Dry dock repair works of cruise vessel Nefertiti

Amount

HAULING UP AND LAUNCHING

od344803/2022_2023 : Dock Hire Charges of the Yard

od344979/2022_2023 : Wharfage Charges of the Yard

od354757/2022_2023 : Shore power supply including connection and disconnection of cables.

od406738/2022_2023 : Docking of the vessel as per the docking plan having GRT 1119 at a place as directed by the KSINC officers. Keeping the vessel at a suitable height (approximately 75 cm) above the ground level for inspection and launching the same after underwater repairs, as directed by KSINC Officers.

MACHINERY

od357929/2022_2023 : Removing Rudder, inspection, lower bush clearance check and associated works. Rudder Lower bush to be removed if found damaged then New bush to be supplied, machined to size and refitted back. Rudder stock removal and replacement for purposes of inspection of bearings, worn out area build up by welding, bend checking and straightening, renew the parts if required and fitted parts.

od365260/2022_2023 : Overhauling of different pump such as general service, bilge pump, Fire pump, hydrophore pump, fresh water pump, Hydraulic pump, fuel transfer pump, STP pump, AC colling pump etc, complete dismantling of pump, cleaning of the pump, check the seal and bearing of the pump, inspect the motor, assemble the pump, hydrotest the pump to check the leakage, refit in position etc,

od405925/2022_2023 : Removing the propeller with shaft and cutlass bushes from the vessel and dismantling the propeller from the propeller shaft etc. and renew all the bushes and gland packing, shaft worn out area build up by welding, trueness checking and straightening the shaft, balancing and pitch correcting the propeller (IRS approved materials shall be used) etc. all

GENERAL

od374785/2022_2023 : Renewal of all the planks in the sundeck, boat deck, restaurant outside area etc with WPC (wood and plastic compound, 133x25 mm size) 6 inch heavy duty, solid planks. Fixing the WPC plank by using WPC angles, painted RHS pipe (ERW) rectangular tube 50x25x2, SS star flat 19mm, SS buckle 020x0x0 etc after removing the existing planks and accessories, cleaning the surface etc.

od398864/2022_2023 : Renewal of all the wall papers of the vessel, banquet hall, restaurant, passage area etc as per the existing design or new design approved by KSINC after removing the existing wallpapers, cleaning the wall thoroughly etc and fixing the new wallpapers.

ELECTRICAL

od325901/2022_2023 : Supply and replacing steering room fan, 300mm sweep all purpose fan, Crompton Greaves or equivalent make

od325902/2022_2023 : Supply and replacement of shore supply male and female connectors of following rating;63A 3P+N+E legrand or equivalent make connectors

od340683/2022_2023 : Supply installation and testing of the following pressure transmitter of the digital gearbox monitoring unit (e/r) of MV NEFERTITI after replacing the defective one as per the instruction of officer in charge. <br>Honeywell (PX2AG1XX040BSCHX) or equivalent. Under non availability of preferred make, modification to be made in the unit/ coupling for fitting new model as required.)

od345569/2022_2023 : Supply and replacement of defective locks of various panel boards in MV NEFERTITI

od358393/2022_2023 : Testing calibration and certification of 15ppm monitor for oily water separator of MV NEFERTITI

1.23.5 : Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 amp socket outlet

90.10.1.5 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.6 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

od370643/2022_2023 : Supply and fixing 20mm size casing cap for drawing suitable sizes of FRLS PVC insulated copper conductor, single core cable as required.

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

od371887/2022_2023 : Checking for defect in telephone wiring in steering compartment and engine room and rewiring both, if found defective after identifying suitable route with 2 pair armoured marine grade telephone cable as per the direction of KSINC officials

od371888/2022_2023 : Defect identification and rectification of live insulation meter in MSB. (cost of spares are extra and is to be reimbursed as per actuals)

od373942/2022_2023 : Removing the ceiling of banquet hall carefully, replacing the defective led strip lights, refitting the ceiling after providing service openings as required as per the direction of KSINC officials (labour for ceiling removal and related works not included and shall be reimbursed as per actuals. The estimated cost is for replacing entire led strips and charges shall be reimbursed as per actuals.

od374747/2022_2023 : Charges for approved radio firm for periodical/renewal radio survey, including testing repair and certification as per survey requirements

od374748/2022_2023 : Supplying and replacing the GMDSS walkie talkies of the following specification with all accessories including charger unit (220V operation), primary lithium battery, secondary rechargeable battery, helical aerial etc. onboard MV NEFERTITI<br>Make: SAMYUNG; Model: STV-160

od374749/2022_2023 : Supply and installation of main engine & D/g fuel oil transfer indicator electronic control unit of following make onboard MV NEFERTITI. MLI144 or equivalent

PIPE LINES AND VALVES

od360577/2022_2023 : Check all the pipelines/air vents/ bend/ elbow/ flanges in the engine room, DG room, steering room, tanks, void spaces, decks etc of size such as up to 25 mm, including the waterline, fuel line, fire line, air vents and oil line, replace the damaged pipe line / bend/ elbow/ flanges if any with new std scheduled MS galvanized pipe / bend/ elbow/ flanges of existing size and good quality make the pipelines free from air for the smooth flow of sea water, bilging etc. also conduct a pressure test for the pipes, complete.

od360753/2022_2023 : Check all the pipelines/air vents/ bend/ elbow/ flanges in the engine room, DG room, steering room, tanks, void spaces, decks etc of size such as 32 mm to 50 mm, including the waterline, fuel line, fire line, air vents and oil line, replace the damaged pipe line / bend/ elbow/ flanges if any with new std scheduled MS galvanized pipe / bend/ elbow/ flanges of existing size and good quality make the pipelines free from air for the smooth flow of sea water, bilging etc. also conduct a pressure test for the pipes, complete.

od360961/2022_2023 : Check all the pipelines/air vents/ bend/ elbow/ flanges in the engine room, DG room, steering room, tanks, void spaces, decks etc of size such as 65 mm to 80 mm, including the waterline, fuel line, fire line, air vents and oil line, replace the damaged pipe line / bend/ elbow/ flanges if any with new std scheduled MS galvanized pipe / bend/ elbow/ flanges of existing size and good quality make the pipelines free from air for the smooth flow of sea water, bilging etc. also conduct a pressure test for the pipes, complete.

od361188/2022_2023 : Check all the pipelines/air vents/ bend/ elbow/ flanges in the engine room, DG room, steering room, tanks, void spaces, decks etc of size such as 100 mm to 150 mm, including the waterline, fuel line, fire line, air vents and oil line, replace the damaged pipe line / bend/ elbow/ flanges if any with new std scheduled MS galvanized pipe / bend/ elbow/ flanges of existing size and good quality make the pipelines free from air for the smooth flow of sea water, bilging etc. also conduct a pressure test for the pipes, complete.

od362544/2022_2023 : Dismantle the Valves up to DN 50 in the fuel line, fire line, oil line, Water line etc from the vessel overhaul the same by machining the seat of the valve filled by brazing or M I G welding, lapping and repair the damaged spindle and box up with new gland etc and pressure tested as per the requirements of surveyor, If cannot repair replace the same (The contractor should procure the defected valves from the authorized dealer and submit the original dealer bill along with the contractor bill for its reimbursement. 15% of the cost of spares will be paid to the contractor as overhead charges for arranging these items. These procured as well as the replaced items should get inspected by the Engineer who is the in-charge of the work and the un serviceable/ old items should be returned to KSINC for realization of payment).

od364051/2022_2023 : Dismantle the Valves sizes of DN 65 to DN 80 in the fuel line, fire line, oil line, Water line etc from the vessel overhaul the same by machining the seat of the valve filled by brazing or M I G welding, lapping and repair the damaged spindle and box up with new gland etc and pressure tested as per the requirements of surveyor, If cannot repair replace the same (The contractor should procure the defected valves from the authorized dealer and submit the original dealer bill along with the contractor bill for its reimbursement. 15% of the cost of spares will be paid to the contractor as overhead charges for arranging these items. These procured as well as the replaced items should get inspected by the Engineer who is the in-charge of the work and the un serviceable/ old items should be returned to KSINC for realization of payment).

od364157/2022_2023 : Dismantle the Valves sizes of DN 100 to DN 150 in the fuel line, fire line, oil line, Water line etc from the vessel overhaul the same by machining the seat of the valve filled by brazing or M I G welding, lapping and repair the damaged spindle and box up with new gland etc and pressure tested as per the requirements of surveyor, If cannot repair replace the same (The contractor should procure the defected valves from the authorized dealer and submit the original dealer bill along with the contractor bill for its reimbursement. 15% of the cost of spares will be paid to the contractor as overhead charges for arranging these items. These procured as well as the replaced items should get inspected by the Engineer who is the in-charge of the work and the un serviceable/ old items should be returned to KSINC for realization of payment).

STEEL RENEWAL

od355150/2022_2023 : Gauging the thickness of the plates, beam, frame etc. at different portion of the vessel using, ultrasonic thickness gauge after chipping, scrapping and filing the surface.

od355378/2022_2023 : Cutting and removing the old damaged, weakened, severely damaged various thickness MS plate/MS flat/MS angles/MS rods/ beams/ girders etc. in various places of the vessel without damaging any other portion/ structures/ member on the vessel and Supplying and welding with new various thickness MS plate of IS:2062 GR B quality/ MS angle/ MS flat/ MS rod/ beam/ gazette of existing size and shape to the various portions on the vessel already removed damaged portion , after heating and bending into shape, V cut on the matting edge of the plate and welding three layer on both sides together. The rate including the cost of materials, welding charges, tools, plants, scaffolding, other incidental expenses etc. complete

od356193/2022_2023 : Supplying and fitting by welding zinc anode of designed weight (excluding the weight of bracket) with bracket on the underwater portion of the hull without any damage etc. complete after removing existing damaged anodes.

SURFACE PREPARATION AND PAINTING

od353733/2022_2023 : Removing the thickly formed oyster coating and other vegetable growth from the underwater portion of the vessel including cleaning the surface etc

od354688/2022_2023 : Copper slag blasting of the hull outside of the vessel at the standard of SA 2.5

od354838/2022_2023 : Chipping scrapping and cleaning the complete surface of the vessel body, tanks, engine room, DG room, void spaces, machineries, pipelines and other accessories of the vessel body

od366438/2022_2023 : Vessel external artistic works include recreation of existing design, add new designs to existing works or new design approved by KSINC include all the materials, labour, tools and plants, incidental expenses etc. <br><br>

od374118/2022_2023 : Painting of Hull exterior and bulwark as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od373055/2022_2023 : Painting of super structure, mast, wheel house, funnel inside and outside, deck fittings and machinery, engine room chequered plate, engine room pipe etc as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od374371/2022_2023 : Painting of bridge deck, boat deck, forepeak deck, sundeck, poop deck, restaurant area, banquet hall, passage etc as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od372788/2022_2023 : Painting of ballast tank, fresh water tank, cofferdam, void spaces, chain locker etc as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.<br><br>

od372977/2022_2023 : Painting of stores, galley, kitchen, access passage etc as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od374583/2022_2023 : Painting of engine room, engine room bilge, generator room, steering compartment, DG room, emergency DG room etc as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od396569/2022_2023 : Painting of keel to water line as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od397998/2022_2023 : Painting of Anchor chain and Anchor etc as per the paint scheme in presence of marine paint representative. All the tools and plants required is under the scope of the contractor. Payment shall be made as per the actual area of completion of work.

od406745/2022_2023 : High pressure washing the underwater portion of the vessel complete

LSA AND FFA ITEMS

od348739/2022_2023 : 5 yearly inspection and certification of lifeboats

od350264/2022_2023 : 5 yearly inspection and certification of lifeboat davits

od351423/2022_2023 : Annual servicing and certification of life rafts

od351589/2022_2023 : 5 yearly inspection and certification of life raft davits and Fall wire renewal if required

od351802/2022_2023 : Annual Inspection and Servicing of SCBA Cylinders

od399317/2022_2023 : IRS/ MMD survey fees

od406515/2022_2023 : Annual Inspection, testing and Servicing of EEBD Cylinders

od406516/2022_2023 : Annual Inspection, testing and Servicing of SCBA Cylinders

Mandovi Drydocks

Bidder Name

Vijai MArine Services

Mandovi Drydocks