C/o Forest Guard Hut Nihari (Lambathach)

Amount

Main Building Portiont:- Excavation in foundation trenches etc. in pick jumper work.

Providing and laying cement concrete 1:6:12 i/c ramming and curing complete excluding cost of form work.

Random rubble stone massonry in cement mortar 1:6 in foundation including dressing of stone.

Providing form work of ordinary timber planking so as to give rough finish i/c centering shuttering(Seismic bond) on plinth and lintel level

R.C.C. work 1:2:4 (1 Cement; 2 sand: and 4 graded stone 20 mm nominal size including curing complete but excluding cost of form work and reinforcement.

Providing tor steel reinforcement for R.C.C. work.

Brunt brick masonry in CM 1:6 in super structure upto 3 mtr, height from plinth level i/c scaffolding etc. complete.

Half brick masonry in cement mortar 1:4 in super structure i/c curing complete

Wood work in frames of doors, windows and clcresting windows and other frames wrought framed and fixed in position in its class deodar wood.

CGI sheet roofing 80 to 60 mm fixed with J or L hooks 19 mm dia, GI limpets and bitumen washers complete

Providng ridges and valleys 90/60 cm over all with 0.60 mm thick prepainted steel sheet

P/F M.S. BP sheet 1.66 mm to 2 mm thick eaves board/facia/ceiling.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete.

Stone soling under floor property hand packed and consolidation by hand ramming complete

Providing form work of ordinary timber/planking so as to give rough finish i/c centering shuttering and propping etc. complete.

Mild steel reinforcement for RCC work i/c bending binding and placing in position complete.

RCC work in 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) i/c curring complete but excluding the cost of reinforcement and form work.

Providing and laying white glazed tiles 10 mm thick flooring.

White glazed tiles 6 mm in skriting, risers of steps and dedo 12 mm thick cement mortar 1:3 (1 cement: 3 sand) and joint with cement slurry.

15 mm thick Cement plaster 1:5 (cement: sand in respective ration in rough sides of bick stones/concrete wails for plastering upto floor two level finished even and smooth including scaffolding.

Providing and fixing MS grill of required pattern plain grill

a)Steel work welded in built up section trusses and framed work/ For ceiling frame work/ Angle iron

For trussesed purlin etc. for roofing as per item No. 21

Preparation and fixing of 4 cm thick panelled glaged or panelled glaged shutter for door and windows.

P/f wire gauge shutter using G.M.S. wire gauge of I.S. designation 85 G. with wire of dis 0.50 mm for doors & window. Including bright finish/black.

Providing and fixing anodized sliding door bolts

Providing and fixing aluminium tower bolts

Providing and fixing aluminium handles

Providing and fixing M.S. hooks and eyes.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt joining and nail (frame work and cover fillets to be paid for separately).

5 cm thick cement concrete flooring 1:2:4(1 cement:2 sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement.

Distempering two coats with oil bound washable distemper of apporved brand and manufacture and of required shade on undecorated wall surgaces to give and even shade over and including priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface gree from mortar droppings and other foreign matters and also including preparing the surface even and sand papered smooth including scaffolding.

Applying primary coat over new wood and wood based surface to give and even shade with enamal shade with pink primer.

Painting two coats (excluding primary coat) on new wood and wood based surfaces with enamel even shade i/c cleaning of all dirt dust and other foreign matter and sand papering and stopping.

Providing plinth protection 50mm thick with cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size)

Sanitary & Water Supply Fitting:- Fixing of indian type WC. Pan with plastic or wooden sheet and lid 14.50 liter flushing cistren and making good the wall & floor complete.

Fixing 10.00/12.50/15.00 litres vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead, valve less syphon, 15mm nominal size brass ball valve with polythene float, CP. Brass handel, union and couplings for connection with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (Overflow) pipe to be measured and paid for separatly.

Fixing of wash hand basion etc. complete.

Fixing of steel sink etc. complete.

Fixing of bevelled edge mirror complete with AC sheet ground fixed on wooden cleats.

Fixing of glass self with CP brass breckets complete

Fixing of towel rail on wooden cleats

Fixing of soap dish

Fixing of PVC soil and vent pipe 10mm dia i/c trenching and refilling etc. complete.

Fixing of PVC Cowel

Fixing of door bend of required dgree.

Fixing of rest bend etc. complete

Fixing of MS holder bat clamps for HCI Pipe

Electrification i/c Material cost

Neelam Kumar (BID ID -583749)

KISHOR KUMAR GOVT CONT (BID ID -583759)