Perinthalmanna Block Panchayath Annual Plan (2021-22), Project No 136-22 Karakkathu Sc Colony Water Supply Scheme in Aliparamba GP (Aliparamba Division) (261 -21)

Amount

Bore well,motor shed andmotor fixing

od1320863/2021_2022 : Providing and fixing 140mm PVC casing pipe suitable for 110mm dia bore well

od1320864/2021_2022 : Drilling 110mm bore well suitable for 140mm dia PVC Casing pipe

50.18.9.22.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap

water supply arrangements

50.18.9.16.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

18.12.2 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work20 mm dia nominal bore

18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore

18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

od1321395/2021_2022 : Constructing and erecting prefabricated MS Sheet pump house with MS angles, MS Sheet, nut and bolt etc complete

od1321396/2021_2022 : Supply and erection of electrically driven best quality reputed make open well /Borewell submersible pumpset having bronze impeller,stainless steel shaft , capable of discharging required lpm agaist a total required head including all required accessories such as panel board,Main switch,suitable starter, volt metre, capacitor ammetre,pressure gauge, reflex valve, sluice valve, suitable size flat submerssible cable, wiring materials, GI delivery pipes of required lengthfor open well , required earthing, erection charges,electrification in the pump house etc. complete.

WATER TANK AND BASMENT

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

MUHAMMED RAFEEQ

Raheem

yousaf

Bidder Name

MUHAMMED RAFEEQ

Raheem

yousaf

abdul gafoor