DAY TO DAY MAINTENANCE OF B/R ITEMS AND PETTY REPAIRS INCLUDING ROOFING, SANITARY FITTINGS RWP AND PVC TANK OF SECT V TO XI OF AGE CHARDUAR UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Taking up or down steel tubing and connections, 15mm bore and removal of unserviceable pipe from site of work complete all directed.

Supply and fix 15mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore and removal of unserviceable pipe from site of work complete all directed.

Supply and fix 20mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed.

Supply and fixed in repair 15mm bore chromium plated bib taps, cast copper alloy, screwed down, with crutch or butterfly handle, screwed for steel pipe or brass ferrule complete all as specified and directed.

Supply and fixed in repair 15mm bore chromium plated stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe for unions complete all as specified and directed.

S&F in repair vitreous China Urinal, bowl type (back or corner wall type) size of 465x355x265mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinalto plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white / black, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous chaina wash hand basin 550X 400mm (flat ball type) any size including cutting for and pinning in ends of brackets and fixing of supply and waste water pipe complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and as directed.

Supply and fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphone action type, flushing cistern low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed.

S & F for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed.

S&F 15 mm size PVC connection pipe with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repair Soap dish, Vitreous China white, approximate size 160x160x90mm

S&F in repair chromium plated towel rail 600mm long complete all as specified and directed.

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Dismantling existing water tanks capacity exc 250 Ltrs but n.exc 500 Ltrs, removing from site complete all as specified and directed.

S&F in repair 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete all as specified and as directed.

S&F in repair ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed 20 mm bore dia of pipe complete all as specified and as directed.

Dismantling existing water tanks capacity exc. 500 Ltrs but n.exc 1000 Ltrs, removing from site complete all as specified and directed.

S&F for 1000 Ltr capacity rotational moulded polythelene, three layer, PVC water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc. 250 ltrs and not exc. 500 ltrs cleaning with wire brush complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc. 500 ltrs and not exc. 1000 ltrs cleaning with wire brush complete all as specified and directed.

S & F liquid soap container of PTMT Fixed with including chromium plated brass screws and wooden/plastuc ckeats (Minimum weight 105 gms) all as specified and directed.

S & F Shelf for PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) all as specified and directed.

S&F in repair 40mm bore waste coupling of PTMT (half or full thread) for sink complete all as specified and directed.

S & F in repairs of 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

S&F in repairs brass chromium plated Wall mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality without telephonic shower.

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed .

S&F for aluminium tubular towel rail of superior quality 'D' type 20mm dia 60cm long between flanges as in repair complete all as specified and directed.

S&F Bottle trap of PTMT having minimum wate seal of 25mm. (Minimum weight 32mm -260gms/40mm-270gms) all as specfied and directed.

S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) all as specified and directed

M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) multi Floor trap of 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed.

S&F UPVC soil or waste pipe 110 mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and directed.

All as per serial item Ser No 43 above but 75 mm bore completeall as directed.

S&F UPVC (SWR) bend in any radius 110 mm dia. complete all as specified and directed.

All as per serial item Ser No 45 above but 75 mm dia completeall as directed.

S&F UPVC pipes 50 mm bore fixed to walls, floors,ceiling etc. complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

Brushing neat cement slurry with 3.0kg of cement per sq. metre

M&L for non skid ceramic colour tiles, 7 to 8 mm thick, area of each tiles exc 0.06sqm but not exc 0.11 sqm squre / rectangular in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick squre / rectangular area of each tiles not excedding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.

M & L for 300 x 200 x 7mm thick coloured glazed ceramic tiles as in vertical surfaces such as dados / skirting etc. set and jointed in neat cement slurry and pointed in white cement over 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, in ceiling,and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick on fair face of brick wall or concrete surface in cement mortar1:4 mixed with WPC @ 3% (or as per manufaturers instruction) finished even and smooth without using extra cement, complete all as specified and as direted. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or CM(one side only measured in cases where both sides are plastered)

Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste

M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6)

M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6)

M & L for applying three coats of white washing to new plastered wall surfaces inluding preparation of surfaces complete all as specified

M & L for applying two coats of white washing to new plastered ceiling surfaces inluding preparation of surfaces complete all as specified

Dismantling of wall and ceiling boards (Fibre/Pulp/Plywood) any thickness including cover fillets

S & F anodised GI snap grid (Size of grid 605mmx605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing all as specified

S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws.

M&L 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws

M&L for 6 mm thick Cover fillets of standard hard board, 40mm wide, and fixing with screws

S&F 12 mm thick Particle board for insulation purposes, fixed with nails to timber framework

Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area n exc 1.50 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area exc 1.50 Sqm but not exc. 4 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description area n.exc 1 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description area exc 1 sqm and n exc 2 sqm each and removing from site complete all as specified and directed.

Taking down door shutters of any description area n exc 1 sqm each rescuring or easing & adjusting of shutter and refixing in same opening complete all as specified and directed.

Taking down door shutters of any description area n. exc 1 sqm each rescuring or easing & adjusting of shutter and refixing in other opening complete all as specified and directed.

Taking down door shutters of any description area exc 1 sqm but n.exc 2 Sqm each rescuring or easing & adjusting of shutter and refixing in same opening complete all as specified and directed.

Taking down door shutters of any description area exc 1 sqm but n.exc 2 Sqm each rescuring or easing & adjusting of shutter and refixing in other opening complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick 2nd class hardwood glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed.

S & F for 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divided into squares (with sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed.

S&F Anodised aluminium frame powder coating ( Minimum thickness of powder coating 50 micron) for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S&F powder coating ( Minimum thickness of powder coating 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

S&F aluminium (Extruded section body) door closer hydraulically regulated, designation No.3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane glazed with putty or wooden beads complete all as specified and directed.

S&F 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and as directed.

S&F Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed, complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed, including taking down old wiremesh complete all as specified and directed.

Preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed..

M&L 19/20 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws, complete all as specified and directed.

S & F for 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed.

S&F of framed work as in guard bars ,grills ,gratings and similar work confirming to FE 290,Gde-E-165 Etc.

M&L framed work as in doors or gates of angle or other section with gusset plate plates rails braces etc complete drilling for fixing of steel sheeting or other covering materials or welding complete all as specified and directed including fixing, complete all as specified and directed.

S&F steel window with side hung shutter ( glazed) incl box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer complete all as specified and directed.

S & F for steel window with side hung shutter (mosquito proof) with box type hing, peg stay, lugs, handles, without glazing bars complete incl one soap coat of red oxide primer complete all as specifed and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 100mm size complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 75mm size complete all as specified and directed.

S&F 150 mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed.

S&F 100mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S& F in repairs Mild steel, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

S & F in repairs,Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc MS curtain rods 22 - 25 mm dia curtain rod all as specified and directed.

S & F brass knobs for curtain rod all as specified and directed.

S&F in repairs Brass chromium plated brackets

S&F Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.

S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Supply & fixed in repair 100mm size mild steel butt hinges "medium weight" cold rolled complete all as directed.

Supply & fixed in repair 75mm size mild steel butt hinges "medium weight" cold rolled complete all as directed.

Supply & fixed in repair 200 mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as directed.

Supply & fixed in repair 100 mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as directed.

Supply & fixed in repair 150 mm long mild steel pressed handles ovel type stove enamelled black complete all as directed.

Supply & fixed in repair 100 mm long mild steel pressed handles ovel type stove enamlled black complete all as directed.

Supply & fixed in repair mild steel 300 mm long sliding door bolt, plate type stove enemelled black, with bright bolt not less than 12 mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

All as per serial item above but not exc 10 cm width or girth complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described for and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per serial item above but not exc 10 cm width or girth complete all as specified and directed.

M&L for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described nexc 10cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Dismantling of old decayed timber scantling 40 Sqcm and over in section in any position in unframed work and removing materials from site of work complete all as directed

Dismantling of old damaged timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in unframed work of any description and removing unserviceable materials from site of work complete all as specified and directed.

M & L for second class hard wood in scantling clean Sawn and fixed complete all as specified and as directed.

S & F second class hard wood plain fillets square,rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq.cm but not exceeding 13 Sq.cm complete all as specified and as directed.

S & F second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with nails, cross sectional area exceeding 13Sq.cm but not exceeding 25 Sq.cm complete all as specified and as directed.

Dismantling plain or corrugated AC sheeting , any, thickness or similar pattern roof coverings.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls ,sunshed etc fixed with L-Type or J-Type or cranked hook bolts..

S&F for 0.63mm thickness of Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc with grade of zinc coating 275 all as specified and directed.

S&F for 0.63mm thickness Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Except sheeting (any thickness) old dismantling galvanised, corrugated MS sheeting with two corrugations side lap, fixed with L or J type or cranked hook bolt

Pre-painted galvatume aluminium zinc coating GI based corrugater steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., complete all as specified and as directed.

Demolition of brickwork any description and position built in cement mortar

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness but below or above ground floors (unreinforced)

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate

Material and labour for providing 100mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate as in pavings/path surfaces fair and even and spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green surface complete all as specfied and directed

Material and labour for providing 75mm thick cement concrete (1:3:6) type B1using 20mm graded aggregate as in plinth protection surfaces even and smooth without using extra cement all as specified and directed.

Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded exc 20mm but n exc 25mm,including refixing the same complete all as specified and as directed

Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required

S&F18-20mm thick granite of any type work table rubbed and polished in steps, jambs,pillars,cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of cement mortar (1:6) after taking down old slab complete all as directed.

Providing & injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall & rodding etc. complete

DRISTEE ASSOCIATES

M/S Barua Enterprise