Provn of Parade-cum-enrolling shed at ARO Ludhiana under GE Ludhiana

Amount

Sch 'A' sec-I

Surface excavation n exc 30cm deep and averaging 12.5cm deep and getting out in soft/ loose soil complete all as specified as directed by Eng-in-charge.

Excavation in trencehes n exc 1.5 Mtr wide & N exc 1.5 Mtr deep and getting out in soft/loose soil complete all as specified as directed by Eng-in-charge.

M&L, PCC (1:5:10) type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified as directed by Eng-in-charge.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 .complete all as specified as directed by Eng-in-charge.

M&L for RCC (1:1 1/2:3) nominal mix using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified as directed by Eng-in-charge.

M&L for RCC (1:1 1/2:3) nominal mix using 20mm graded stone aggregate as in column peir post and struts.complete all as specified as directed by Eng-in-charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed by Eng-in-charge.

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed by Eng-in-charge.

M&L for Mild steel TMT bars 10m dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified as directed by Eng-in-charge.

M&L, Ditto as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified as directed by Eng-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified as directed by Eng-in-charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified as directed by Eng-in-charge.

M&L for RCC (1:1 1/2:3) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified as directed by Eng-in-charge.

M&L, Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed by Eng-in-charge.

M&L, rendering 12mm thick on fair faces of brick work or concrete surfaces with CM (1:6) Internal complete all as specified as directed by Eng-in-charge.

M&L, rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 1st 10mm & 2nd 5mm using water proofing compound in both layer with CM (1:4) External complete all as specified as directed by Eng-in-charge.

Supply only WPC @ 3% by weight complete all as specified as directed by Eng-in-charge.

M&L, Machine cut kota stone slab flooring 20-25 mm thick over 20mm thick cement screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 100 mm thick PCC (1:2:4) type B1 over sub base including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L, Machine cut kota slab 16mm to 18mm thick in risers of step skirting dado over 10mm rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L, Moorum/red bajri filling in floors or pavings,laid in layers n exc. 15 cm thick,spread,leveled and rammed including watering complete all as specified as directed by Eng-in-charge.

M&L for 75mm thick cement concrete 1:4:8 Type D2 (40mm graded aggregate) as in floor finished complete.complete all as specified as directed by Eng-in-charge.

M&L for Preparing surfaces, plastered or unplastered new surfaces on walls and applying two coats of dry distemper over a coat of primer. complete all as specified as directed by Eng-in-charge.

M&L, two coats of cement based paint over one coat of primer over new plaster surfaces of any description on walls complete all as specified as directed by Eng-in-charge.

M&L for Preparation of steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified as directed by Eng-in-charge.

S&F, Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.(FE-410-W, gde-E-250) of quality-B. complete all as specified as directed by Eng-in-charge.

S&F, Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.(FE-410-W, gde-E-250) of quality-B. complete all as specified as directed by Eng-in-charge.

S&F, Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified as directed by Eng-in-charge.

S&F, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified as directed by Eng-in-charge.

S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified as directed by Eng-in-charge.

M&L for 50mm thick cement concrete type B1 1:2:4 using (20mm graded aggregate) as in plinth protection complete all as specified as directed by Eng-in-charge.

M&L, Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed by Eng-in-charge.

M&L for 4 mm thick E -classic board tiles as in ceiling tiles 600x600mm x4mm thick fixed with 4 mm dia G I suspenders @600x600 c/c both ways including necessary galvanised iron powder coated frame work at size 28x24x0.9mm thick main and supplimentray joint and 24x24x0.9mm thick angle at corners.complete all as specified as directed by Eng-in-charge.

Surface excavation not exc 30 cm deep and averaging 15 Cm deep and getting out in soft/soose soil.complete all as specified as directed by Eng-in-charge.

M&L, 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor.complete all as specified as directed by Eng-in-charge.

M&L, 60mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand. complete all as specified as directed by Eng-in-charge.

M&L for Sand filling under floors or in foundations incl. watering and consolidation.complete all as specified as directed by Eng-in-charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.complete all as specified as directed by Eng-in-charge.

Removing excavated spoil to a distance not exc 50 mtr and depositing where directed not exc 1.5 mtr above standing point complete all as specified as directed by Eng-in-charge.

Sch 'A' sec-II

M & L for point wiring with PVC unsheathed, fire resistance, stranded copper conductor of size 1.5 sqmm (nominal cross sectional area ) single core cable in and including concealed/ surface (surface only on roof & colomns) wiring incl PVC conduit medium grade, ISI marked, 20 mm or higher dia complete with all accessories/fittings and sunkan MS boxes of thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with screws & washers including unsheathed single core PVC insulated cable green in colour 1.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, complete all as specified & directed for the following.

One light /fan /bell /exhaust fan point controlled by one , one way 5/6 switch.

One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, oneway switch single pole 5/6Amps

All as per item 40.02 but on the same board with other switches /socket.

M & L for point wiring with PVC unsheathed, fire resistance, stranded copper conductor of size 2.5 sqmm (nominal cross sectional area ) single core cable in and including rigid non metalic PVC conduit 20 mm dia or higher size "medium " grade ISI marked concealed/surface (surface only on roof & colomns) complete with all accessories/fittings and MS box thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with screws & washers including unsheathed single core PVC insulated cable green in colour 2.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, for one three /six pin 15/16 amps power socket controlled by one 15/16 amps switch complete all as specified & directed by Engineer in Charge.

S&F , switch piano flush type white /ivory finish 5/6 Amps, single pole one way complete all as specified & directed by Engineer In-charge .

S&F, switch piano flush type white /ivory finish 15/16 Amps single pole one way complete all as specified & directed by Engineer In-charge .

S &F, socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type - complete all as specified & directed by Engineer In-charge .

ditto as above but 3 pin 5/6 Amps & 3 pin 15/16 Amps complete all as specified & directed by Engineer In-charge .

S&F, ceiling rose surface Bakelite AC 220/240 volts 3 terminals complete all as specified & directed by Engineer-in-charge.

Supply and fixing , 20 Watt LED lighting fixture (4 Ft) with trimline is a robust high performance batten and LED luminaire comprises of extruded channel in thermally conductive material and high translucent serrated milky white diffuser is used to get glare free and smooth light distribution and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

S&F , high efficiency 2x2 recess 24 Watt ultra modern designed architectural LED luminarie which provided soft light and glare symmetrical illumination suitable for armstrong/grid ceiling and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr - in - Charge.

Supply and fix , LED security light fittng 25 watt made up of pressure die cast housing with toughened glass and high power LEDs with option secodary optic with IP 66 protection including SPD for building security purpose with bracket made of GI pipe light grade 40mm dia 1.2 mtr long bend to shape as required and fixing with two nos MS clamp of size 40x6mm complete all as specified and directed by Engr in Charge.

S&F, MCB, single pole 240 Volts 5 to 30 Amps complete all as specified & directed by Engineer-In-charge.

S&F, Isolator single pole and neutral 240 Volts 40 Amps complete all as specified & directed by Engineer-In-charge.

S&F, sheet metail enclosure for DB , eight way , SPN, with 200 Amps bus bar , 240 Volts suitable for housing MCBs and isolatorand making niche,replastring to match with existing surface etc complete all as specified & directed by Engineer-In-charge.

Supply and fixing , ceiling fan 1200mm sweep including provision of cord flexible copper conductor 23/0.0076 three core from ceiling rose to connector complete all as specified & directed by Engineer In-charge .

M&L for earthling complete including earthwork , with galvanized steel earth plate, electrode 600x 600x6 mm thick , buried directly under ground (earth pit not less than 2.25 m below ground level ) with top edge of the plate not less than 1.5 below ground level connected to galvanized earth wire 4.0 mm dia by means of nuts, bolts, check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No 3 connected to main switch board, including all necessary excavation & earth work in hard/dense soil, common salf and charcoal dust mixed & packed 150 mm thick homogeneous layer all around the GI earth plate, earth pit chamber made out of cast iron frame with hinged door , GI protection pipe light grade upto 7.5 meter from electrode complete all as specified & shown on drawings with watering pipe .complete all as specified & directed by Engineer In-charge .

Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 10 Sqmm complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exc. 1.5 mtr deep for laying of cables and getting out soft/loose soil complete complete all as specified and directed by Engr in Charge

M & L for filling dry and clean sand in trenches for cable 8 cm deep below and 15 cm above for cable cushioning complete all as specified and directed by Engr in Charge Note:- Thickness of 18cm after punning shall be considered for payment.

M & L for sub class 'B' brick of size 230x115x75mm laid flat work length equal to width of brick on sand for protection of under ground cable complete all as specified and directed by Engr in Charge

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in trenches complete all as specified and directed by Engr in Charge

Removal of surplus soil obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr in Charge

M & L for GI pipe 40 mm dia Light grade fixing to wall or laying in floors for protection of cable complete all as specified & directed by Engineer In-charge .

ANUJ ABROL CONTRACTOR

PK ENTERPRISES