07/EWC(B)/2025-26

Amount

Part-(A) INCREASING CAPACITY OF 33/11KV S/S NAKTADANA FROM 8+10 MVA TO 8+10+5 MVA (PILIBHIT)

Supply of following materials by firm

MS Round Bar 32 mm dia

GI STRIP Flat 50x6mm

DC supply system with one no. float cum boost charger & 01 battery set for 24V. DC supply system with 200A.H. battery capacity with cabnet

Loading, unloading and safe carriage of the following materials from any Store Centre of Electricity store division bareilly to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

M.S. Channel 125x65mm

M.S.Angle 75x75x8mm

MS Angles 50x50x6mm

MS Channel 100x50x2028mm (For top channel & fuse set)

M.S angle lron 65x65x6mm, 2700mm long @ 5.8 Kg/Mt (bracing)

33 KV Post insulator

33 KV Lightening Arrestor

33 KV 400 A Bus Isolator

33 KV VCB 800A 750 MVA

Control pannel I/C for 33 KV Single T/F

33 kv O/D CT CTR 200/100/1-1-1 A

33 KV PT (outdoor) 33KV/110V

11 KV VCB I/C CTR 600/300/5A

11 KV VCB O/G CTR 200/100/5A

11 KV Bus coupler

33KV XLPE CALE 3*300SQMM

11 KV 3x300 mm2 XLPE Cable

11 KV 3x185 mm2 XLPE Cable

33KV XLPE CALE Jointing kit 3*300SQMM

11 KV Cable jointing Kit 3x185 mm2 I/D

11 KV Cable jointing Kit 3x185 mm2 O/D

11 KV Cable jointing Kit 3x300 mm2 I/D

11 KV Cable jointing Kit 3x300 mm2 O/D

STP Pole 11 mtr long

Earthing Complete

Stay set complete 16x1800mm

11 KV disc insulator

11 KV disc fitting

Cost of ACSR Dog conductor

Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2Ω as per details given below.

Laying of M.S. Bar of 32mm dia for making the complete earthmat in the trenches in S/s Yard of 750mm depth and 500mm width with their straightening, cutting accordingly and welding with overlap joint of 100mm cross joint, T joint.

Making and driving of 3 Mtr. Long electrodes from 32mm dia M.S. Bar having one end conical 150mm long by heat tempering including cutting upto 750mm depth from ground level and welding with earth mat.

Making of triangular bridge by using M.S. electrodes and G.I. Strip 50x6mm with providing of well type pipe earthing upto 20 Mtr. Depth below G/L including welding etc. by boaring process at LA and two side of 11 KV S/G including cost of GI Pipe of size 40mm dia 15 Mtr Long of ISI mark.(all material provided by firm)

welding & laying of G.S. strip 50x6mm size with structures and all equipments in switchyard and control room, M.S. Bar including cutting, binding and proper fixing etc. complete. The welding and laying of G.S. Strips to L.A. with full length of structures and also the M.S. bridge near L.A. structures.

Supply of following materials for construction of power tf plinth

Supply of 90 LBS Rail pieces for T/F (44.64 KG. PER MTR.)

Supply of bricks as per standard

Supply of cement as per standard

Supply of sand as per standard

Supply of stone ballast 20mm as per standard

Supply of steel rebar 12mm as per standard

Supply of brick bat as per standard

Construction of new transformer plinth of size 4.5x3.5 Mtr. for upto 10 MVA Transfomer having depth 0.5 Mtr. below ground level & 0.5 Mtr. above ground level. The work including excavation of foundation. base & concreting of foundation base of CC 1:6:12 ratio (cement, fine sand & brick ballast) first class brick work of cement morter of ratio 1:4 for masonry & lintring work of transformer plinth of RCC work of ratio 1:2:4 (cement, coarse sand and store grit of 20mm using MS Bars of 10mm dia(tor) for reinforcement of linter including cutting, bending & binding of MS bars of required plinth size & shape. The work also includes laying of 2 Nos. 3.5 Mts. long rail pieces after cutting in proper size & shape & fitting etc. The plinth will be made as per RESSPO/Approved drawing suitable for 10 MVA transformer & shall be plastered of walls of ratio 1:4 (cement & fine sand)/finished on top and sides of the plinth. ( Only erection )

Fabrication, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30cm above ground level as directed by the Engineer Incharge, Grouting of structure will be done in 1:4:8 ratio of cement, sand & coarse aggregate with material including all accessories

Bus Isolator Structure

Post insulator Structure

33 KV VCB Structure

33 KV CT Structure

33 KV PT Structure

Fuse Set Structure

Lightening Arrestor Structure

Mounting and installation, including Mechnical & electrical fixing and adjusting of the following equipments on their respective structures including proper adjustment:

33 KV Bus Isolator

33 KV Fuse Set (Provided by firm)

Lightening Arrestor

33 KV VCB

33 KV Post insulator

Insttalation and conection of 24 V Battery set with charger (To be provided by firm I.S.I. mark only of DC System with one float cum boost charger & battery set for 24V. System with 150A.H. Capacity with cabinet).

Complete laying and termination of copper control cable in PVC Pipe 4" dia from 5 MVA power T/F and 33 KV VCB in the out door switch yard in the Transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings.

Control Cable 4x2.5 mm2

Control Cable 2x2.5 mm2

Laying of dog conductor alongwith cost of all required calmps and connectors etc. as per RESSPO Approved drawing from bus bar to L.A., C.T., V.C.B., Bus Isolator etc. complete with sagging and making vertical/Horizontal jumper connections through PG clamps and connecting all the equipments with each others through connecting clamps, (All type of insulator, fitting, PG clamp etc. provided by Firm).

Making of M.S. Angle Ladder type frame of Angle (75x75x6mm) & M.S. Strip (50x6mm) near power transformer for power cable with concreting in 1:4:8 ratio of cement, sand & coarse aggregate and proper clamping (50x6mm) of the same with transformer cable (All type of, grouting material etc. will be provided by The firm).

Making of M.S. Angle frame of (75x75x6mm) in the shape of "L" to connect T/F Neutral by copper flexible strip with proper clamping including cost of copper strip. Earthing of Power T/F Neutral shall be done separately including welding with M.S. bar Electrode bridge 1 No. after making in triangular shape and proper connection with well type earthing etc. Grouting of structure will be done in 1:4:8 ratio of cement, sand & coarse aggregate ( All type laying material will be provided by the Firm except steel cables ).

Laying of 11KV cable of different size from power T/F to control room I/C and control room to D/P outside Sub-Station over a pad of river sand . Cable shall be laid 500mm below the ground in the yard by covering three sides with Ist Class brick and Ganga sand (All type laying material will be provided by the Firm except 11 KV cables ).

11 KV Cable hoisting with GI Pipe 6" dia (All type of material provided by the Firm).

Laying of 33KV 3x300 mm2 xlpe cable from existing bus bar gantry to proposed 33 kv bay with support of ladder . Cable shall be laid 500mm below the ground in the yard by covering three sides with Ist Class brick and Ganga sand (All type laying material will be provided by the Firm except 33 KV cables ).

Termination and hosting of 33 KV 3x300 mm2 XLPE cable by filling 33 KV heat shrinkable type cable boxes including proper connection with suitable connectors.

Erection and grouting of double pole structure of STP Poles including stays for 11KV out door feeders, complete in all respect as per RESSPO drawing along with grouting material about 3 meter 6" dia G.I. pipe along with required elbow shall be provided at D/P for power cable including provision of 03 Nos. feeders name plate on D/P. (all type of grouting material provided by the Firm).

Erection of 11 KV incoming, outgoing and bus coupler panels (with testing & setting of relays) in substation control room including grouting of Anchor bolts of panel and making of pocket for power cable to insert in panel from trench and complete filling of control room's tranches by river sand.

Erection & testing of single T/F Control panel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in panel from trench and complete filling of control room's tranches by river sand.

Termination of 11 KV Different size XLPE cable by filling 11 KV heat shrinkable type cable boxes including proper connection with LV side of T/F switch gear panels and double poles by providing suitable connectors.

Work related maintinance of old and used 5 MVA Transformer.

Attending of leakage of power transformer (Replacement of damage gasket kit etc)(all required material will be provided by firm.)

Centrifusing of transformer oil.

Replacement of damage brether and silica jel.(all required material will be provided by firm.)

Replacement of damage WTI and OTI.(all required material will be provided by firm.)

Painting of old transformer.(all required material will be provided by firm.)

Replacement of damage buchholz relay(all required material will be provided by firm.)

Replacement of damaged 33kv, 11kv bushings (all required material will be provided by firm.)

Carriage and top up of transformer oil from any store/workshop of Bareilly Zone 1, Bareilly Zone 2

Shifting of existing 11 KV VCB panel and re arrange its in control room including its power cable, control cable and busbar connections.

Painting of the fabicated structures with one coat of red oxide primer and two coats of synthetic enamel alumm. Paint/green paint of ISI Mark alongwith earthing strip above ground level.

Providing of rubber matting sheet 8/10mm

Part-(B) INCREASING CAPACITY OF 33/11 KV SUBTATION STORE CENTRE FROM 2X5 TO 10+5 MVA (PILIBHIT)

Loading, unloading and safe carriage of the following materials from any Store Centre of Electricity store division bareilly to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

Making of triangular bridge by using M.S. electrodes and G.I. Strip 50x6mm with providing of well type pipe earthing upto 15 Mtr. Depth below G/L including welding etc. by boaring process at TF neutral and body earthing including cost of all required material as GI Pipe of size 40mm dia, round bar 32 mm dia, etc. ( All required material will be provided by firm.)

welding & laying of G.I. strip 50x6mm size with structures and all equipments in switchyard and control room, M.S. Bar including cutting, binding and proper fixing etc. complete. The welding and laying of G.S. Strips to L.A. with full length of structures and also the M.S. bridge near L.A. structures. All required material will be provided by firm.

Mounting and installation, including Mechnical & electrical fixing and adjusting of the following equipments on their respective structures including proper adjustment:

24 V Battery set with charger (To be provided by firm I.S.I. mark only of DC System with one float cum boost charger & battery set for 24V. System with 150A.H. Capacity with cabinet).

Lightening Arrestor

Dismentaling of following damage equipment.

Lightening Arrestor

Complete laying and termination/connection of copper control cable in PVC Pipe 4" dia from 10 MVA power T/F, 33 KV VCB and 33KV C.T. in the outdoor switchyard to the transformer control and relay panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings.(all material will be provided by firm)

Control Cable 4x2.5 mm2

Control Cable 2x2.5 mm2

Shifting and dragging of 33/11 KV 5 MVA transformer from its plinth to safe site in switchyard at store centre substation alongwith proper disconnection of its HT, LV, control cable and earthing connection and doing connection of HT (33kv) and LT(11kv) side of 10MVA power transformer after installation of 10MVA power transformer.

Repairing of existing 33KV VCB in switchyard including repalcement of all required accessories as relay, motor, intrruptor etc. All type of material should be provided by the firm.

Repairing of damage 33KV control pannal including all damage realay,indictor,t&c swich,control wirering etc.All type of material should be provided by the firm.

Painting of the all newly and existing structures with one coat of red oxide primer and two coats of synthetic enamel alumm. Paint/green paint of ISI Mark alongwith earthing strip above ground level.

Carriage of old scrap material from site to store center Pilibhit.

Repairing of complete switchyard fencing and its painting.

Part-(C) RECONDUCTORING OF 33KV LINE PURANPUR TOWN , PILIBHIT ,FROM PURANPUR TOWN TO 132 KV S/S PURANPUR UNDER BUSINESS PLAN WORK 2025-26

Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone to site of work

ST pole 11 Mtr. Long

9.0 M long PCC pole

33 KV cross arm

33 KV pin insulator

M.S. Earthing rod

ACSR Dog conductor

Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing.All types of clamps, stone pad, nut, bolt washers would be provided by the contractor.

Single support of PCC pole 9 mtr long.

Single support of ST Pole 11mtr long.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 before back filling of the pits as per RESSPO schedule. All clamps, nuts, bolts, cement. brick, ballast, sand etc would be provided by the contractor.

Replacement of following damage material of above 33 KV Line.(Material provided by Department.)

Pin Insulators wih Pins

X-arms

33 KV F Clamp (provided by firm)

33 KV X ARM holding clamp (provided by firm)

Concreting of all type of supports in 1:4:8 ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement ,stone ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor of 33 KV Line PURANPUR TOWN PILIBHIT including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.

Single Pole of S.T Pole .

Fixing of danger board and number plate and G.I barbed wire on each pole including proper clamping. All material would be provided by firm.

Safe dismentling of old & rotten ACSR Rabbit conductor of existing 33 KV LINE PURANPUR TOWN Line without damage of any insulator, cross arm, clamp etc. of existing 33 KV line.

Loading. unloading and safe carrige of old & rotten Scrap material from site to Store center, PBT

Part-(D) REPLACEMENT OF DAMAGE 33 KV U/G CABLE OF 33 KV LINE RAMLEELA TOWN PILIBHIT

Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone.to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

33 KV 3x300mm XLPE Cable

33KV 3x300mm cable joitng kit O/D

33 kv 3x300 sqmm xlpe cable s/through

Single CKT 3x300 sqmm 33 kv xlpe cable laying by drill method

Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI PIPE 6'' DIA including its jumpering complete with clamps, nuts and bolts. (ALL MATERIAL PROVIDED BY FIRM )

Fixing of 33 KV JOINTING KIT O/D TYPE

Fixing of 33 KV JOINTING KIT S/THROGH

Part-(E) REPLACEMENT OF DAMAGE 33 KV U/G CABLE OF 33 KV LINE ROOPPUR KRIPA PILIBHIT

Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone.to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

33 KV 3x300mm XLPE Cable

33KV 3x300mm cable joitng kit O/D

Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI PIPE 6'' DIA including its jumpering complete with clamps, nuts and bolts. (ALL MATERIAL PROVIDED BY FIRM )

Fixing of 33 KV JOINTING KIT O/D TYPE

M/s S.S. Refregeration (BID ID -5523396)

Hi-tech power transmission (BID ID -5530123)