Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC 001 00 BANK COLONY SHIVPURI SHIVPURI MADHYA PRADESH 473551 | SHIVPURI | MADHYA PRADESH | 473551 | L1 | Accepted-AOC Being reasonable | |
| 2 | L2₹12.1 L+₹66,956.40 (5.84%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹12.5 L+₹1.1 L (9.25%)Rejected-Finance 3 A KUSUMANJALI PRIYADARSHINI NAGAR BAREILLY UP 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹13.1 L+₹1.7 L (14.6%)Rejected-Finance H NO 786 ANAND VIHAR COLONY PILIBHIT BYPASS BAREILLY UP PIN 243005 | BAREILLY | UTTAR PRADESH | 243005 | L4 | Rejected-Finance Not being L1 |
Tender Value
₹15.7 L
EMD Value
₹31,400
Closing Date
5 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Shilpam Bharali
Garrison Engineer (AF) Military Engineer Services, Bareilly 243002 (UP)
8764 ADDN, ALTN TO AIRMEN MESS AT AF STATION BAREILLY
2023_MES_627680_1
8764/E8
Open Tender
Civil Works
Item Rate
120 days
Bareilly
Class E
Category a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (AF) Bareilly
₹31,400
Yes
8 Jan 2024
9 Nov 2023
7 Dec 2023
9 Nov 2023
5 Dec 2023
23 Nov 2023
Amount
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.
Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster
M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete including mixing liquid water proofing compound, work at heights up to 12m from GL including all necessary scaffolding arrangement complete all as specified and as directed. [Note: Supply only water proofing compound shall be measured and paid separately]
M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:3 on surfaces of ceiling finished even and smooth without using extra cement complete including brushing neat cement slurry with 3 kg of cement per sq.m. preparatory to rendering complete all as specified and as directed.
Supply only liquid water proofing compound. [Make: Conplast X421 IC of make: M/s Fosroc Chemicals India (P) Ltd. or equivalent in M/s Pidilite Industries Ltd./ M/s Sika India Pvt. Ltd./ M/s Structural Water Proofing Co. Pvt. Ltd./ M/s BASF India Ltd.]
Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.
Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.
Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.
M&L for Reinforced cement concrete type B1 1:2:4 (nominal mix) using 20mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified.
M&L for Reinforced cement concrete type B1 1:2:4 (nominal mix) using 20mm graded aggregate in Columns, pillars, piers, posts and struts all as specified.
M&L for Reinforced cement concrete type B1 1:2:4 (nominal mix) using 20mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span concrete all as specified.
M&L for Reinforced cement concrete type B1 1:2:4 (nominal mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete all as specified.
Use and removal of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete all as specified
Use and removal of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface of concrete all as specified
Use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for fair finished surface of concrete all as specified
Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete all as specified
S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
S&F high strength deformed TMT steel bars 5mm to 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
M&L for hardcore with broken stone or boulders of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface.
M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.
M&L for PCC 40mm thick type B1 (1:2:4) using 20mm graded aggregate as in hard standing/ flooring complete finishing even and smooth without using extra cement all as specified.
M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.
Taking up or down galvanized steel tubing 15mm bore with fittings.
Taking up or down galvanized steel tubing 20mm bore with fittings.
S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old GI tubing 20mm bore dia and connecting in new or old location including cleaning etc. complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.
M&L for 75mm thick cement concrete type C1, 1:3:6 (using 20mm graded stone aggregate) in plinth protection, laid in bay n.exc. 3.00 sq.m each, finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight) complete all as specified and directed.
Disconnecting and dismantling existing PVC water tank of capacity n.exc. 500 Ltr complete all as directed.
S&F rotational moulded polyethylene water storage tanks, triple layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples all as specified and as directed by Engineer-in-charge.
S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, long body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.
S&F Cast iron soil, waste and vent pipes 100mm bore, sand cast in any length with or without ears, with cement joints, fixed to walls all as specified.
S&F Cast iron bend 100mm bore dia with oval access doors of any radius fixed to CI soil and vent pipe and jointing with cement mortar complete all as specified.
S&F stainless steel (AISI 304 grade) grating 125mm dia with or without waste hole, all as specified.
S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.
M&L for applying 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed
M&L for preparation of new plastered surfaces of walls & applying two coats of cement based paint all as specified and as directed.
M&L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed.
M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed
Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.
S&F second class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed
M&L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.24 (a) complete all as directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 all as specified and as directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Butt hinges and necessary screws shall be paid separately)
M&L for mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.
M&L for treating small article such as hold fast etc area n.exc 0.1 sq.m each with tar or coal tar black paint complete all as specified and as directed.
S&F 300mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F 100mm long cold rolled MS butt hinges medium weight.
S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.
S&F 150mm extruded aluminium alloy tower bolts extruded sections anodized complete all as specified and as directed.
S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete
M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete work at height up to 10mtrs all as specified and as directed.
M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
S&F Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm all as specified and as directed
M&L for non skid coloured ceramic joint free tiles of size 400x400mm, 7 to 8mm thick in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:4) complete all as specified.
M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.
M&L for machine cut Kota stone slab flooring 20-25mm thick laid over and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for 18-20mm thick Udaipur green stone work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm thick screed bed in CM 1:4 complete all as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridge piece all as directed..
M&L for steel work in tubular trusses, posts etc. (any size/ shape and fixing at any height) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240 all as specified and as directed.
M&L for rolled mild steel work as in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe.410-W. (Gde-E-250, Quality-A) complete all as specified.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling timber fillets, rails, posts, rafters, purlins, etc. 40 sq.cm and over in section, in any position, unframed work complete all as specified
M&L for 2nd class hardwood in scantlings, clean sawn, timber framed and fixed as in roof truss including fixed in position complete all as specified and as directed.
M&L for 2nd class hardwood in scantlings, clean sawn, timber fixed (un framed work) as in purlins, rafters etc including fixed in position complete all as specified and as directed.
M&L for providing and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225: 1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (Part-4), fire performance as per BS:476 (Part 6&7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518 : 1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sq.m including both sides) comprising of main T runners of size 24x32mm of length 1200mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sq.m) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm c/c and 40mm long dry wall/ partition with the help of plastic rawl plugs at 450 mm c/c and 40mm long dry wall S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.
Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete with all fittings and fixtures such as switch piano, ceiling rose, switch socket, pendants etc including making good surface of wall, ceiling etc complete all as specified.
Disconnecting and taking out MCB DBs of any capacity including MCBs complete all as specified.
Taking down carefully existing sub-main wiring of any description complete all as specified.
M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
All as per Item No. 81 herein before but for one 3 pin 6 Amp socket out let point on independent board.
All as per Item No. 81 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.
All as per item No. 81 herein before but point wiring with 2.5 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade duly earthed with same cable as for wiring above and green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.
S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Philips Cat Part No : BN100C LED20S-6500 PSU L120 GR S4/ Havells Cat Part No : STOUT PLUS 600BS 20W LED 857SPCWH/ Wipro Cat Part No : Wipro Garnet 20W LED Batten (White) D532065
S&F recess mounted direct lighting LED Luminaire 34-36W of size 2'x2', with powder coated CRCA housing, seamless front frame, flat white high transmission acrylic cover fixed to Modular/ Gypsum/ POP ceiling complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting all as directed. [Cat No. PLUTONEO2X2PLR34WLED857S of make: Havells or Cat No. RC380B LED36S-6500 G5 L60W60 PSU OD of make: Philips or Cat No. LCTLRNE-36-FO-CDL of make: CG/ Cat No. CRCO10S038HP57GL of make Wipro with frame of Cat No. 9180P01089 LP]
S&F Exhaust fan 450mm sweep, single phase 230V AC, 900 RPM metal body with louvers including electric connection from ceiling rose to fan connector with PVC insulated 2 core copper cable of size 0.75 sq.mm complete including taking down existing unserviceable fan and handing over to MES stores complete all as directed.
S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.
Supply, fixing, installation and testing of storage type water heater (Geyser) 25 Ltrs capacity, BEE 5 star rated with steel inner tank and polycarbonate outer body including pressure valve & electric supply connection complete including grouting with nuts & bolts of 15mm dia 100 mm long for hanging the geysers, including PVC connection 15mm dia, 450mm long heavy duty suitable for hot & cold water connections complete including plastering and finishing of disturbed wall surface as per existing finish complete including taking down old U/S Geyser complete all as specified and directed. Note :- Unserviceable Geyser shall be deposited in MES Store yard. Make: AO Smith Model No AO Smith ELJ Series Storage Water Heater ELIV 25 Litre Vertical Type, Havells Model No Monza dx Vertical Type, Racold Model No Racold Platinum Plus Vertical Type.
S&F single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.
M&L for sub main wiring concealed complete with two runs of single core 6 sq.mm (nominal area) 1100 volt grade single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. including provision of earth continuity wire with same cable as for wiring but in green colour all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.
S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.
S&F switch piano, flush type 5/6 Amps, one way, 230V AC
S&F switch piano, flush type 15/16 Amps, one way, 230V AC
S&F socket outlet 2 in 1, 6 Amp, 5 pin, 230V AC
S&F socket outlet 2 in 1, 5/6 & 15/16 Amp, 6 pin 230V AC
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.
Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 17,725.00
Alishba Enterprises
VINOD TRADING CORPORATION
ZAIGHAM ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .