ADDITION ALTERATION TO BLDG NO T 121 T 122 AND SPECIAL REPAIRS TO ROOF AND FALSE CEILING OF BLDG NO NP 21 AT MIL STN DHRANGADHRA

Amount

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

M&L for Hardcore Broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

M&L, providing cement concrete1:2:4 type B1 using 20mm graded aggregate as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L, precast cement concrete Block Masonary with solid blocks (except block) type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L for RCC (Nominal Mix) 1:2:4 type B0 using 12.5mm graded aggregate as in Beams, cantilevers ,bressummers lintels over 1.5 m span on walls,beams and columns etc complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 using 20mm graded aggregates as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed .

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

Form work to side and soffits of floor or roof beams , beam haunchings, girders bressummers lintels , cantilevers , shelves including sup - ports, overhangs etc also splays between floors ans beams etc complete all as specified and as directed.

Taking down of roof trusses, above 4 mtr & up to 8 mtr span coupled rafters or trussed beams complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed.

Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed

S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .

S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .

S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S & F Aluminium Hat pegs of 6 pegs,solid body 125mm to 175 mm complete all as specified and as directed.

S&F Harrison rails, mild steel chromium plated with fixing brackets ,stops ,rolleres etc complete all as specified and as directed.

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

Supply & fix purpose made crew bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 16-20 mm dia and exc. 22cm and nexc. 30 cm long complete all as specified and as directed.

M&L for MS TMT bars10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns with and including MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

S&F rolled mild steel section (except materials) as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. Note : Steel section obtained vide item No. 131 & 132 here-in-after shall be reused.

S&F for mild steel for roof truses (framed) ,trussed purlins crane gantires ,rails and fasternings and heavy bracket framming (beam tee angle channel or flat sections )including distance pieces, clats etc and confir to Fe-410-w (GdeE-250) quality A including one shop coat of zinc chrome primer complete all as specified and directed.

S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded including taking down old windows complete all as specified and directed.

S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-12 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6., type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed). complete all as specified and directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F, in false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.

S&F standard aluminium section powder coated any colour as approved for three track window/ventilator frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.

M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed.

S&F Hard drawn steel wire fabric cut to lengths ,bent to shape required and tying with and including mild steel wire (annealed)not less than 0.9 mm in dia supplied and fixed in reinforcement n exc 4 kg per sqm complete all as specified and as directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wide over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified.

M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.

Granite (of any type/ colour) work (table rubbed and polished) 18 to 20mm thick in steps jambs,pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed.

M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection finisheed even and smooth without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction.

M&L for cement concrete 75mm thick type C-2 (1:3:6) using 40 mm graded agg as in sub base to flooring and including demolition of existing concrete work complete all as specified and as directed.

M&L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footpath parks, lawns ,drive ways or light traffic parking etc ,of required strength , thickness & size /shape ,made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand , compacting and proper embedding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with fine sand and cutting of paver block as per required size and pattern ,finishing and sweeping extra sand complete all as specified and as directed.M/S Mehtab Tiles, M/S NITCO(NITCO), M/S Ultra Tiles (ULTRA).

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in cement mortar 1:6 finished the plaster surfaces fair and even complete all as specified and directed.

M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in cement mortar 1:4 complete all as specified and directed.

M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in cement mortar 1:6 and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.

M&L for 15 mm thick cement plaster on (external surfaces) fair faces of brick work or concrete surfaces on wall in cement mortar 1:4 finished the plaster surfaces fair and even complete all as specified and directed.

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

M&L for two coats of exterior emulsion paint (weather coat ,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.

M&L for two coats of exterior emulsion paint (weather coat, anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatement complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.

Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed.

Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty complete all as specified and directed.

Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty complete all as specified and directed.

Preparing of plastered surfaces of walls and applying two coat of white wash on walls including cornices etc complete all as specified and directed

Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

Preparation of New plastered surfaces of ceiling and applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.8 sqm in each pane complete all as specified

Supply and Fixing in repair ot 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed.

M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F in 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 15 mm bore steel tubing and connections complete complete all as specified and directed

S&F in 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 20 mm bore steel tubing and connections complete complete all as specified and directed

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. Note : Item obtained vide item No. 85 here-in-before shall be reused.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. Note : Item obtained vide item No. 86 here-in-before shall be reused.

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Stop valves/ Angle valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

Supply & Fix in repair vitreous china counter top wash basin oval shape, size 550 x 400 mm including PVC waste pipe and waste coupling fixed complete all as specified and directed.

S&F in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

Supply & Fix in repair 15 mm bore Stop valves cast copper alloy chromim plated fancy type with long shank and cup (concealed type) screwed down , high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed.

Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed.

S&F C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed.

S&F in repairs Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.

S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed.

Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.

S&F towel rail 600mm long of chromium plated with and incl chromium plated brass screw and wooden /plastic cleats complete all as specified and as directed.

S&F chromium plated brass Peg set of Six fixed with brass screw and wooden /plastic cleats complete all as specified and as directed.

S&F 28mm dia fancy type Stasinless steel dropery rod fixed with stoper, brackets etc to wall complete as sample approved all as specified and directed by Engr - in - charge.

M&L, in repair, for RCC NP3 150mm dia pipes laid on 150mm thick PCC Cradle PCC 1:4:8 type D2 bed with excavation in depth 0.70m - 1.65m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with DFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional. Note : Rates for RCC pipe in repair alongwith PCC 1:4:8 type D2 bed deemed to be included in quoiting other items shall be measured and paid seperately.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed

S&F 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S &F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

S&F 600x450 mm bevelled edge of slected quality glass mirror mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section ,an any position (un framed) complete all as specified and as directed.

Dismantling of asbests cement (corrugated, semi corrugated, etc) sheets in roof coverings.

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and as directed.

Dismantling structural steel work including door, gatesbut excluding framed truss etc. complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (Light, fan, socket or power etc.) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.

All as per srl item No. 133 here-in-before but for 6 Amp socket outlet on independent board complete all as specified.

All as per srl item No. 133 here-in-before but for 6 Amp socket outlet on same board complete all as specified.

All as per srl item No. 133 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC casing and capping using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC sheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.

All as per srl item No. 137 here-in-before but for 6 Amp socket outlet on independent board complete all as specified.

All as per srl item No. 137 here-in-before but for 6 Amp socket outlet on same board complete all as specified.

All as per srl item No. 137 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified.

S&F modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

S&F modular bell push 6 Amps, 1 module complete all as specified and directed.

S&F, in repairs, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

S&F modular socket outlet 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F modular switch one way 16 Amps flush type 230 volts complete all as specified.

S&F modular socket 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F Holder insulated body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed.

Labour only for Cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50m. Forming jambs, etc. to openings for 300mm exhaust fan including cutting in wall fo cement mortar 1:6, toothing, and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

Labour only for cutting/opening in stone masonary wall suitable for exhasut fan of 380mm dia and making good the disturbed surface complete all as specified and as directed.

Supply and fix of exhaust fan, 300 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

Supply and fix of exhaust fan, 380 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed.

S&F LED compact fitting for LED tube double side connection of 1x20W, 220V, AC decorative box type 4ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-In-charge.

S&F LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type 4ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-In-charge.

S&F LED flat panel of size 2' x 2', 36 Watts, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed by Engr-in-charge. Make Havells/Wipro/Bajaj/Philips

S&F Distribution Board VTPN, 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 100 Amps rating, 25KA breaking capacity for incoming supply and provision of MCB SP/TP for out going supply complete all as specified and directed.

S&F DB with metal plug and socket double pole with MCB SP of 20 Amps, 230 V, 10 KA all as specified and as directed by Engineer-in-charge.

Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed.

M&L for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping or conduit as per site requirement complete all as directed by Engr-In-charge. Two runs of wire for Phase & neutral & one run of earth wire shall measured as on run.

Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection, wires and making good the disturb surface complete all as directed by Engineer-in-charge.

S&F Sheet metal enclosure double door for DB's SPN 12 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

Disconnecting carefully and taking down the existing ceiling fan of any size, and depositing to MES E/M store for safe custody complete all as directed by Engr-in-Charge

S&F ceiling fans 1200mm sweep energy efficient five star rated 230 volts with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) and connecting up with 3 runs of suitable size single core PVC cable from ceiling rose to fan complete all as specified and as directed. Make : Havells/Bajaj/Crompton

S&F Wall mounting fan, oscillating type, single phase with speed regulator step type 400 mm sweep, of Make Havells or equivalent make of Crompton/Bajaj/Orient

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make Havells/Bajaj/Philips/Crompton

Supply of steel body evaporative Duct Type desert cooler with fan motor (ISI marked to IS 996 latest), fan blade of 430mm sweep of aluminum material, 1400 RMP for 2000 cum/hr nominal air capacity,3 Speed Control, wood wool filter pads of thickness size is 15mm or above with non-corrosive wire guard for filter pads, float valve at the inlet, submersible pump , the material of filter panel, grill, top of the cooler body is made of galvanized steel sheet of thickness not less than 0.8mm and sump/water tank of 80 liters capacity including sheet thickness not less than 1.00mm with zinc coating not less than 100 gms/sq.meter and all internal surface of steel body painted with water-resistant paint to IS 9862 latest and brass/ss material drain 3 pin molded plug top of 5/6 amps plug ISI marked, 230 Volts,50Hz, connecting cable with, commissioning complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB using GI earth wire of 4mm dia as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

AMI CONSTRUCTIONS (BID ID -3077472)

Bhumi Construction (BID ID -3083005)