Laying of Paver block in the premises

Civil work

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m inwidth as well as 10 sqm on plan including getting out and disposal of excavated earth upto50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2.1.1 All kinds of soi

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer throughvibratory compaction by using plate vibrator, filling the joints with sand and cutting ofpaver blocks as per required size and pattern, finishing and sweeping extra sand. completeall as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stoneaggregate 20 mm nominal size derived from natural sources

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing comple

Earth work in excavation foundation all kinds of soil

Flat brick soiling

Brick work with fly ash brick FPS non modular bricks of class designation 7.5 in foundation and plinth

12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.11.3.1 40 mm thick with 20 mm nominal size stone aggregate