Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹48.8 LAccepted-Finance | 1 | Accepted-Finance L1 Bidder | |
| 2 | 2₹49.0 L+₹21,430 (0.44%)Accepted-Finance | 2 | Accepted-Finance L2 Bidder | |
| 3 | 3₹50.7 L+₹1.9 L (3.97%)Accepted-Finance | 3 | Accepted-Finance L3 Bidder | |
| 4 | 4₹51.7 L+₹2.9 L (5.97%)Accepted-Finance | 4 | Accepted-Finance L4 Bidder | |
| 5 | 5₹53.5 L+₹4.8 L (9.75%)Accepted-Finance | 5 | Accepted-Finance L5 Bidder |
| Sl No | Description | Qty | Unit | VINAYAK FURNISHINGS L5 | JAYANTA SAIKIA L1 | ANURAG BAISHYA L4 | PANKAJ DAS L2 | DIPANKAR BAYAN L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
18 mm thick | 20 | sqm | 1,245 ₹24,900 | 1,425 ₹28,500 | 478 ₹9,560 Lowest | 1,435 ₹28,700 | 1,478.58 ₹29,571.6 |
| 2.00 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
25 mm thick | 20 | sqm | 1,715 ₹34,300 | 1,960 ₹39,200 | 1,495 ₹29,900 Lowest | 1,970 ₹39,400 | 2,035.77 ₹40,715.4 |
| 3.00 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Wedge expansion type
Fastener with threaded dia 10 mm | 150 | each | 40 ₹6,000 Lowest | 50 ₹7,500 | 745 ₹1,11,750 | 55 ₹8,250 | 47.48 ₹7,122 |
| 4.00 | Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 (1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).
Stainless steel cramps | 10 | kg | 714 ₹7,140 | 820 ₹8,200 | 675 ₹6,750 Lowest | 825 ₹8,250 | 847.92 ₹8,479.2 |
| 5.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make thickness of powder coating 50 micron) or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (A) For Fixed Portion (i) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 100 | kg | 530 ₹53,000 Lowest | 550 ₹55,000 | 12,675 ₹12,67,500 | 555 ₹55,500 | 553.45 ₹55,345 |
| 6.00 | Items as above For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
(i) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 20 | kg | 634 ₹12,680 | 750 ₹15,000 | 543 ₹10,860 Lowest | 755 ₹15,100 | 753.03 ₹15,060.6 |
| 7.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 3 | sqm | 1,505 ₹4,515 | 1,730 ₹5,190 | 1,298 ₹3,894 Lowest | 1,740 ₹5,220 | 1,786.58 ₹5,359.74 |
| 8.00 | Cutting holes up to 30x30 cm in walls including making good the same:
(i) With common burnt clay F.P.S. (non modular) bricks | 20 | Each | 416 ₹8,320 | 480 ₹9,600 | 380 ₹7,600 Lowest | 485 ₹9,700 | 494.7 ₹9,894 |
| 9.00 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. | 20 | Each | 452 ₹9,040 | 60 ₹1,200 Lowest | 400 ₹8,000 | 65 ₹1,300 | 536.48 ₹10,729.6 |
| 10.00 | Supply of modular bed (King size) of size 77”x78” made out of 1st class wood or best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade including best quality mattress 8” thick (Best Quality) with 02 (two) Nos side tables and back head-rest of height 2½’ with best quality foam 3” thick on ply wood and covered with best quality cloth/reskin of desired shade and colour neatly buttoned complete as directed and specified by the department/institute. | 8 | Nos. | 81,581 ₹6,52,648 | 68,500 ₹5,48,000 | 45,000 ₹3,60,000 Lowest | 68,600 ₹5,48,800 | 80,500 ₹6,44,000 |
Tender Value
₹56.8 L
EMD Value
₹1.1 L
Closing Date
1 Sept 2025, 11:00 amClosed
DIRECTOR, NERIWALM
NERIWALM, TEZPUR, ASSAM
FURNISHING OF NEWLY CONSTRUCTED INTERNATIONAL HOSTEL CUM GUEST HOUSE OF NERIWALM AT DOLABARI TEZPUR
2025_NERIW_872370_1
NRWM/CONST/331/FURHOSTEL/25-26
Open Tender
Civil Works - Buildings
Works
45 days
NERIWALM, TEZPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Payable To NERIWALM REVENUE ACCOUNT
₹1.1 L
16 Sept 2025
7 Aug 2025
2 Sept 2025
7 Aug 2025
1 Sept 2025
7 Aug 2025
Amount
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 25 mm thick
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 10 mm
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 (1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make thickness of powder coating 50 micron) or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (A) For Fixed Portion (i) Powder coated aluminium (minimum thickness of powder coating 50 micron)
Items as above For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) (i) Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Cutting holes up to 30x30 cm in walls including making good the same: (i) With common burnt clay F.P.S. (non modular) bricks
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
Supply of modular bed (King size) of size 77”x78” made out of 1st class wood or best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade including best quality mattress 8” thick (Best Quality) with 02 (two) Nos side tables and back head-rest of height 2½’ with best quality foam 3” thick on ply wood and covered with best quality cloth/reskin of desired shade and colour neatly buttoned complete as directed and specified by the department/institute.
Supply of modular bed (Queen size) of size 72”x76” made out of 1st class wood or best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade including best quality mattress 8” thick (Best Quality) with 02 (two) Nos side tables and back head-rest of height 2½’ with best quality foam 3” thick on ply wood and covered with best quality cloth/reskin of desired shade and colour neatly buttoned complete as directed and specified by the department/institute.
Supply of luxurious 5 seater (3+1+1) Sofa set of standard size with cushion seated (minimum 4” thick) and back with best quality upholstery cloth/Italian reskin of approved shade and colour on 1st class wooden framing 1st class wood side table with 8-10mm thick glass top including varnishing (wood/mahogany finish varnish) complete as directed and specified by the department.
Supply of 1st class wood, four seater wooden dining table with 12 mm thick glass top of size 42”x60” with four nos 1st class wooden chair as per drawing & design with cushion seated and varnished (wood/mahogany) complete as directed and specified by the department.
Supply of wooden table with 1st class wood as per drawing & design (size of table 30”x30”) including 2 nos wooden leisure chairs cushioned seated and back neatly varnished (wood/mahogany) complete as directed and specified by the department.
Supply of reception counter of 96”x36” made out of best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade and colour complete as directed and specified by the department.
Supply of modular wall fitted TV unit of size with rack of size 60”x48” made of best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade and colour complete as directed and specified by the department including a box type platform for keeping the luggage of size 4'x2'x2'.
Supply of 1st class wooden coat stand of size 48”x12” beautifully machine carved and varnished (wood/mahogany) complete as directed and specified by the department.
Supply, fitting & fixing bathroom toughened glass (12 mm thick frosted glass) partition with all required fittings for installation of size 72”x96” complete as directed and specified by the department.
Supply, fitting & fixing best quality linen curtain with inner lining of desired quality, shade and colour including coloured curtain rod 1” dia complete as directed and specified by the department (For doors and windows).
Supply of wall fitted wardrobe of size 6’x4’ with 03 layers rack inside made out of best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade and colour complete including fitting of best quality mirror of size 5’x1½’x6mm thick complete as directed and specified by the department.
Supply of Centre Table of size 48”x24” made of best quality anti-termite water retardant 1st class wood / best quality anti-termite water retardant 19mm ply board (confirming to IS : 710 & IS : 6313) pasted with matt finished sunmica of desired shade and best quality anti-termite water retardant and colour complete as directed and specified by the department.
PANKAJ DAS (BID ID -3275189)
DIPANKAR BAYAN (BID ID -3275176)
ANURAG BAISHYA (BID ID -3275197)
VINAYAK FURNISHINGS (BID ID -3275196)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .