Lighting arrangement works in Govt College Kota

Supply , Installation testing and Commissioning of IP 65 Micro led and Mini led fitting suitable for downlight, wall recessed and walkover for both indoor and outdoor appolication. Small dimension with flush mounting installation. It is equipped with a screwless round front ring in Stainless steel with transparent or opal diffuser . These fixtures are perfect for creating very defined effects of accent light. Luminarie body and screwless front ring made from solid billet of stainless steel . Having up to 3W complete in all respect. Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : Abbey/K-lite/ Osram/Philips/Lusture/ Bajaj / Home Deck &equivalent make and make is to be approved by department ) LED Down Light 3 W

SITC of IP65 Landscape luminarie designed to provide directional spot light .The luminaries with connecting cable and earth spike for portable installation/ bracket for permanent installation on a wall , under a ceiling or on a piller . Integrated with 6W LED, Clear Glass, IP65. made of aluminum alloy with non corrosive SS fasteners , lens protected by tempered Glass Visior, CRI-80 , Luminaire prewired with LED driver and Suitable for operation on 240V, 50Hz single phase ac supply, CE - Conformity mark.Complete in all respect.Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/ Osram/Philips/Lusture/ Bajaj and & make is to be approved by department .) Spot light 6W LED

Supply , Installation testing and Commissioning of IP65 flexible Linear strip . Water & UV resistant flexible linear LED luminaire Having atleast 9W/mtr ,Complete in all respect with power supply, connectors as per architectural design requirement . .(Make : K-lite/ Osram/Philips/ Bajaj )

Supply installation and commissioning of 230-240Vac CRI>80 MacAdam step 3 Input power: 24W, length- 1 meter.Light Distribution : Forward Asymmetrical Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE: Wall Mounted luminaire. IP rating IP65.MATERIAL CHARACTERISTICS: Die-Cast aluminium alloy housing (grade ADC12 with test certificate). Die-Cast aluminium asymmetrical front frame (grade ADC12 with test certificate). Silicone clear gasket. SS fasteners. Mechanical resistance IK09. Pure polyester powder coated process : Acid treatment & pure polyester powder coating.INSTALLATION AND MAINTENANCE: ABS plastic installation housing for preparing the recess opening in wall for flush mounting. The luminaire are fixed in recess installation housing by stainless steel screws.LIGHTING PERFORMANCE: Clear acrylic diffuser of 1.5mm thickness with controlled downward light emission. Lamp fixed position. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.95, THD <10%, Surge protection 4KV ..Make : K-lite/ Osram/Philips/Bajaj and make is to be approved by department as per architectural design

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 3 core*1.5 SQMM

3 core*2.5 SQMM

SITC of Linear Wall Washer [Dimension : 500 x 35 x 78mm] integrated with 12W LED, Clear Glass IP65, Surface mounted linear light, made up of extruded aluminum for better thermal management, Clear lines, corrosion resistant. Tempered glass diffuser for excellent diffused lighting experience throughout the life of the fixture. Beam angle : 10º x 60º, Operating Temperature : -40°C~+55°C ? Mounting bracket with tilting feature to facilitate proper aiming of the luminaire at desired angle. Cable entries for through-wiring of mains supply cable, Protection class IP65 , CE - Conformity mark as per architectural design requirement complete in all respect . Length 500mm Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/ Osram/Philips/Lusture/ Bajaj ) Linear Wall Washer 12W

Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supply installation, testing and commissining of street light drivers constant current with input voltage of 230-240 v AC freq.- 50-60 hz, operating voltage- 100-277v AC operating temp.- -15 deg to + 50 deg, PF>0.95, THD:<10%, surge protection to be inbuilt- 6KV, efficiency>85% with driver wattage- 30W as required and make of driver should be as per the OEM of LED light installed at site

Providing experienced and Highly skilled/skilled/ semi-skilled/Un Skilled labour for electric repair/ maintenance / operation of Air conditioning/Air cooling/Fire fighting/Lift/DG set/CCTV/EPABX or any other electromechanical systems as per requirement (one shift of 8 Hrs per day for 26 Working Days in a month) skilled Labour. Note- For O&M of lighting system(2 LABOUR FOR 24 MONTH =48 NO)

Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . High Power LED Flood Light Minimum lumen output 18650 lm. Note- Colour of flood light to be as per site requirement

Supply & drawing Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4.0 sq.mm

Please Enable Macros to View BoQ information