Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 CrAdmitted-Finance | ₹2.7 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.0 Cr+₹28.3 L (10.5%)Admitted-Finance PADAM PUR COLONY LINK ROAD PITHORAGARH UTTARAKHAND | ₹3.0 Cr+₹28.3 L (10.5%) | L2 | Admitted-Finance |
| 3 | L3₹3.0 Cr+₹34.3 L (12.7%)Admitted-Finance | ₹3.0 Cr+₹34.3 L (12.7%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | Rejected-Technical bidder disqualify |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | K M Engineering and Construction L2 | Yogesh Singh Mehta L1 | Manoj Kumar Pathak L3 |
|---|---|---|---|---|---|---|
| 1.00 | Road Delineators / Vertical Guide Posts:
Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of thedelineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79. | 334 | No. | 1,150 ₹3,84,100 | 1,032 ₹3,44,688 Lowest | 1,172 ₹3,91,448 |
| 2.00 | Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 | 7,326 | No. | 3,920 ₹2,87,17,920 | 3,550 ₹2,60,07,300 Lowest | 4,001 ₹2,93,11,326 |
| 3.00Retro-Reflective Traffic Signs with Type IV retro- reflective Sheet Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 3mm/4mm thick Aluminium composite material sheet vide clause 801.3, depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel a mild steel circular pipe 65 NB, 3.2 mm thickness, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. | ||||||
| 3.10 | 600 mm equilateral triangle | 90 | No. | 3,920 ₹3,52,800 | 3,433 ₹3,08,970 Lowest | 3,900 ₹3,51,000 |
| 3.20 | 600 mm Circular | 72 | No. | 4,500 ₹3,24,000 | 4,034 ₹2,90,448 Lowest | 4,583 ₹3,29,976 |
Tender Value
₹3.0 Cr
EMD Value
₹7.2 L
Closing Date
12 Feb 2025, 5:00 pmClosed
Superintending Engineer
Superintending Engineer 1st Circle PWD Almora
Safety work of accident prone spots under Road Safety from km. 1.00 to 9.00 in Amsarkot Satartave Motar Road ODR in bageshwar District
2025_pwd_79325_1
5937/Nivida-01/2024-25 dated 30/12/2024
Open Tender
Civil Works
Item Rate
182 days
Bageshwar
As per technical bid
2 documents required · 2 mandatory
₹5,900
EE PD PWD Bageshwar
₹7.2 L
Almora
27 Mar 2025
5 Jan 2025
13 Feb 2025
5 Jan 2025
12 Feb 2025
24 Jan 2025
23 Jan 2025
Amount
Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of thedelineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79.
Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810
Retro-Reflective Traffic Signs with Type IV retro- reflective Sheet Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 3mm/4mm thick Aluminium composite material sheet vide clause 801.3, depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel a mild steel circular pipe 65 NB, 3.2 mm thickness, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.
600 mm equilateral triangle
600 mm Circular
K M Engineering and Construction (BID ID -359369)
Manoj Kumar Pathak (BID ID -359158)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.86 MB
Amsarkotsatrtve10Km1to9.pdf
Tender Documents • 11.29 MB
BOQ_94636.xls
BOQ • 2.05 MB
Tenderdocument.pdf
Tender Documents • 11.29 MB
BOQ.xls
BOQ • 2.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .