Construction of Health Sub Centre at Nalhota, Teh. Multhan Distt. Kangra (HP)

Excavation in earth work in all kinds of soils by mechanical means in foundation trenches or drains in all heights and depths including dressing of sides and ramming of bottoms, lift up to all heights, getting out the excavated soil and disposal of surplus excavated soil as directed, including carriage of all labour, equipment and materials to various locations through all modes of transportation, including all incidental charges."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and laying cement concrete 1:5:10(one cement: five sand:ten graded crushed / broken stone aggregate 40 mm (forty milimeters) nominal size ) and curing complete including the cost of form work in Retaining walls Breast walls, in or under water complete including, pumping or bailing out water ,dewatering removal of slush as required at site which may arisen at the time of laying under water complete for all heights/depths including cost of form work as per drawings and MORD technical specifications section 800, 900,1200 & 1600 and as per the direction of Engineer-in-Charge . including carriage of material within all leads and lifts and other incidentals ."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing 0.60 mm (Zero point sixty millimeter) thick pre-painted steel sheet of TATA/DURROSHINE in roofing with hot dipped galvanized zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 microns over 5 microns primer coating of polyester on back coat of 5 microns over 5 microns primer coating, including fixing with pre-painted iron or J/L hooks, bolts and nuts, 6 mm diameter with prepainted limpet and rubber washers complete with all accessories as required."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing ridges or hips 90 cm (Ninety centimeters) overall with 0.60 mm (Zero point sixty millimeter) thick prepainted steel sheets (TATA/DURROSHINE) in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating and back coat of polyester of 5 microns over 5 microns primer coating, including fixing with prepainted J hooks bolts and nuts, 6 mm diameter and prepainted G.I. limpet and bitumen washer complete with all accessories as required."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain C.G.S. sheet gutter with non-brackets 40 x 3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick within coating not less than 275 gsm/m²."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring, 110 mm nominal diameter, single socketed pipes 75 mm."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and fixing M.S.B.P. sheet 1.66 mm to 2 mm (One point six six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and in roof ceiling protection."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Structural steel work riveted, bolted or welded in built-up sections, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, providing 20 mm dia holding down bolts."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Backfilling behind abutment, wing wall and return wall complete as per drawing and technical specification clause 1204.3.8 in granular material and as per direction of the Engineer-in-Charge, including carriage of all labour, equipment and materials to various locations through all modes of transportation."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."