REPAIRS TO JOINERY, FLOORING AND CERTAIN MISC B/R WORKS AT OMQ AND SMQ AREA AT AF STATION-II UNDER GE (AF) JAMNAGAR NO.2

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Brickwork or stone/ boulder/block masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles etc complete including removing the debris to outside MD land all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debris to a distance exc 1.5 Km but n.exc 3 Km complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description n exc 1sqm each.

Taking down shutters of any description exc 1sqm but n.exc 2.00 sqm each.

M & L 2nd class hard wood scantling in unframed work (clean sawn) complete all as specified and directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fitted to chowkhats complete all as specified and directed.

M&L for factory made 30mm thick Glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Fixing only Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. Note: The fixing shall be carried only after making necessary repairs such as welding, hinges replacement etc. No extra cost shall be admissible on this account

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and & sketch shown in section 8 of SSR part I.

S&F Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, suppling & fixing in the frame including butt hinges-03 Nos, Aluminium 02 Handles (100mm), and Aluminium tower bolt-150mm at site as per specification complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed in position complete all as specified and directed.

S&F in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed to aluminium window sliding / fix type or wooden door / window including rubber bead joining cleat for fixing in position complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 350x 250x 7 mm/ 450X 350X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M & L to Cement concrete in cills for hold fast, filling and mass concrete type B-0, (1:2:4), (12.5mm graded stone aggregate) complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates, hook and pintle hinges: large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete.

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 15 to 25 micron of approved colour) three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed.

(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

S&F aluminium powder coated (minimum thickness of powder coating 15 to 25 micron of approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete. Note:- (i) Section No given above are of make Jinal, Contractor may use similar section of other make mention in Appx B

S&F Stainless steel curtain rods of 25mm dia including taking down the existing.

S&F SS ornamental stainless steel holding brackets for 28mm dia scurtain rods.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 100 mm size stainless steel handle cast type complete all as specified and directed.

S&F 75 mm size Stainless steel butt hinges medium weight, fixed to chowkhats complete all as specified and as directed.

S&F floor door stopper 140 mm cover plate of aluminium alloy body, double leg type with hard rubber shoe fixed to door complete all as specified and directed.

S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 100 mm size mild steel butt hinges medium weight, fixed to chowkat all as specified and as directed.

S&F for aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) of size 300 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M & L for aluminium anodised handles for doors 150 mm long fabricated type all as specified and directed.

M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debris to a distance exc 1.0 Km but n.exc 2.0 Km all specified and directed.

M&L for rendering 15 mm thick on PCC block masonry wall surface in cement mortar (1:6), finished even and smooth without using extra cement all as specified and directed

M&L for one coat of synthetic enamel paint over wooden surfaces including preparation of old painted surfaces over 10 cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly or untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160 x 160 x 90mm embedded in the wall complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete including 15 mm size pillar tap, cast copper alloy, chromium plated with capstan head, screwed down high Pressure, screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete.

Preparation of new plaster surfaces of walls soffits, facia roof and applying one coat of weather proof acrylic based paint (100% arylic) over a coat of primer all as specified and directed by Engr-in-Charge. Make: Nerolac (Exel), Asian Paint (Apex ultima), Dulux (weather shield water proof), Berger (weather coat all guard).

S& F 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lapping on edge including taking down old plywood complete all as specified and directed.

S& F 12 mm thick plywood (07 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lapping on edge including taking down old plywood complete all as specified and directed.

M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

M&L for teak wood Lipping 6mm thick fixed to 12/18-19mm board with nails and adhesive complete all as specified and directed.

S&F second class HW plain fillets, square / rectangular, wrought face of sectional area n.exc 3 sqcm, securing with screw complete all as specified and directed.

S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed.

S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 450 mm x 500 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty all as per sample approved complete all as specified and directed.

S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 450 mm x 500 mm x 150 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty all as per sample approved complete all as specified and directed.

S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 450 mm x 500 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty all as per sample approved complete all as specified and directed.

S&F stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed. Make: Silver Shine model No KPR-314 or equivalent of make specified in Appx 'B'

S&F corner, two door, with shelves, made of ABS with glossy finish of size 280 wide x 360 mm deep x 590 Height for bathrooms fixed with screws as per manufacturer instruction all as specified and directed . Make: Prayag / Commander / Nilkamal

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed.

S&F Sheet glass ordinary quality in squares n.exc 0.50 sqm each pane 4 mm thick,glazing with oil putty or glazing clips all as directed.

Supply and fixed sheet glass, ordinary quality, in squares/rectangular shape n exc 0.5 Sqm each pane of 4.8mm thick

Supply and fixed sheet glass, ordinary quality, in squares/rectangular shape but exc 0.5 Sqm each pane of 4.8mm thick

M&L for green marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for granite stone slab 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situation complete all as specified and directed.

S&F 20 to 25 mm thick machine cut, both side polished kota stone slab fixed as in selves or partition under kitchen platform, fixed with cement mortar (1:6) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description by cutting or without damage of structure not otherwise provided for all as per directed.

M&L Framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-O or Fe-310-O

S&F in repairs door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg and fixed all as specified and directed.

S&F in repairs peg set of 5, stainless steel, minimum length 450mm all as specified and directed.

Demolition of stone slab & tiles laid, bedded and pointed in any mortar of any description of thickness in floors, aprons cills or platform etc all as specified and directed.

S&F in repairs aluminium door seal of length not less than 1200mm all as specified and directed.

Suraj Builders

SohanandCompany

rahil enterprise

Nirmal Construction

MAHENDRA ENTERPRISE

aarti construction

suvidhiconstruction