SPECIAL REPAIR TO BLDG NO P-16 OTM ACCN AND JCOs MESS, CLUB BLDG NO P-40 UNDER GE MISAMARI

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames), complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and as directed.

S&F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified including power coating above aluminium section.(minimum thickness of poweder coating 50 micron), complete all as specified and directed.

S&F for anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron), complete all as specified and directed.

M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410.Gde-E-310 complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S&F aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple, complete all as specified and directed.

M&L for 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in aluminium frame work, complete all as specified and as directed.

M&L for Plain Cement Concrete (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in hold fast, complete all as specified and as directed.

S&F mild steel flat iron of any section, as in hold fast, wall tie, clamps, confirmig to Fe-290 Gde-E-165, complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21, complete all as specified and as directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed, complete all as specified and as directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section,complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed.

S&F in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and as directed.

S&F in repairs 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic, CP jet and pipe etc complete incl necssary PVC pipe fittings, including 'P' or 'S' strap, complete all as specified and as directed.

S&F in repairs for Vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, complete all as specified and as directed.

S&F in repairs Vitreous china urinals, bowl type flat back of size 465 x 355x 265 mm white minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and as directed.

S&F in repair PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles, glossy finished of size 450x350x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and directed.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter, etc, complete all as specified and directed.

M&L for granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over and including 20 mm thick screed bed in CM 1:6 CM as in floors, complete all as specified and directed.

Mirror polishing with by machine on existing old Kota stone surface as in floor and skirting to give gloss finish including jointed the torn out portion during polishing with grey cement slurry mixed with pigment to match the shade of the existing slab, complete all as specified and directed.

Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C2, (using 40 mm graded stone aggregate) as in plinth protection and finishing surface even and smooth with using extra cement, complete all as specified and as directed.

S&F in repairs 4mm dia plain mild steel wire, galvanised class 3 including staining and fixing and incl necessary hooks for securing in wall/ceiling, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete all as specified and directed.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender, complete all as specified and as directed.

M&L for 4m thick Non Asbestos designed fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium framework with screw in ceiling flat or sloping, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish, complete all as specified and as directed.

M&L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with sub-class ‘B’ Bricks Straight or Curved on Plan to any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed.

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item.

M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and as directed.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling finished even and smooth (without using extra cement), complete all as specified and as directed.

Supply only Integral water proofing compound

Dismantling plain or corrugated asbestos sheeting any thickness in roof covering, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F of pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.

Removing complete existing treatment incl PCC pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and as directed.

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm, complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item.

M&L 25 mm thick cement concrete (1:2:4 ) Type B0 (using 12.5 mm graded stone aggregate) as in roof, complete all as specified and as directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm, complete all as specified and directed.

Taking down rain water pipes inculding all fittings any size and pattern, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Vent Cowl, complete all as specified and directed.

S&F 50 mm bore sand cast cast iron soil waste pipes in any length with or without ears with cement joints laid in trenches or in floors, complete all as specified and as directed.

S&F 50 mm bore cast iron soil waste bends any radious with ducks foot or heel rest, complete all as specified and as directed.

M&L 50 mm bore for cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified and as directed.

S&F for 32 mm dia, Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.

Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store, complete all as specified and directed.

Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.

Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.

Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.

S&F in repairs 15 mm bore angular stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed , complete all as specified and directed.

S&F in repairs 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete as directed and specified.

S&F 15 mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, wastes and waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for, complete all as specified and directed.

M&L for Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E-250) quality-B, complete all as specified and as directed.

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm width or girth and applying Two coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for preparing old painted Steel and Iron Surfaces of any description, over. 10 Cm width or girth and applying One coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply Two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not other wise described over 10cm width or girth and apply One coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including a coat of chalk whiting over 1 mm thick wall care putty incl preparatory to distempering, complete all as specified and directed.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including a coat of chalk whiting over 1 mm thick wall care putty incl preparatory to distempering, complete all as specified and directed.

M&L for preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash,complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 Ltrs but not exc 1000 Ltrs capacity, complete all as specified and directed.

S&F 500 Ltrs Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface,complete all as specified and as directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and as directed.

Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes, complete all as specified and as directed.

Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles,complete all as specified and as directed.

M&L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light point controlled by one, one way switch 5 Amps, complete all as specified and directed

All as per item No 100 above but, One ceiling fan / exhaust fan point controlled by one , one way switch and regulator, complete all as specified and directed

All as per item No 100 above but, One 3 point 5 Amps socket outlets point controlled by one switch on the same board, complete all as specified and directed

All as per item No 100 above but, One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and directed

All as per item No 100 above but, One call bell point controlled by one bell push, complete all as specified and directed

All as per item No 100 above but, for one light point controlled by one, two way switch 5 Amps, complete all as specified and directed

All as per item No 100 above but, with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board, complete all as specified and directed

S&F Switch piano flush type single pole one way 5 Amp, 230 Volts ,complete all as specified and as directed.

S&F switch piano single pole flush type, two way, 6 amps, 230 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, complete all as specified and directed.

S&F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts, complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal, complete all as specified and directed.

S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm, complete all as specified and directed.

S&F bell push,5 Amp, flush type, complete all as specified and directed.

S&F Buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and directed.

S&F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 Volt AC supply, complete all as specified and directed.

S&F Lamp holder with insulated body, with back plate suitable for batten fittings , complete all as specified and directed.

S&F Decorative wall light fixture made up of polycarbonate suitable for 10W LED Lamp complete all as specified and as directed. Make : Model No. Comet Wall Light 30575 of Philips or equivalent in Havells/Surya.

S&F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and directed. Make : Cat No. LHLDEUEBML8Z010 of Havells or equivalent in CG/Surya.

S&F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure,complete all as specified and directed. Make: Model No. DBTPE004SD of L&T or equivalent in Schinder/Legrand.

S&F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps, complete all as specified and directed. Make : Model No. BB40630C of L&T or equivalent in Schinder/ Legrand.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system, complete all as specified and directed. Make : Model No. DBSPN006D of L&T or equivalent in Legrand/Indo Asian.

S&F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Cat No. BB20320C of L&T or equivalent in Schinder/ Legrand/Indo Asian

S&F sheet metal enclosure MCB VTPN 8 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s earth bars sticking saddles cement spill protector color-coded interconnecting wire set cable ties blanking plates and circuit identification labels With provision for 4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. Make : Cat No. DBVTH008DD of L&T or equivalent in Legrand/ Indo Asian.

S&F MCCB 4 Pole 415 volts 125 Amps with thermal - magnetic release with breaking capacity 36 KA and with adjustable overload setting, omplete all as specified and directed. Make : Type- DN2-250D Model No. CM92108OOL1OG of L&T or equivalent in Legrand/Indo Asian.

S&F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Model No. BB10060C,BB10100C,BB10160C of L&T or equivalent in Schinder/ Legrand/ Indo asian

S&F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder, complete all as specified and directed. Make : Model No.REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model No. PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight of Havells or equivalent in CG/Surya.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape,complete all as specified and directed. Make : Model No. ENDURAPEARLSL15WLED757SASYTOPCMP of Havells or Equivalent in CG/Surya.

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth and getting out in soft /loose soil for lying of cable and errection pipe etc, complete all as specified and directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

M&L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation, complete all as specified and directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection, complete all as specified and directed.

Supply & Laying LT heavy duty UG Cable of size 25 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length, complete all as specified and directed.

S&F for single pole and neutral enclosure with a two pin and earth plug and socket complete with on one single pole MCB 20 Amp, 240 volts, complete all as specified and directed.

S&F GI Tubing, light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc, complete all as specified and directed.

Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, complete all as specified and as directed.

M&L for replacement Sub main wiring 2 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles, complete all as specified and directed.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 Mtr below the Road Surface with the help of GI Tubing not exc. 50mm bore (dia) for passing of UG Cable, complete all as specified and as directed. Note : GI Pipe laid will be measured and paid separately under relevant item.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC (1:3:6) type B2 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I, complete all as specified and directed.

M/S SUNNY ENTERPRISE

Saraswati Auto Works

Markson

M/S S.S.Corporation

MAA CONSTRUCTION

MS Awash Ghosh and Brothers