Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹9.7 L+₹16,442.84 (1.73%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹9.7 L+₹21,325.65 (2.25%)Rejected-Finance BHATI ABHOYNAGAR WEST VIVEKANANDA CLUB ROAD NEAR HOUSE OF DOCTOR GOURISHANKAR CHAKRABORTY P O AGARTALA TRIPURA WEST PIN 799001 | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹9.8 L+₹27,588.76 (2.91%)Rejected-Finance MIL STN AGARTALA | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹9.8 L+₹28,033 (2.95%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF 01 X STORE ROOM NEAR BLDG NO P-31 (GUN HOUSE) IN ZONE G AT MIL STN AGARTALA
2022_MES_570478_1
8371/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,000
Yes
4 Feb 2023
22 Dec 2022
25 Jan 2023
22 Dec 2022
23 Jan 2023
9 Jan 2023
Amount
Schedule'A' Part-I: B&R works
M&L for Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil.
Excavation in trenches n.exc 1.5 M wide and n.exc 1.5m deep as in soft/loose soil for foundation etc or for shaft walls, cesspit, manhole etc n.exc 10Sqm on plan and n exc 1.5 m depth and getting out.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/loose soil
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point
M & L for Cement Concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete.
M&L for 10mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified..
All as per item No. 6 but 5 mm to 10 mm dia as in Stirrups, spaces & binders complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete in Square, rectangular or polygonal etc.
M & L reinforced cement concrete (Nominal Mix) 1:2:4 20mm graded aggregate type B1 for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L RCC type B1 (1:2:4) using 20 mm graded aggregate) columns, pillars, piers, posts and struts rough finished.
M&L for reinforced cement concrete type (Nominal Mix) 1:2:4 20mm graded aggregate type B1 using 20mm graded stone aggregate as in slab supported in walls, beams, cantilivers, bressummers, lintils over 11.5m Span all as specified and directed.
M&L for reinforced cement concrete type (Nominal Mix) 1:2:4 20mm graded aggregate type B1 using 20mm graded stone aggregate as in Chajja all as specified and directed.
Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.
M&L for rolled mild steel as in roof trusses ( framed) trussed , purlins , crane gamtries, rail,and fastening and heavy brackets framing ( Beam, tee, angle , channel or flat sections ) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E250)quality-B complete all as specified and directed.
M&L PCC 25 mm thick type B-1, 1:2:4 ( 20mm graded aggregate) as in floor as per leveling course all as specified and directed.
Material & Labour 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles complete all as specified and directed.
Material & Labour 10mm thick rendering to wall in cm (1:4) complete all as specified and directed.
M&L machine cut kota stone slab flooring 20 mm thick over screed base including cutting & polishing etc complete
All as per item No. 19 above but as in dado/skirting, riser etc to be cutting required size.
M&L for 15 mm thick rendering in CM 1:4 on fair faces brick work or concrete surfaces mixed with water proofing compound (WPC shall be measured and paid seperately)
M&L for 10mm thick plaster on fair faces of brick or concrete surfaces in CM 1:6 complete all as specified.
Supply of Liquid water proofing compound : Make Dr fixid ( as per manufacturers & Instructions).
M & L for preparation of new plastered surfaces by applying 3mm wall care putty and applying two coats of oil bound distemer over a coat of primer on new plastered surfaces .
M&L for applying two coats of weather coat on new plastered surfaces of wall over a coat of primer after applying a thin layer of wall care putty and preparation of new plastered surfaces to receive paint complete all as specified and directed by Engr-in-Charge.
M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.
M & L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded .
All as per item No. 28 above but without glazing bars .
M&L mild steelwork such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165
Cutting bolls in to brick wall for inserting hold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.
S & F 4 mm thick sheet glass ordinary quality & glazing with oil putty in squares n exe 0.5 sqm in each pane
Supply and fix galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples.
S&F pressed steel frames for doors of (size 125X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
M&L for 2 coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.
S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides
M & L preparation of new wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth.
S&F 125mm size MS butt hinges, medium weight cold rolled mild steel.
S&F 150mm size extruded aluminium alloy handles, fabricated type anodised.
S&F 200mm long aluminium anodized barrel tower bolts of extruded section.
S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with nad including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.
M&L for 2nd class HW in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 cm each.
Schedule'A' Part-I: E & M works
Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.
One light / Fan / Bell Point controlled by one way switch 5 Amp.
One 3 pin 5 Amp socket out let controlled by one switch on same board.
One 3 pin 5 Amp socket out let controlled by one switch on independent board.
Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5/6 Amp, 240 Volts complete all as specified & directed.
Supply and fixing switch socket combination 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed.
Supply and fixing switch socket combination, 2 in 1, 3 pin 6 / 16 Amp, piano flush type complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply and fixing fan regulator 100/120 watt step type AC 220 volts complete all as specified and as directed
S&F lamp Holder insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed.
S &F Miniature circuit breaker single pole and neutral 40 Amps, 230 volt, 10 KA, C-curve all as specified and directed.
S &F Miniature circuit breaker single pole 6 to 32 Amps, 230 volt, 10 KA, C-curve all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable or roof ceiling including connecting up with thre core flexible copper conductor cable of suitabl size complete all as specified and directed.
Supply and fixing LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed
Supply and fixing Bldg security light bracket (with two sets of clamp, nuts & bolts) made out of 40 mm bore .5 mtr long light grade GI pipe bend to shape and with fixing arrangement duly welded all as directed
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 240 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc suitable for ceiling fan 1200 mm / 1400 mm sweep all as specified and directed.
Supply & Fixing sheet metal enclosure with single door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt .
M&L earthing complete with galvanised iron earth plate electrode of size 60 cm x 60 cm x 6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to glavanised earth wire 4mm diameter by means of Bolts, Nuts, check nuts and washers including earthing pit in PCC ( 1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 100 mm thick using 8.00mm dia TMT bars @ 100mm C/C as reinforcement, 20 mm dia GI pipe medium grade for watering pipe , wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm and 15 mm dia light grade GI pipe for protection of earth wire from earth plate to MCB DB including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 as specified and directed.
Supplying and Laying testing PVC insulated steel wire /strip armoured cable 25 sqmm 3 core heavy duty,1100 Volt grade, multistranded aluminium conductor cable laid into trench, passing through pipe,ducts,making electrical connection over pole/panel at one end and into the MCB DB's /Main switch/Change over switch through proper lugs /thimbles at the another end ,having following nominal cross sectional area complete all as specified and directed.
Material and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down to desired thickness complete all as specified and as directed.
Supply and laying brunt brick sub class 'B' of size 23x11.5x7.5 cm locally available best quality laid in treanches for protections of under ground cable complete all as specified and as directed.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. Make of wire : Finolex/Havells/Polycab/Rallison/Plaza. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
M/S UTTAM GANGULY ENTERPRISE
SUMAN DEB
M/S PRITAM ENTERPRISES
M/S SANKAR GOPE
M/S PAUL ENTERPRISE
SHRI SUBRATA GUHA
Pranjit kar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .