Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC | ₹1.9 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | Sinoj M George L1 |
|---|---|---|---|---|
| 1.00West Eleri GP Pro.No.380 | ||||
| 1.00 | OD190993/2025-2026:Drilling Bore well of suitable size to accommodate well casing pipe of internal Dia
not less than 150mm for various strata up to 150M below the ground level having an
average 40M Overburden in all classes of soil and rock inclusive of Hire charges for
machineries and other accessories and stores putting up temporary shed and storing | 105 | per metre | 661.68 ₹69,476.4 Lowest |
| 1.00 | OD190995/2025-2026:Supply and erection of 180MM(6Kg/Cm2) or above dia.PVC Casing (ISI Marked )and
labour charges of conveyance to site etc. | 25 | metre | 679.44 ₹16,986 Lowest |
| 1.00 | OD217133/2025-2026:Cost of 180MM PVC end cap | 1 | 1 nos | 294.7 ₹294.7 Lowest |
| 1.00 | 50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 | 170 | metre | 260.19 ₹44,232.3 Lowest |
| 1.00 | 50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | 10 | metre | 282.07 ₹2,820.7 Lowest |
| 1.01 | 18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore | 1 | each | 384.96 ₹384.96 Lowest |
| 1.01 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 5,000 | Litre | 11.37 ₹56,850 Lowest |
| 1.01 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.09 | cum | 336.72 ₹365.68 Lowest |
| 1.01 | OD226977/2025-2026:Laterite masonry with neatly dressed laterite stone of size 35 x 20 x 20 cm or nearest size in cement mortar 1:6 for Foundation & Basement up to plinth level including all cost of materials, labour charges etc. | 1.45 | cum | 5,727.87 ₹8,305.41 Lowest |
Tender Value
₹2.1 L
EMD Value
₹5,142
Closing Date
13 Mar 2026, 3:00 pmClosed
AE
LID EW SECTION WEST ELERI GP
Peralamthattu Drinking water Project
2025_LSGD_795842_2
AE/LSGD/WEGP/02/TN/2025-26 p 380
Open Tender
Civil Works - Others
Item Rate
360 days
AE LSGD
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹5,142
Yes
7 Jul 2026
5 Mar 2026
16 Mar 2026
5 Mar 2026
13 Mar 2026
5 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1West Eleri GP Pro.No.380 | |||||
| 1.001 | OD190993/2025-2026:Drilling Bore well of suitable size to accommodate well casing pipe of internal Dia
not less than 150mm for various strata up to 150M below the ground level having an
average 40M Overburden in all classes of soil and rock inclusive of Hire charges for
machineries and other accessories and stores putting up temporary shed and storing | - | per metre | - | - |
| 1.002 | OD190995/2025-2026:Supply and erection of 180MM(6Kg/Cm2) or above dia.PVC Casing (ISI Marked )and
labour charges of conveyance to site etc. | - | metre | - | - |
| 1.003 | OD217133/2025-2026:Cost of 180MM PVC end cap | - | 1 nos | - | - |
| 1.004 | 50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 | - | metre | - | - |
| 1.005 | 50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | - | metre | - | - |
| 1.006 | 18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore | - | each | - | - |
| 1.007 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | - | Litre | - | - |
| 1.008 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.009 | OD226977/2025-2026:Laterite masonry with neatly dressed laterite stone of size 35 x 20 x 20 cm or nearest size in cement mortar 1:6 for Foundation & Basement up to plinth level including all cost of materials, labour charges etc. | - | cum | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1423199.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
BOQ_1423199.xls
BOQ • 0.30 MB
sbd380.pdf
Tender Documents • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].