Loading
Loading…
Loading…
Tender Value
₹37.4 L
EMD Value
₹74,740
Closing Date
1 Oct 2026, 6:00 pm
GE BARRACKPORE
Office of the GE BARRACKPORE, KOLKATA - 700120
SPECIAL REPAIRS TO STP OF 350 KLD CAPACITY INCLUDING PUMPS, BLOWERS AND ASSOCIATED MECHANICAL AND ELECTRICAL EQPTS AT KANCHRAPARA MIL STN UNDER GE BARRACKPORE
2026_MES_759734_2
8232/E8
Open Tender
Civil Works
Item Rate
180 days
BARRACKPORE
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹500
GE BARRACKPORE
₹74,740
Yes
17 Sept 2026
17 Sept 2026
3 Oct 2026
17 Sept 2026
1 Oct 2026
26 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for troubleshooting of blower panel, checking contactor/OLR, repairing, tightening, insulation check and refixing including trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 1 | Each Job | - | - |
| 2 | Material and labour for panel spares as MCCB (Incomer Equivalent): 125A, 3-Pole, 25kA breaking capacity (1 No), Contactors (Power): 3-Pole AC3 Duty - 18A (2 Nos), 32A (1 No) for Blowers/Pumps, Overload Relays (OLR): Thermal bimetallic, ranges: 2.5-4A (2 Nos), 9-14A (2 Nos), 13-21A (1No), MCBs: 10A Single Pole for Control Circuit (4 Nos). Indicating Lamps & Lugs: 22.5mm LED Type (240V AC) R-Y-B and ON/OFF/TRIP (1 Set), Assorted Cu/Al Lugs, and fixing incl trial run for the dry/simulation testing of the panel's control logic (timers, level switch interlocks) after spare replacement to verify operation prior to running motors suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge | 1 | Each Job | - | - |
| 3 | M&L for dis assembling, repairing, mechanical servicing (bearing check, cleaning, coupling alignment) and refixing of blower 1 overhauling of piston cylinder system, change of shaft, piston ring, bearing, base frame suction discharge, valve, safety cage etc suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 1 | Each | - | - |
| 4 | M&L for dis assembling, repairing, mechanical servicing trip root cause rectification (overload, bearing load, etc.) and refixing of blower 2, overhauling of piston cylinder system, change of shaft, piston ring, bearing, base frame suction discharge, valve, safety cage etc suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 1 | Each | - | - |
| 5 | M&L for dis assembling, transportation, repairing and refixing, servicing of receiving/transfer pump with motor 3Ph automatic type with motor winding, change of shaft, bearing, flap, base frame suction discharge, valve etc including alignment & trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 2 | Each | - | - |
| 6 | M&L for dis assembling, repairing Filter feed pump servicing (3 HP) including trip check and refixing & trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 2 | Each | - | - |
| 7 | M&L for dis assembling, repairing Treated water pump (2 HP), servicing and refixing & trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 2 | Each | - | - |
| 8 | M&L for dis assembling, repairing Transfer pump servicing including gland/seal check, refixing & trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 2 | Each | - | - |
| 9 | M&L for dis assembling, repairing Distribution pump, servicing (if applicable as per P&ID) refixing & trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge. | 2 | Each | - | - |
| 10 | Material and labour for replacement of transfer line fittings/NRV/union/couplings as Pipe Specs: 80 mm NB, MS ERW Pipe, Heavy Class (C-Class), IS:1239, Length: 20 Running Meters (RMT), Fittings: MS Slip-on Flanges 80mm (12 Nos), 90° Elbows (8 Nos), CI Dual Plate Check Valve (NRV) 80mm (2 Nos), CI Butterfly Valves 80mm (2 Nos) with refixing & trial run suitable for STP of capacity 350KLD complete all as specified and as directed by the Engineer-In-Charge | 1 | Each Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
BOQ_885502.xls
BOQ • 0.34 MB
Tenderdoc_8232.pdf
Tender Documents • 1.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .