Special repairs and maintenance to Godown No.1,2 and 3, Gangmenshed and Compound wall in TNCSC godown campus at Irumboothipatti Village, Krishnarayapuram Taluk in Karur District

Amount

CIVIL WORK

Painting the walls with one coats of Exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. (The paint should be got approved by Executive Engineer before use on works)

Painting old iron work with one coat of synthetic enamel paint of approved quality and colour over one coat of primer. The rate is inclusive of cost of all materials, labour charges, brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Executive Engineer before use on works)

Supplying and fixing PVC sliding door for Disabled persons toilet in with PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mmx30mm. The over all size of frames shall be 50mmx45mm with suitable rabate for housing the shutter including sliding arrangements.

Manufacturing supplying and fixing of steel door with the following specification MS angles of size 40x40x6mm are used for the outer frames and M.S angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. Sheet laid as panel in the shutter and welded intact. M.S.flat 18x5mm is welded over the 32x6mm M.S flat sandwitching the C.R sheet in between additional stiffeners with 18x5mm M.S flat is provided diagonally at the rear side of the shutter, 3 nos of hinges in case of single leaf and 6 nos of hinges in double leaves shutter to be provided 6 nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2 nos one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double lead door at lock rail section in the door in single leaf door, one more adrop in provided in the inner lock rail section of the door one rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers.

Supplying laying and jointing 20MM dia PVC pipe of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.

M YOVAN PICHAI (BID ID -1218047)