8595 Repairs to Joinery petty repair to B n R assets and certain micellaneous works to Dolphin Hills under AGE I R n D NSTL, Visakhapatnam

Amount

Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified.

Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified.

Taking down shutters of any description n.exc.1Sqm each, all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc. 1Sqm and not exc. 2Sqm each, complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S&F MS butt hinge cold rolled medium weight 100mm size

S&F anodised aluminium barrel tower bolt 150mm long.

S&F 'D' type handle aluminium anodized 125mm in size.

S&F Aluminium Sliding Bolt of Size 200mm

S&F in repair 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a primer and necessary preparation of surfaces all as specified and directed.

M&L for complete removal of existing treatment on external surfaces of walls , applying a coat of exterior primer, and applying two coats of premium acrylic emulsion paint with alkali & fungal resistance, dirt resisstance complete all as specified.

M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair tubular towel rail 600mm long of PTMT fixed with & incl CP brass screws & plastic cleats min wt 170gm

S&F in Repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S & F only in repair 300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller plate complete

M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45º at 150mm centre to centre and sealing the same complete all as specified and as directed.

M&L for providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed. [Make: 'Slim line' of M/s Parry ware/ 'Champion' of M/s Hindustan Sanitary ware/ 'Sleek+' of M/s Hindware]

S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.

Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked.

S&F in repair 15 mm dia bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified .

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.

M&L for preparation of newly surfaces of walls and applying two coat of oil bound distemper complete all as specified and as directed.

M&L preparation of newly plastered surfaces and applying two coats of acrylic exterior emulsion paint as approved of any shade/colour in over a coat of primer including preparation of surfaces as per manufacture instructions complate all as specified and as directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth, 75 mm thick and finished even and smooth without using extra cement,

Demolition of cement concrete etc in any description/any location not exceeding 15 cm thickness.

M&L cement concrete type D2 1:4:8(using 40 mm graded aggregate) in foundations, filling and mass concrete.

M&L for cement concrete type B-2 1:2:4 (20 mm graded aggregate) 75mm thick finished fair & even w/o using extra cement

M&L cement concrete type C2, 1:3:6 (40mm graded aggregate) 75 mm thick as in sub base levelling course.

M & L for remove all loose gravel cement mortar, loose cement concrete, dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application. Repair all cracks by cutting “V” groove and fill with PMC mortar prepared in the ratio of ShaliCrete : Cement : Sand (1 : 2 : 5). Ensure gradient of 1 : 100 towards drain by laying cement concrete type B0 1:2:4 admixed with integral waterproofing compound, ShaliPlast LW+ @ 200 ml / bag of cement or equivalent . Ensure that there is no standing water on the applicable surface. Stir ShaliUrethane® BTD or equivalent by a slow speed mixture fitted with a suitable mixing paddle to ensure a homogenous mix. (Mixing of Water is totaly prohibited ). After stirring, wait for the product to settle in order to let entrapped air escape. Slightly damp the surface. Avoid standing water / ponding. Prime the surface using ShaliPrime BTD @ 400 grm / Sqm. Allow the primer to touch dry condition. Apply 1st coat of ShaliUrethane® BTD confirm to ASTM C 836 and ASTM D 6083 @ 1 Kg / Sqm by brush / roller while the primed surface is tacky. Spread non-woven geo-textile of 45 gsm with overlaps of 50 mm in both directions when the surface is still tacky.Allow 1st coat to dry for 10 – 12 hr. Contd......./-

Apply 2nd coat of ShaliUrethane® BTD @ 1 kg / Sqm by brush / roller for final dry floor thickness 1.5mm in two coats . Ensure final curing time of 36 hrs before allowing / carrying out any further work. Extend waterproofing treatment up to 200 mm and terminate into groove on the parapet wall. Fill the groove with PMC mortar with ShaliSBR Latex. Note : Application of water proofing treatment will be done by Authorised Applicator only . Note :Rate for removal of debries obtained from the work to be disposed a distance not less than 2Km incl in the rate quaoted by the contractor.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.

M&L Boulder pitching laid dry and grouted with cement and sand mortar 1:6 complete all as specified and as directed

All as per item No 05 above but except boulders

Raking out joints/ pointing to Keyed pointing to random or polygonal rubble, uncoursed or brought upto course all as directed.

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for glazed ceramic digitally printed tiles of size 300x450mm, 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified.

M&L Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-0 using 12.5mm graded crushed stone aggregate,complete all as specified and directed

M&L Black Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade, icluding making full curving the edges and dismantling existing floor, cooking platform, steps etc complete,complete. all as specified.

Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar all as specified and directed.

M&L chequered cement concrete tiles 30 cmx 30 cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 as specified and directed.

SRI SRK ENGINEERS (BID ID -3332961)

ESWAR CONSTRUCTIONS (BID ID -3325066)

ROHITH INFRA (BID ID -3333021)