear leg of size 890x55x30mm (Drg No.FD-279)

(b) Front leg of size 460x55x30mm (Drg No.FD-279)

(c) Side/Front/Rear rails of size 420x30x65mm (Drg No.FD-279)

(d) Back rest of size 420x45x15mm (Drg No.FD-279)

(e) Stiffener (Side & Central one) of size 420x25x20mm (Drg No.FD-279)

(f) Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair dining. (Drg No.FD-279)

(g) Tightening of all parts/joints of whole Chair dining with bamboo pins. (Drg No.FD-279)

CHAIR EASY (FD-229):-Removing of unserviceable/broken parts of Chair Easy without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.(Drg No.FD-229) (a) Front/Rear leg of size 490x55x25mm

(b) Front/Rear stiffener. (Drg No.FD-229)

(c) Arms of size 610x65x25mm. (Drg No.FD-229)

(d) Front & back rail of seat/back of size 510x55x25mm. (Drg No.FD-229)

(e) Side rail of seat/back. (Drg No.FD-229)

(f) Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak made to shape and size complete all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No.FD-229)

(g) All as per Srl. Item No. 13 here-in-before but back frame of chair easy. (Drg No.FD-229)

(h) Tightening of all parts/joints of entire Chair Easy with bamboo pins. (Drg No.FD-229)

CHAIR DINNING CUSHIONED (FD/MAP-II/04):-Removing of unserviceable/broken parts of Chair dining cushion of size 450x400x770mm without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified. (a) 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM).(Drg No. FD/MAP-II/04)

(b)Supply and fixing only seat cover to tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM). (Drg No. FD/MAP-II/04)

(c) Front leg of size 450x35x50mm (Drg No. FD/MAP-II/04)

(d) Rear leg of size 450x35x50mm (Drg No. FD/MAP-II/04)

(e) Back Vertical stripps 500x15x50mm (Drg No. FD/MAP-II/04)

(f) Back rest 450x25x45mm (Drg No. FD/MAP-II/04)

(g) Stiffener (Side & Central one) 450x20x25mm (Drg No. FD/MAP-II/04)

(h) Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. (Drg No. FD/MAP-II/04)

CHAIR EASY CUSHIONED:- (FD-358) Removing of unserviceable/broken parts of Chair easy cushion of size 545x510x740mm without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg, specified and as directed by Engr-in-Charge (a) 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM as approved by GE).(Drg No. FD-358)

(b) All as per srl item No 24 here-in-before but back of chair easy cushioned. (Drg No. FD-358)

(c) Supply and fixing only seat cover to tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM). (Drg No. FD-358)

(d) Front leg of size 545x70x25mm (Drg No. FD-358)

(e) Rear leg of size 545x70x25mm (Drg No. FD-358)

(f) Back frame of size 545x55x20mm (Drg No. FD-358)

(g) Side rail of size 545x70x25mm (Drg No. FD-358)

(h) Arms of size 545x65x25mm with cushion (Drg No. FD-358)

(j)Tightening of all parts/joints of entire Chair easy cushion with bamboo pins. (Drg No. FD-358)

CHAIR VARANDAH:- (FD-359, FD/MAP-II/06) Taking down and removing the old cane and PVC seat back of Chair Verandah and recanning with new half round 4mm wide plastic cane in oval shape with mat pattern . (Plastic cane shall be of white colour of Make: Shah/Premier/ Maharashra Poly Cane) complete all as specified and as directed by the Engineer-in-Charge. (Drg No. FD-359, FD/MAP-II/06)

Supply and fixing of PVC seat and back 4mm thick to Chair verandah after removing old/broken PVC seat and back. Weight of 4mm thick seat and back of Chair Verandah is not less than 1.85Kgs each. (Make of seat and back of chair verandah is AMKO/Comfo/Harmony). (Drg No. FD-359, FD/MAP-II/06)

Supply and fixing in replacement of 20mm dia 16 guage stiffener conduit pipe with electric welding to seat of chair verandah including made to shape and size with frame and as directed by Engr-in-Charge. (Drg No. FD-359, FD/MAP-II/06)

M & L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. (Drg No. FD-359, FD/MAP-II/06)

Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 20mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge. (Drg No. FD-359, FD/MAP-II/06)

Supply and fixing in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete all as directed by Engr-in-Charge.(Drg No. FD-359, FD/MAP-II/06)

CHAIR WRITING (FD-280) :- Removing of unserviceable/broken parts of Chair Writing without damaging of other parts of chair writing, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified. (Drg No. FD-280) (a) Rear leg of size 890x30x55mm

(b) Front leg of size 460x55x30mm (Drg No.FD-280)

(c) Side/Front/Rear rails 530x30x65mm (Drg No. FD-280)

(d) Back rest of size 530x25x20mm (Drg No. FD-280)

(e) Stiffener (Side & Central one) of size 530x25x20mm (Drg No. FD-280)

(f) Arms 470x60x25mm (Drg No. FD-280)

(g) Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair Writing. (Drg No. FD-280)

(h) Tightening of all parts/joints of whole Chair Writing with bamboo pins. (Drg No. FD-280)

M & L painting to frame of chair verandah with white synthetic enamel paint including preparation of surface. (after removing of the cane) and provide 04 Nos PVC shoes of white colour to legs of chair Verandah as specified and directed by Engr-in-Charge. (Drg No. FD-359, FD/MAP-II/06)

Material and labour for French polishing to chair Easy after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces and provided 04 Nos nylon buffers with steel screw to legs of chair easy complete all as directed by Engineer-in-Charge. (Drg No. FD-229)

All as per Srl item No 48 here-in-before but chair dinning. (Drg No. FD-279)

All as per Srl item No 48 here-in-before but chair writing. (Drg No. FD-280)

All as per Srl item No 48 here-in-before but chair dining cushioned. (Drg No.-FD/MAP-II/04)

All as per Srl item No 48 here-in-before but chair easy cushioned. (Drg No. FD-358)

CHAIR DINNING (FD/MAP-II/05) :-Removing of unserviceable/broken parts of Chair dining without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified. (Drg No. FD/MAP-II/05) (a) Rear leg.

(b) Front leg. (Drg No. FD/MAP-II/05)

(c) Side/Front/Rear rails. (Drg No. FD/MAP-II/05)

(d) Back rest. (Drg No. FD/MAP-II/05)

(e) Stiffener (Side & Central one). (Drg No. FD/MAP-II/05)

(f) Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair dining.(Drg No. FD/MAP-II/05)

(g) Tightening of all parts/joints of whole Chair dining with bamboo pins. (Drg No. FD/MAP-II/05)

(h) S&F in replacement of PVC seat 4mm thick with holes & screwed with frame all as per drg or as directed by Engr-in-Charge. (Drg No. FD/MAP-II/05)

TABLE DINNING 6/8 PERSON (FD-273, FD/MAP-II/03) Supply and fixing in replacement of top of table dining 6 persons of size 1500x900mm made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including 4mm thick TW edging alround to top to table dining 6 persons of size and shape all as shown on drg. (Drg No. FD-273, FD/MAP-II/03)

All as per Srl. Item No. 61 but top of Table dining 8 persons of size 1800x900mm. (Drg No. FD-273)

Replacement of legs of table dinning 6/8 persons with new legs of size 75x40x750mm made of 1st class hard wood teak, size and shape all as shown on drg. (Drg No.FD-273,FD/MAP-II/03)

All as per Srl. Item No. 63 but long rails for 6 persons size and shape all as shown on drg. (Drg No. FD-273, FD/MAP-II/03)

All as per Srl. Item No. 63 but long rails for 8 persons.(Drg No. FD-273)

All as per Srl. Item No. 63 but side rails for 6/8 persons. (Drg No. FD-273, FD/MAP-II/03)

All as per Srl. Item No. 63 but wooden bracket of size 100x100x25mm for table 6/8 persons. (Drg No. FD-273)

TABLE PEG (FD-236 & 277) :- Supply and fixing in replacement of top of table peg with new top of size 450x300mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround all as shown on drg. (Make of MDF board:- Action(Tesa)/Greenply/Archidply) (Drg No.FD-236 & 277)

Supply and fixing in replacement of legs of peg table with new leg of size 50x30mm made of 1st class hard wood teak size & shape as shown on drg. (Drg No.FD-236 & 277)

All as per item No 69 here-in-before but long batten/rail of size 50x25mm of table peg. (Drg No.FD-236 & 277)

All as per item No 69 here-in-before but short rail/stiffener of size 50x25mm of table peg. (Drg No.FD-236 & 277)

TABLE WRITING (FD-249 & 275) Supply and fixing in replacement of top of table writing with new top of size 1145x550mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround to top of table writing size and shape all as shown on drg . (Make of MDF board:- Action(Tesa)/Greenply/Archidply) (Drg No.FD-249 & 275)

Supply and fixing in replacement of legs of table writing with new leg of size 60x30x750mm made of 1st class hard wood teak size and shape all as shown on drg. (Drg No.FD-249 & 275)

All as per Srl. Item No. 73 but stiffners (Centre) of size 50x25x 1145mm made of 1st class hard wood teak. (Drg No.FD-249 & 275)

All as per Srl. Itme No. 73 but side stiffener/rails of size 50x25x550mm of Table writing. (Drg No.FD-249 & 275)

S & F in replacement of drawers with new drawers made of 18/19mm thick MDF board exterior gde natural teak face shade on front side including with 6 mm thick MDF borad to bottom of drawers including aluminium anodised knob and all as shown on drg. (Drg No.FD-249 & 275)

S & F in replacement of entire cup board of table writing made of 18/19mm thick MDF board exterior gde including wall catcher size and shape all as shown on drg. (Drg No.FD-249 & 275)

All as per Srl. Item No. 77 but door shutter of cupboard. (Drg No.FD-249 & 275)

TABLE DRESSING GENTS WITH MIRROR (FD-230) Supply and fixing in replacement of looking mirror to table dressing gents with new looking mirror 5 mm thick of Make:- Saint Gobain/Modi Guard of size and shape as shown on drg and as directed by Engineer -in- Charge. (Drg No.FD-230)

S & F in replacement of entire cabinet/box made of 12mm thick MDF board teak face shade exterior gde including 4mm thick TW edging all as shown on drg (Drg No.FD-230)

Supply and fixing in replacement of drawers to table dressing gents of 12mm thick MDF board teak face shade exterior gde including 4mm thick TW edging including aluminium anodise knob(dark black) all as specified and shown on drg. (Drg No.FD-230)

Supply and fixing in replacement of frame of mirror made of 1st class hard wood teak incl key plate size and shape as shown on drg. (Drg No.FD-230)

Supply and fixing in replacement of back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg. (Drg No.FD-230)

SIDE BOARD (FD-241) Supply and fixing in replacement of unserviceable pair of shutters of side board made out of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including continuous piano type hinges and hasp & stapple of size and shape all as spd and shown in drg including aluminium anodized knob as shown on drg. (Drg No.FD-241)

All as per Srl item No 84 here-in-before but side of side board all as shown on drg. (Drg No.FD-241)

All as per item No. 84 here-in-before but top of side board. (Drg No.FD-241)

Supply and fixing in replacement bottom of side board made out of only 18/19mm thick MR Gde plywood of size and shape shown on drg. (Drg No.FD-241)

Supply and fixing in replacement of back of side board with 6mm thick MR Gde plywood of size and shape all as sqd and shown on drg. (Drg No.FD-241)

Supply and fixing in replacement drawers of side board made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg. (Drg No.FD-241)

Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beadling all as shown on drg. (Drg No.FD-241)

Supply and fixing in replacement of leg with batten frame of side board made of 1st class hard wood teak of size and shape as shown on drg. (Drg No.FD-241)

SOFA SET 5/4 SEATER (FD-373) Supply and fixing in replacement of front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg. (Drg No.FD-373)

All as per item No. 92 here-in-before but arms. (Drg No.FD-373)

All as per item No. 92 here-in-before but side rails. (Drg No.FD-373)

All as per item No. 92 here-in-before but front & back rail of single seater sofa. (Drg No.FD-373)

All as per Srl item No 92 here-in-before but front/back rail of sofa three seater (long seat). (Drg No.FD-373)

Removing the old cane from various chairs and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ Maharashra Poly Cane) complete all as specified and as directed by the Engineer-in-Charge. (Drg No.FD-229, FD-279 & FD-280)

Material and labour for french polishing with best quality french polish on exposed surfaces to Chair dining upto good looking after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (Drg No. FD/MAP-II/05)

All as per Srl. Item No. 98 here-in-before but table dinning 6/8 persons. (Drg No. FD-273, FD/MAP-II/03)

All as per Srl. Item No. 98 here-in-before but Table Peg (Drg No. FD-236 & 277)

All as per Srl. Item No. 98 here-in-before but Table Writing (Drg No.FD-249 & 275)

All as per item No 98 here-in-before but Table dressing gents. (Drg No. FD-230)

All as per item No 98 here-in-before but Side Board (Drg No. FD-241)

All as per item No 98 here-in-before but Sofa set 5 seater. (Drg No. FD-373)

All as per item No 98 here-in-before but Sofa set 4 seater. (Drg No.FD-373)

M&L for fixing of hard PVC shoes to legs of any type of wooden furniture with screw all as directed by Engr-in-Charge. (Drg No.FD-TP)

CHAIR COMPUTER (TP) :- Supply and fixing in replacement of seat of chair Computer made of 75mm thick cushioned 32 density covered with new tapestory cloth with rubber bedding complete all as directed by Engr-in-Charge. (Tapestory cloth shall not be less than Rs 350/-per RM) (Drg No.TP)

All as per Srl item No. 107 here-in-before but back of chair Computer. (Drg No.TP)

Supply and fixing in replacement of hydraulic system of chair Computer complete all as directed by Engr-in-Charge. (Drg No.TP)

Supply and fixing in replacement of arms of chair Computer all as directed by Engr-in-Charge. (Drg No.TP)

Supply and fixing in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair Computer complete all as directed by Engineer-in-Charge. (Drg No.TP)

TROLLEY FOR TV (FD/E6/MAP/04(R) : Supply and fixing of broken glass shutter 5.5mm thick openable of size 300x600mm with megnatic cather all as shown on drg and directed by Engr-in-Charge. (Make-Modiguard/Atul/Saintgobin) (Drg No.FD/E6/MAP/04(R))

Supply and fixing in replacement of unserviceable side of TV Trolley of sze 500x700mm made of 19mm Pre-laminated particle board exterior grade alongwith 4mm wide hard wood side beading all as shown on drg and directed by Engr-in-Charge. (Make-Eco Board/Assocates/Action) (Drg No.FD/E6/MAP/04(R))

Supply and fixing in replacement of unserviceable top of TV Trolley of size 600x750mm made of 19mm Pre-laminated particle board exterior grade alongwith 4mm hard wood side beading all as shown on drg and directed by Engr-in-Charge. (Make-Eco Board/Assocates/Action) (Drg No.FD/E6/MAP/04(R))

All as per item ser No 114 here-in-before but bottom of TV Trolley of size 500x650mm.

Supply and fixing of unserviceable wheel of TV Trolley all as shown on drg and directed by Engr-in-Charge. (Drg No.FD/E6/MAP/04(R))

CHAIR WRITING / VISITOR STEEL (TP) :- Supply and fixing in replacement of seat of chair Writing/Visitor made of 75mm thick cushioned 32 density covered with new tapestory cloth and rubber bedding complete all as directed by Engr-in-Charge. (Drg No.TP)

All as per Srl item No. 117 here-in-before but back of chair Writing/Visitor. (Drg No.TP)

Supply and fixing in replacement of arms of chair Writing/Visitor all as directed by Engr-in-Charge. (Drg No.TP)

Supply and fixing in replacement of broken steel frame complete of chair Writing/Visitor all as directed by Engineer-in-Charge. (Drg No.TP)

M & L for black painting to frame of Chair Writing/Visitorl with synthetic enamel paint of black colour and providing 04 nos rubber shoes to legs all as specified and as directed by Engr-in-Charge. (Drg No.TP)

CHAIR REVOLVING HIGH/ MEDIUM BACK (TP) Supply and fixing in replacement of seat of chair revolving short/medium back made of 75mm thick cushioned 32 density covered with new tapestory cloth and hard PVC bedding complete all as directed by Engr-in-Charge. (Tapestory cloth shall not be less than Rs 250/- per RM) (Drg No.TP)

All as per Srl item No. 122 here-in-before but back of chair revolving high/medium back. (Drg No.TP)

Supply and fixing in replacement of hydraulic system of chair revolving high/medium back complete all as directed by Engr-in-Charge. (Drg No.TP)

Supply and fixing in replacement of arms of chair revolving high/medium back all as directed by Engr-in-Charge. (Drg No.TP)

Supply and fixing in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair revolving high/medium back complete all as directed by Engineer-in-Charge. (Drg No.TP)

CHAIR CB STEEL WITH ARM/WITHOUT ARM (FD-75(M) :- Removing the broken seat and replacing it with new seat woven with 2mm wide plastic cane of primier /shah/Maharastra Polycane Industries brand as per Godrej pattern to be fixed with 04 Nos machine nuts and bolts of size 85x4 mm with washer to Chair CB Steel with arm/ without arm, frame of seat shall be made of best quality 2nd class seasoned hard wood ,free from knots and infection all as specified and shown on drg and shall be painted with two coats of black synthetic enamel paint over a coat of wood primier. (Drg No.FD-75(M).

All as per Srl item No. 127 here-in-before but back of Chair CB Steel with arm/without arm.(Drg No. FD-75(M)).

Supply and fixing in replacement of chair CB Steel with arms of seat made of 12mm thick plywood MR Gde with new cushion 32 density 50mm thick duly covered leatherite rexine as per existing shape and size all as directed by Engr-in-Charge. (Make of U Foam:- Kurl-on/Sleep Well/ Cor-Foam). (Drg No. FD-75(M)).

All as per Srl. Item No. 129 here-in-before but back of Chair CB Steel with arms. (Drg No. FD-75(M)).

Supply and fixing in replacement of flat iron cleat made of 50x25x3mm under the seat of chair CB steel with/without arm with electric welding all as directed by Engr-in-Charge. (Drg No. FD-75(M)).

Supply and fixing in replacement of arm to chair CB steel with arms of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint over a coat of pink primer and as per directed by Engr-in-Charge. (Drg No. FD-75(M)).

Supply and fixing in replacement of unserviceable portions of frame of Chair CB Steel with arms/without arms with 25mm round conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge. (Drg No. FD-75(M).

ALMIRAH LARGE/ MEDIUM STEEL (FD-1031, 1032, 1033 and 1034) :- Supply and fixing in replacement of legs of almirah large/medium steel with new legs made of 1mm thick M S sheet duly spray painted with synthetic enamel Olive Green paint two coats over a coat of red oxide primer. (Drg No. FD-1031 & FD-1032)

All as per item No 134 here-in-before but lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - Godrej/Harrison/Link) (Drg No. FD-1031 & FD-1032)

All as per item No 134 here-in-before but handle mild steel CP 100mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. (Drg No. FD-1031 & FD-1032)

Supply and fixing in replacement of shelf of almirah large/medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. (Drg No. FD-1031 & FD-1032).

Supply and fixing in replacement of unserviceable locking device with new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed by Engr-in-Charge. (Drg No. FD-1032).

All as per Srl. Item No. 138 here-in-before but almirah large Steel. (Drg No. FD-1031)

Supply and fixing in replacement of door shutter of almirah medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. (Drg No. FD-1032)

All as per Srl. Item No. 140 here-in-before but almirah large Steel.(Drg No. FD-1031)

TEAPOY VARANDAH (FD-255) :- Supply and fixing in repairs top of teapoy verandah of size 900x450mm with 18mm thick plywood MR grade with 1.00mm thick laminated sheet in white shade including 4mm thick teak wood edging all around all as specified and shown on drg. ((Make of Plywood:- Kitply/Archidply/Centuryply) (Drg No.FD-255)

Supply and fixing in repairs legs frame U Type of teapoy verandah with 19mm dia MS round pipe 1.6mm wall thickness all as specified and shown on drg. (Drg No.FD-255).

TABLE 900x600x760mm WITH/WITHOUT DRAWERS ABD 900x900x760mm STEEL (FD-1007,FD-1008 and FD-1009, CCE/KLP/12) Supply and fixing in replacement top of table 900 x 600 x 760mm with/without drawers steel with 19mm thick pre-laminated particle board exterior grade one side teak face edging alround teak wood beading 4mm wide all as shown on drg and directed by Engineer -in-Charge.(Make:- ECO Board/Associates/Action)

All as per Srl. item No. 144 but Table 900x900x760mm Steel. (Drg No. FD- 1009)

Supply and fixing in replacement of legs and stiffeners of table 900 x 600 x 760mm with/without drawers steel with new leg made of 25mm square conduit pipe 1.6mm wall thickness duly electric welding complete size and shape all as shown on drg and directed by Engr-in-Charge. (Drg No. FD- 1007 & 1008)

Supply and fixing new H type stiffener for jointing legs of 25mm square conduit pipe of 1.6mm wall thickness shall be welded to support the legs of the table at appropirate height as directed by Engineer-in-Charge. (Drg No.FD-1009)

Supply and fixing in replacement drawers of table 900 x 600 x 760mm with drawers made out of 1mm thick MS sheet size and shape all as specified and shown on drg. (Drg No.FD-1008)

Supply and fixing in replacement lock brass of table 900x600x760mm with drawers with duplicate key for four leaver size and shape all as specified and shown on drg. (Make of Lock:- Godrej/Harrison/Link) (Drg No.FD-1008)

M & L for painting to frame of chair CB Steel with arms/withour arms with synthetic enamel olive green paint including preparation of surface with rubbing with emery paper and providing 02 Nos PVC cap at top of seat frame of MS pipe and 04 Nos PVC shoes with steel screw at bottom of frame of MS round pipe as specified and directed by Engineer-in-Charge. (Drg No.FD-75(M).

M & L for spray painting to frame of Table 900x600x760mm with/without drawers steel with synthetic enamel paint of OG colour and providing rubber shoes to legs of table all as specified and as directed by Engr-in-Charge. (Drg No.FD-1007 & 1008, CCE/KLP/12)

All as per item No 151 here-in-before but Table 900x900x760mm Steel. (Drg No.FD-1009).

Spray painting to Almirah Medium Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required, complete all as specified and directed by Engineer-in-Charge. (Drg No.FD-1032)

All as per Srl item No.153 here-in-before but spray painting with synthetic enamel Olive Green paint externally portion only to almirah medium steel. (Drg No.FD-1032)

Spray painting to Almirah Large Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. (Drg No.FD-1031).

All as per Srl item No. 155 here-in-before but spray painting with synthetic enamel Olive Green paint externally portion only to almirah Large steel. (Drg No. FD-1031)

All as per Srl. Item No. 155 here-in-before but tepoy verandah with white paint including providing of 04 Nos. rubber shoes to legs of teapoy. (Drg No. FD-255)

DR J S CHADHA AND SONS

Imprint Digitech