CONSTRUCTION OF BOUNDARY WALL LENGTH 175.0 MTR. FOR DEVELOPMENT OF SHAHEED CAPT. VIKRAM BATRA NAGAR VAN AT BINDRAVAN PALAMPUR IN PALAMPUR FOREST RANGE UNDER PALAMPUR FOREST DIVISION PALAMPUR DISTT KANGRA HIMACHAL PRADESH

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, including getting out the excavated soil/ordinary rock and disposal of surplus excavated soils upto all lead and lift as per direction of Engineer In Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. including carriage of material upto all leads and lifts and as per direction of Engineer In Charge. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete and in gratings framed guard bars, ladders, railling,brackets and similar works as per approved make (TATA, Jindal (Hisar) Prakash Steel, Bhushan Industries) including carriage of material upto all leads and lifts and as per direction of Engineer In Charge.

Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). with all taxes and including carriage of material upto all leads and lifts and as per direction of Engineer-In-Charge.

Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering in all works up to plinth level including carriage of material upto all leads and lifts and as per direction of Engineer In Charge.

Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering in all works up to plinth level including carriage of material upto all leads and lifts and as per direction of Engineer In Charge.

Random rubble masonry/ polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls.

Brick work using common burnt clay second class building bricks with cement mortar 1:5 (1 cement : 5 sand) in super-structure above plinth level upto floor two level including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Half brick masonry in Second Class Bricks common burnt clay building bricks in Cement Mortar 1:4 (1 cement:4 sand) including carriage of material upto all leads and lifts and as per direction of Engineer-In-Charge.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in Foundation and plinth, walls including attached but tresses, pilasters, and their caps and bases and string courses etc. upto floor two level with carriage of all materials upto all leads and lifts as per Engg. in Charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc.and removal of the same for insitu-reinforced concrete & plain concrete work in drains.i/c carriage of materials of all leads and lifts as per Engg. in Charge.

Painting two coats of approved brand (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with readymixed paint other than white.

Providing and laying weep hole in brick masonry/stone, masonry/plain reinforced concrete in abutment,wing wall,retaining wall with 110 mm diameter PVC pipe with 4 kg/cm² pressure extending through the full width of the structure with slope of 1:20 as per drawing and technical specification including carriage of material in all leads and lifts and as per direction of Engineer-In-Charge.

15mm Cement plaster in cement mortar 1:5 (1 cement : 5 sand) in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces and over ceiling and/ sloping roofs after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Painting two coats (excluding priming coat) on new concrete/ masonry/ plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade, including cleaning of all dirt, dust and other foreign matter and sand papering as required.

Ankit Garg (BID ID -508421)

Sameer Bhatnagar (BID ID -509778)

Ankit Thakur Contractor (BID ID -509791)

SAVITA DEVI (BID ID -509460)

SANJAY KUMAR JASWAL GOVT.CONTRACTOR (BID ID -509772)