Construction of conference Hall and Furnishing of ADH office at Khariar in Nuapada District

Excavation of foundation in Hard soil within 50m initial lead and 1.5m initial lift

Filling Foundation and plinth with well graded sand including watering and ramming

Cement Concrete(1:4:8) with 40 mm size Hard Granite Metal

Cement concrete (1:2:4)with 12mm size hard broken granite chips per 1cum

Brick work with Fly Ash Brick in cement mortar (1:6) in foundation and plinth works

Brick Work with Fly Ash Bricks having crushing strength 75kg/sq.cm in cement mortar (1:6) in Super Structure (Ground Floor)

Brick Work with Fly Ash Bricks not less than crushing strength 75kg/sq.cm in cement mortar (1:6) in Super Structure(in first floor)

RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting in Ground Floor

(a) Plinth Band and Column Base

(b) Column and Beam

(c ) Lintel

(d) Chajja

(e ) Roof

(f) Stair

(g) Landing slab

RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting in First Floor

(a) Lintel

(b) Chajja

(c ) Roof

(d) Column and Beam

Straightening, Bending, Binding of M.S.Rod including cost of rod, Binding wire and transportation G.F

Straightening, Bending, Binding of M.S.Rod including cost of rod,Binding wire and transportation F.F.

Filling Foundation and plinth with Excavated Earth

12mm thick cement plaster in C.M(1:6) over brick work F & P

16mm thick cement plaster in C.M(1:6) over brick work G.F.

16mm thick cement plaster in C.M(1:6) over brick work F.F.

12 mm thick cement plastering C.M. (1: 6) G.F.

12 mm thick cement plastering C.M. (1: 6) F.F.

6mm thick cement plaster in C.M(1:4) R CC surfaces G.F.

6mm thick cement plaster in C.M(1:4) R CC surfaces F.F.

Priming 1 coat with any approved Primer G.F.

Priming 1 coat with any approved Primer F.F. (inside)

Priming 1 coat with any approved Primer F.F. (out side)

Finishing walls with Plastic Emulsion paint of approved shade on new work to give even shade 2 coats inside ,G.F.

Finishing walls with Plastic Emulsion paint of approved shade on new work to give even shade 2 coats inside , F.F.

wall putty (Water based ) of approved make and finished smooth and even surface to receive painting

Finishing walls with water proofing weather coat paint ground floor

Finishing walls with water proofing weather coat paint first floor

Fitting vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles , G.F.

Fitting vitrified tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles, G.F.

Fitting vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles , F.F.

Fitting vitrified tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles, F.F.

Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Fitting chequred tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles

Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4)

Providing and fixing Glazed Ceramic tiles in wall dados and skirting and in rises of steps on 12mm thick bed of cement plaster (1:3)

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia

Providing, fitting and fixing of false ceiling with 12 mm thick gypsum board

Supplying fitting and fixing of FRP door frame of size 75X100mm

Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick

Supplying of MS Doors of windows

Priming one coat with any approved red oxide over steel work.

Painting 2coats with any approved iron paint on new iron work.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size CB hard granite chips

Supplying all Materials, labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX)

Providingand fixing towall or ceilingand floor rigid UPVC pipes class IV (8kgf/cm²) /class III (6kgf/cm²) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with clamps including making good the wall,

Internal Electrification

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Group-A

Group-B

Group-C

Supplying and fixing of 5/6 amp one way modular type switch on existing switch box/cover including connections etc as required.

Supplying and fixing of 5 pin 5/6 amp socket outlet modular type on existing switch box/cover including connections etc as required.

Supplying and fixing of 15/16 amp one way modular type switch on existing switch box/cover including connections etc as required.

Supplying and fixing of 6 pin 15/16 amp one way modular socket outlet piano type on existing box/cover including connections etc as required.

Supplying and fixing batten holder/BK angle holder ISI marked including connection etc. as required.

Supplying and fixing of 25 mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required

Installation,Testing andCommissioning of pre-wired fluorescent fiiting /compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. (Flood Light, 50W rating)

Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto30cm) with1.5sq.mm FR PVC insulated single core multistrand copper conductoretc. including providing and fixing phenolic laminated sheet steet cover on the fan box etc as required.

Installation,Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5sq.mm FR PVC insulated single core multistrand copper conductor,earthing the regulator as required.

Extra for cutting and threading of G.I. pipe, heavy gauge down rod, for ceiling fan etc. as required.

Providing and fixing of following capacity TP& N disconnector fuse switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, making connection etc as required.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (4 WAY, SINGLE DOOR)

Supply and fixing of 5 amp to 32 amp rating 240 V "C" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (TRIPLE POLE AND NEUTRAL)

Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge. Make SEIMENS/ HPL/ ANCHOR/ L&T/ HAVELS/ C & S/ RK (32 Amp DP)

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc (but with out charcoal and salt ) as required

Extra for using salt and charcoal for G.I or copper pipe earth electrode as required

P.H. Works

Laying of 110mm nominal diameter UPVC sewer line including cost of materials.

Providing & Fixing to walls/floor the following nominal diameter pipe, fittings including cost of pipe, making good the damage, etc.

(a) 25mm dia PVC pipe in ground floor

(b) 20mm dia PVC pipe in ground floor

(c ) 15mm dia PVC pipe in ground floor

Cutting the G.I./Black iron pipes and inserting a fitting 15mm to 25mm

Cutting grooves in pucca floor and walls for taking G.I/PVC pipe and making good the damage in Ground Floor

Cutting holes through the brick or laterite masonary wall for taking G.I/PVC pipe and making good the damage in ground floor

Supply, fitting and fixing of CP concealed screw down stop cock of 15mm diameter in ground floor

Supply, fitting and fixing of brass or G.M.fullway valve of following nominal diameter etc. complete including cost of all materials. 25mm dia

Supply, fitting and fixing of C.P. screw down bib cock (tap) of 15mm diameter in ground floor

Supplying all Materials, labour, T&P fitting,fixing of Porcelain 22"x 16"(550x400) Wash basin with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complete as per specificationand direction of the Engineer-in-charge.

Flexible (coil shaped) PVC waste pipe for sink & wash basin 40mm dia with length not less than 700 mm long waste fittings

Supplying all Materials,labour,T&P and fitting, fixining of Wash down water Closet (Europian type W.C pan) with Integral"S" or "P" trap

Supply, fitting and fixing of Parryware make PVC low level 10l capacity cistern with complete fixtures, all complete in ground floor and first floor as per specification and direction of engineer in charge.

10 Liters P.V.C.low level Flushing Cystern

Please Enable Macros to View BoQ information