REPAIR / REPLACEMENT OF SANITARY FITTING / PLUMBING WORK, PLASTERING FLOORING PLINTH PROTECTION AND JOINERIES WORK IN OMQ AREA UNDER GE (AF) JAMNAGAR NO 2

Amount

Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm , PVC connection 450 mm fixed in position and connecting complete all as specified and directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.

S&F in repair white vitreous china wash hand basin of size 580 x 440 mm, fixed over & including MS brackets comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete . (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for 32 mm discharge pipe complete all as specified and directed.

S&F in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for 40 mm discharge pipe complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs etc complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs etc complete all as specified and directed.

Supply and fix 500 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) tripple layered hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified & directed.

Supply and fix 1000 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) tripple layered hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified & directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia complete all as specified.

S&F in repair 15 mm size long body bib tap with wall flange, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm size short body bib tap cast copper alloy, chromium plated, fancy type with capstan head , screwed down , screwed for iron pipe complete all as specified and directed.

S & F in repairs 15 mm size CP pillar taps, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair 15 mm size angle cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size concealed stop cock with wall flange all as specified and directed

S& F in repairs brass chromium plated overhead shower 100 mm size with 225 mm arm and flange for 15 mm inlet pipe complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of washer of any description all as specified and directed.

M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of brass spindle heavy qualitycomplete all as specified and directed.

Removal of air lock, blockage in water pipes / bib taps / stop valve / pillar tap / angle cock all as required and as directed to ensure proper flow of water complete all as specified and directed.

S&F in repairs stainless steel sink,(304 super steel) 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 460 mm x 535 mm x 203mm, with bowl size 460 mm x 394 mm x 203 mm, including waste assembly, PVC flexible waste pipe complete all as specified and directed.

S&F in repair stainless steel sink (304 super steel) 1.00mm thick with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm x 203 mm with bowl size 405 mm x 354 mm x 203 mm complete including waste coupling, waste pipe complete all as specified and directed. Make : Nirali, Silver Shine (blue star), Prayag

Supply & fix in repair Galvanised iron tank nipple for PVC water tank inlet /outlet suitable for 25 mm bore pipe complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia complete all as specified and directed.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed.

S&F in repairs water tank covers for 500/1000 ltrs capacity tank complete all as specified and directed.

Supply and laying of GI 15 mm Tubes, medium grade ,galvanised,with all fitting laid in trenches fittings on walls concealed type in any type of masnory or laying in floors including taking down existing steel tubing etc complete all as specified.

Supply and laying of GI 20 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masonry or laying in floors including taking down existing steel tubing etc complete all as specified.

Supply and laying of GI 25 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masonry or laying in floors including taking down existing steel tubing etc complete all as specified.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.

Dismantling cast iron work of any description with all fittings and fixtures complete all as specified and directed

S&F 100 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed.

S&F 75 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete.

S&F 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete all as specified and directed.

S&F 75 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete all as specified and directed

S&F in repair cast iron vent cowl 100 mm bore dia complete all as specified and directed

S&F in repair cast iron vent cowl 75 mm bore dia complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls with necessary clamps complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls with necessary clamps complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete type BO, 1:2:4 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified.

S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed.

M&L for cutting holes into or through stone/PCC block wall built CM. and making good in CM 1:3 or PCC type B-1 on required Superficial area n exc 150 sq.cm complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below or above ground level, including removal of debries outside MOD land complete all as specified and directed.

M&L 100 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in floor/ hard standing etc complete all as specified and directed.

M&L 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection including finished the surface even and smooth without using of extra cement complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal of debries to outside MOD land complete all as specified and directed.

M &L for plain cement concrete type E-2 (1:5:10), using 40 mm graded stone aggregate, for filling sunken portion of toilet and similar work complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:3 on sunken portion of toilet on vertical / horizontal surface and mixing only liquid water proofing compound as per manufacturers instructions, finished the surface even & smooth without using extra cement including applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre complete all as specified and directed. Note:- Supply only WPC will be measured & paid separately

Supply and fix white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick area of each tile exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles thickness not less than 7mm of size 450mmx300mm as in skirting / dado etc laid jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over & including 10mm thick backing coat in CM 1:4 complete all as specified & directed.

M&L for light shade vitrified coloured tiles not less than 10 mm thick of size 600x600mm in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over and including 15 mm thick screed be in CM 1:6 complete all as specified and as directed

Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.

M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specifed and directed.

M & L for machine cut & machine polished kota stone slab 20 to 25 mm thick as in kitchen platform laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of Granite/ Kota stone slabs edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. all specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed .

M&L for 15 mm thick rendering in cement mortar 1:4 on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- Supply only WPC will be measured & paid separately

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coat of distemper oil emulsion over a coat of primer over and including cement wall care Putty on wall surfaces complete complete all as specified and directed.

M&L for preparation of new external surfaces of walls including brooming down and applying two coats of cement paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

M&L for Cleaning of HDPE service water tank of capacity exc 250 litre & up to 500 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background complete all as specified and directed.

M&L for Cleaning of HDPE service water tank of capacity exc 500 litre & up to 1000 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background complete all as specified and directed.

sanu enterprise

aarti construction

suvidhiconstruction