PROVN OF TOILET BLOCK AT BLDG NO P-06 NARENDER HALL OF KRC AT RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Surface excavation not exceeding 0.30m deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed by Engr-in charge .

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense soil complete all as specified and directed.

Returning, fillingin, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

M & L for spreading & levelling soil in layers n exc. 25 cm thick & well ramming incl. Watering in floors etc as required complete all as specified and directed.

Removing excavated material (soil) to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for RCC Design Mix M-25 type B-1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles complete all as specified and directed. (reinforcement to be measured separately).

M&L RCC Design Mix M-25 type B-1 (using 20mm graded crushed stone aggregate) in columns, pillars, posts & struts complete all as specified and directed. (reinforcement to be measured separately).

M&L RCC design Mix M-25 type B1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) complete all as specified and directed.

M & L for applying evenly a coat of blown type bitumen @1.50 kg / Sqm and blinding with clean dry sand @ 0.05 Cum/ Sqm complete all as specified and directed.

M & L for polythene film, 50 micron thick, laid over with and including on a coat of bitumen primer, @ 0.30 to 0.50 kg /Sqm complete all as specified and directed.

M&L RCC Design Mix M-25 type B1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of form work to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter, flat, rough finish surface of concrete complete all as specified and directed.

M & L for form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete all as specified and directed..

M & L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc., fair finished surfaces of concrete flat complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, as in reinforcement, cut to length, bent to shape, cranking, bending etc, including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F mild steel TMT bar 6 to 8 mm dia , as in reinforcement, cut to length, bent to shape, cranking, bending etc, including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 18 but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed..

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

M & L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L 25mm thick PCC, 1:2:4 type B-0 (using 12.5mm graded stone aggregate )as in floor finished rough to receive floor finishes complete all as specified & directed.

M & L for coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with and including 15mm thick screed in CM(1:4) complete all as specified and directed.

M & L for coloured glazed ceramic tiles in vertical surfaces 350x250mmx7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over with and including 10mm thick screed bed in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick masonry surfaces, finishing the surfaces fair and even complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) in ceiling finished fair and even complete all as specified and directed.

M&L Rendering 15 mm thick on concrete surfaces over roof in CM (1:4) mixed with water proofing compound as per manufacturer instruction or 3% by weight of cement (WPC paid & measured sepretelly) finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filling pressed steel frame complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in fixing of hold fast, bed blocks etc including necessary form work as required complete all as specified and directed.

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed.

M&L for precast cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match with and including necessary form work complete all as specified and directed.

M & L for hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels with and including necessary form work complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed..

M&L for applying two coats of oil bound Distemper over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed..

M & L for applying three coats of white wash on new plastered surfaces of ceiling including preparation of surface complete all as specified and directed.

S&F GI Tubes, `medium grade' with all GI fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and directed.

S&F GI Tubes, `medium grade' with all GI fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layered of any colour as directed, hoisted & fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F chromium plated bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F chromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag or equivalent approved make complete all as specified and directed.

S&F Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F Cast iron 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

M&L cast iron floor trap 75mm dia, with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F for Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S & F PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

S & F flush pipe of polyethylene for low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 580x450mm (for Hospital use) excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed.

S & F aluminium Hat pegs, solid body, 125 mm to 175 mm complete all as specified and directed.

S&F Aluminum anodized Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 15mm bore angle cock chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

M&L for 15mm thick cement mortar rendering in 1:3 with water proofing compound @ 3% by weight of cement over RCC roof and applying bitumen primer @ 0.30 kg/sqm and then apply hot blown bitumen grade 85/25 @ 1.2 kg/sqm and water proofing treatment by APP modified polymeric water proofing membrance (weight not less thant 3 kg /sqm) with overlap of 10 cm sealed by frame shall be laid & the overlaps sealed/fused by flame as per manufacture instructins. A coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane & finally it will be finished with a coat of aluminium paint @ 0.200Lit/sqm as per manufacturer's instructions complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation & mass concrete, bed of manhole etc. complete all as specified and directed.

M & L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan, exe 6.0 m mean radius built in cement mortar 1:4 as in wall of manholes, drain complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate) as in coping etc. including necessary form work complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:4, mixed with WPC @ 2% by weight of cement on fair faces of brick work (inside of manhole) including finishing the surface even & smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately)

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching of manhole, etc including necessary form work complete all as specified and directed.

M & L extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

M & L for SGSW pipe 150mm nominal bore grade 'A' laid in tranches and jointed in cement mortar 1:1 and tested complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed of drain pipes, laid to falls including packing under, haunching against the sides of pipes after they are laid, jointed and tested for 150mm bore pipe complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast cement concrete, manhole covers including all use of forms, moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:4, including necessary form work complete all as specified and directed. (Reinforcement shall be measured and paid separately under respective item of schedule "A")

Construction of brick masonry septic tank 25 users Capacity with excavation and earth work in hard/dense soil or in soft/disintegrated rocks, PCC 1:2:4 type B-2 as in foundation, brick work in CM 1:4, RCC M-25, CI manhole cover (HD), vent, shaft and sludge chamber etc. complete all as specified, and directed .

Construction of brick masonry soak well of 3.60 m internal dia and 3.0 m effective depth and excavation & earth work in hard/dense soil or soft/disintegrated rock, PCC 1:3:6 type C-2 as in foundation, honey comb and solid brick work in CM 1:4, RCC M-25 cover slab, PCC 1:2:4 in bands, filling with bricks bats complete all as specified, and directed .

M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4 (Using 12.50 mm graded stone aggregate) as in copings including necessary form work complete all as specified and directed.

E/M Portion Supply & Fixing point wiring for one light point/ fan point /bell point/ 5 Amp socket outlet point (independent) controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed:- One light/one fan/one bell point controlled by one, one way switch Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No.83 herein before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete all as specified and as directed.

All as per item No. 83 above but wiring with using cable 2.5 Sq mm copper wire (FRLS) and PVC insulated earth wire (Green Colour)2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amp on independent board complete all as specified and as directed.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing socket outlet 5 Amp, 2 and 3 pin (Total 5 pin) flush type 250 volts AC complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin each suitable for 5 and 15 Amp flush type 250 volts AC complete all as specified and directed.

S&F ceiling rose 3 phase, PVC/polycarbonate isolated body complete all as specified and directed..

Supply & Fixing lamp holder PVC/polycarbonate insulated body with back plate suitable for angle/batten fitting complete all as specified and directed.

Supply and fixing LED light fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light shall not less than 50,000 hours.complete all as specified and directed.

Supply and fixing high quality LED CRCA batten complete with retrofit T8 polycarbonate/ glass tube, suitable for mirror light internally pre wired of 1.5 Sqmm twin twisted flexible cable of make C & S of equivalent make of Philips/ Havells / equivalent approved make complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply & Fixing LED bulb 9 W complete all as specified and directed.

Supply & Fixing Exhaust Fan metallic body ISI mark 300 mm size with louvers including cutting openings, through brick/stone wall, making of holes and grouting of suitable sze of nuts and bolts for 300mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all specified and directed.

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk or flush to wall or niche complete all as specified and directed .

Material & Labour for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion, if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor.

Supply, laying, jointing and commissioning LT XLPE 1100 volts 16 sqmm 2 core grade heavy duty under ground cable PVC insulated stranded aluminium conductor served with inner sheating of PVC tape, armoured with GI steel or tape and over all PVC sheathing laid in trenches, floor through pipes, in duct on pole and roads etc. complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for brick protection cover laid over cables of sub class B bricks old size (230x115x75)mm complete all as specified and directed

M&L for GI pipe 40mm bore light grade with all GI fittings as in protection pipe for cable complete all as specified and directed

Supply & Fixing sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed .

S S CONSTRUCTION CO