Special repair and maintenance of Angling hut at Pongdam Distt. Kangra HP

Amount

Special Repair and maintenance of Angling hut at Pong Dam, Distt Kangra (HP)

Providing and fixing 5mm thick PVC aesthetic venyl lining on walls plain or coloured,carbed or mosaic/metalled finish laid with approved adhesive ,fittings, on wall.complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile E Fixing with adjustable lugs with split end tail to each jamb complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 40 mm thick complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, Including panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick all complete as per direction of Engineer-incharge.Kiln seasoned and chemically treated hollock wood 40 mm thick shutters complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):18 mm thick complete,in all respects in all leads and lifts as directed by E in C.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete,in all respects in all leads and lifts as directed by E in C.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer (Asian,Dulux ,Berger ,Nerolac Indigo Paints.) complete,in all respects in all leads and lifts as directed by E in C.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (Asian,Dulux ,Berger ,Nerolac Indigo Paints.) complete,in all respects in all leads and lifts as directed by E in C.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (Asian,Dulux ,Berger ,Nerolac Indigo Paints.)complete,in all respects in all leads and lifts as directed by E in C.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge.With cement mortar 1:4 (1 cement : 4 fine sand)complete,in all respects in all leads and lifts as directed by E in C.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Only (Kajaria/Somani/Orient Bell/Asian Granito / Hindware /Nitco) Make.complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete (Kajaria/Somani/Orient Bell/Asian Granito / Hindware /Nitco)complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid(Cera,Somani,Jaguar,Hindware,Jal,Roca,Parryware Make) complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing C.P. brass bib tap of approved quality :15 mm nominal bore (Cera,Somani,Jaguar,Hindware,Jal,Roca,Parryware Make)complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter (Cera,Somani,Jaguar,Hindware,Jal,Roca,Parryware Make)complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete,in all respects in all leads and lifts as directed by E in C.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing &finishing the top smooth.complete,in all respects in all leads and lifts as directed by E in C.

Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of nominal thickness 4mm (weight not less than 10kg/sqm)complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 150x10 mm complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.110 mm dia. mm.complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing toilet paper holder :C.P. brass complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps complete,in all respects in all leads and lifts as directed by E in C.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.complete,in all respects in all leads and lifts as directed by E in C.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 40 mm nominal size) complete,in all respects in all leads and lifts as directed by E in C.

thuru ram

JAKUB DIN

SONU GOVT. CONTRACTOR

NEERAJ KUMAR SHARMA

abhishek guleria

BALBIR SINGH

OM PARKASH GOVT CONTRACTOR