CERTAIN CIVIL MAINT WORKS IN THE LIVING ACCN FURNITURE STORES AND TOILETS OF BAND LINE AND FURNITURE YARD AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each ccomplete all as specified and directed

Taking down shutters of any description.exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description. n.exc 1 sqm each complete all as directed

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification and drawing in SSR complete all as specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors including taking down existing tubing, complete all as specified and directed

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors including taking down existing tubing complete all as specified and directed

Rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, (work to be carried upto 7.5 Mtr height) complete all as specified and directed. Note- WPC will be measured paid as supply only under respective items separetely

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed.

Preparation of new plastered or unplastered surface of ceiling and applying three coat of white wash complete all as specified and directed

Preparation of new plastered or unplastered surface of wall and applying three coat of white wash complete all as specified and directed

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of cement base paint (snowcem) on walls complete all as specified and directed

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of cement base paint (snowcem) complete all as specified and directed

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

All as per item No 20 here in before but except bricks complete all as specified and directed

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor including demolition of existing old cement concrete etc complete all as specified and directed.

100mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in hardstanding including necessary formwork and spike rolling or making impression of expanded metal while the concrete is green etc and including demolition of existing old cement concrete in complete all as specified and directed

30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc (with sash bars) devided into squars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed

35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

Hacking out old broken glass pane (any size thickness and description) from wooden frames complete all as specified and directed

3mm thick sheet glass ordinary quality in square n exc 0.50 sqm each pane glazed with oil putty or fixed with wooden bead complete all as specified and directed

Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed

Butt hinges, 75mm long, medium weight, cold rolled, mild steel complete all as specified and directed

200 mm long aluminium anodized, barrel tower bolts of extruded seciton and fixed (ISI marked) complete all as specified and directed

100 mm long aluminium anodized, barrel tower bolts of extruded seciton and fixed (ISI marked) complete all as specified and directed

150mm extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed

100mm extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.

300mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as specified and directed

Floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in door, overall length of cover plate 150mm complete all as specified and directed

300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling and removing rubbish off the premises complete all as specified and directed

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling and removing rubbish off the premises complete all as specified and directed

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with tile and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling and removing rubbish off the premises complete all as specified and directed

Machine cut Kota stone slab flooring 20-22 mm thick laid over and including 20mm screed bed in CM 1:4 laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including grinding,rubbing and polishing mirror finish and dismantling of the existing kota stone flooring of any description etc complete all as specified and directed

Chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete including dismantling of existing tiles of any description complete all as specified and directed

MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

40mm thick PCC type B-1 1:2:4 (with using 20mm graded stone aggregate) as in flooring and finishing the surfaces even and smooth using extra cement complete including demolition of concrete complete all as specified and directed

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings fixed in repair complete all as specified and directed

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including concrete bedding and making good existing floor fixed in repair complete all as specified and directed

PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as specified and directed

PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed

15mm bore stop valve chromium plated male end screwed both end for iron pipe fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) cat part No SQT-513 AKN or equivalent of cera/Hindware

20mm bore stop valve chromium plated male end screwed both end for iron pipe fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) cat part No SQT-513 AKN or equivalent of cera/Hindware

15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.

15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) cat part No SQT-512KN or equivalent of Cera/Hindware

Vitreous china wash basin, white, flat back, size 550x400mm including bracket, 32mm brass CP waste fitting, PVC waste pipe fixed in repair complete all as specified and directed.

Chromium pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed. Make- ESSCO (Jaquar) SQT-507KN or equivalent make of cera/Hindware

110mm dia PVC (SWR) sanitary short connection socket to fit WC outlet fixed in repair complete all as specified and directed

PVC (SWR) bends 75 mm dia any radius fixed in repair complete all as specified and directed.

PVC (SWR) bends 110 mm dia any radius fixed in repair complete all as specified and directed.

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gm) fixed in repair complete all as specified and directed.

20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gm) fixed in repair complete all as specified and directed

PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in surface channels and drains including demolition and taking out of existing cement concrete of any description complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Complete removal of existing treatment on old decorated surfaces (plastered/un-plastered) of walls including cornices and making good surface by applying a coat of 1.5 mm thick Birla/JK Putty complete all as specified and directed.

Preparation of plastered surfaces of walls Facia, Chhajas and applying two coat of Appex or weather proof paint over a coat of primer complete all as specified and directed

Preparation of plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58mm, a pair of brackets, fixed in repair complete all as specified and directed

Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod fixed in repairs complete all as dierected.

Brass chromium plated towel rail 600mm long fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

6mm thick cement corrugated or semi corrugated sheet in roofs fixed in repair with L or J type bolt including dismantling existing sheets complete all as specified and directed.

2nd class hard as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding ridges to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Pre- painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Regular modified polyester colour coated plain galvanized tiles profiles sheet 0.5mm thick inclusive of protective coating as in roof coveringl, fixed to steel/wooden member with self drilling zincolium coated metal screws having cap with rubber and metal washer including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

Regular modified polyester colour coated plain galvanized sheet 0.5mm thick inclusive of protective coating as in ridge valley roof covering/cladding ridges to wall, fixed to steel/wooden member with self drilling zincolium coated metal screws having cap with rubber and metal washer including dismantling existing sheeting any type, gauge, thickness etc complete all as specified and directed

0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L or J type hooks and washer as in roof, wall etc with grade of zinc coating 120 complete including dismantling existing sheets all as directed.

0.80mm thick plain galvanized mild steel sheeting with grade of Zinc coating 120 fixed with "L"or "J" type hooks and washer as in ridges, hips, valley gutter etc including dismantling old sheets in ridges, hips valley gutter any pattern etc complete all as specified and directed

2nd class hard wood, plain fillet, bullnosed, splayed, chamfered or rounded on one edge, clean sawn, secured with nails, sectional area exc 3 sqcm but n.exc 6 sqcm complete fixed in repair complete all as specified and directed

Glass dividing strips 3mm thick and 38mm wide inserted in position and confirming to design complete all as specified and directed

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified.

5.0 mmm thick sheet glass ordinary quality in square n exc 0.50 sqm each pane glazed with oil putty or fixed with complete all as specified and directed

4mm thick figured glass type, pin head type and glazing with oil putty in squares n exv .5 sq in each pane complete all as specified and directed

4mm thick cement building boards fixed in ceiling to timber framework with screws including all accessaries and including dismantling existing boards any thickness including cover fillets with and including preparation of new surface of cement board and applying three coat of white wash etc complete all as specified and directed.

Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 914 mm x 460x 203 mm bowl size 405 mm x 354 mm x 203mm complete all as specified and directed. Make :- Make:- Prayag Cat part No.1239DM or equivalent in Blue star/Nirali.

18 mm prelaminated PVC board interiror grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber / steel frame work as in cupboard shelves fixed in repair complete all as specified and directed

Vitreous china bowl urinal flate back size 430 x 370 x 340 mm with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1.2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixed in repair complete all as specified and directed

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded Drg No TD32 sh 1/10 to 10/10 complete all as specified and directed.

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded Drg No TD32 sh 1/10 to 10/10 complete all as specified and directed.

Steel ventilators with top hung shutter including hinges, steel peg stay Drg No TD088 sh 1/17 to 17/17 complete all as specified and directed

Vitrified ceramic jointless tiles light shade 10 mm thick (square/ rectangular) polished, area of each tile ex 0.18 Sqm but not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 and dismantling of existing floor tiling and removing rubbish off the premises complete all as directed.

Vitrified ceramic jointless tiles Light shade 10 mm thick (square/ rectangular) polished, cut to size as required, as in vertical surfaces such as dado, skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 10 mm thick rendering in cement mortar 1:4 finished rough to receive tiles including dismantling of existing wall tiling and removing rubbish off the premises complete specified and directed.

Glazed ceramic coloured joint free tiles of size 450x300mm x 7mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tile with and including 10 mm thick rendering in cement mortar 1:3 finished rough to receive tiles including dismantling of existing wall tiling and removing rubbish off the premises complete all as specified and directed.

Granting doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) fixed in repair complete all as specified and directed.

15mm Chromium plated wall mixture with 115mm long bend pipe for connection to overhead shower (with bush and piston divertor fitting) with areator fixed in repair complete all as directed. Make ESSCO (Jaquar) cat No,SQT-517BKN or equivalent of Make cera/Hindware.

Clean the surface of roofs, walls, corner of window and door frame, slab and similar works by removing dust, loose particles, oil & grease to enusure the surface is clean, dry and sound and spread smart care hybrid polyurethan sealant in joint, cracks, and spread at edges to ensure adhension of sealant at both edges of joint/crack and then level the sealant with spatula/putty knife and finally finishing by tooling the surface with a concave shape with shop water complete all as per manufacturer instrcution and as directed. Make:- Asian paint product code no 5428 or equivelent of STP BERGER/Shalimar/Pidilite Industries Ltd/Structural Water Proofing Co Pvt Ltd/ Apar Infotech Pvt Ltd.

All as per per item No 106 here in before but sealant filling spreaded to cover holes of L/J hooks average dia 6-8 mm on CGI/PGI/Steel/AC roof sheet complete all as specified and directed. Make:- Asian paint product code no 5428 or equivelent of STP BERGER/Shalimar/Pidilite Industries Ltd/Structural Water Proofing Co Pvt Ltd/ Apar Infotech Pvt Ltd.

Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed

PCC (1:3:6) type B-1 (using 20mm graded stone agg) as in roof kerbs, mud stops, coping, kneelers, apex stone, bed plates, kerbs roofrounded or chamfered on edges complete including demolition of existing cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

PCC (1:2:4) type B0 (using 12.5mm graded stone agg) as in roof kerbs, mud stops, coping, kneelers, apex stone, bed plates, kerbs roofrounded or chamfered on edges complete including demolition of existing cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

50mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof padding and finishing the concrete surface fair and even complete all as specified and directed.

Screed bed 10mm thick in CM 1:4 finished even and smooth without using extra cement on roof mixed with water proofing compound as per manufacture instruction (WPC shall be measure and paid separaterly) etc complete all as directed.

A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment from RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance n.exc 500m complete all as directed. Note:- The work shall be executed through authorised applicator approved by GE.

Udaipur green marble work, 18 to 20 mm thick (table rubbed and polished) as in cooking platform with and including 20 mm thick cement screed in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges including dismantling of existing marbal work complete all as specified and directed.

Hasp and staple 125 mm, safty type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed in repair with screws complete all as specified and directed.

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed

Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:6 complete including demolition of existing RCC work etc complete all as directed. (Note: Reinforcement shall be measured and paid separately under respective items of BOQ)

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed.

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Powder coated aluminium anodised door with frame and shutter, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm fixed with rawal plug. Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D' type 150mm, Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stooper cleat - 02 Nos including taking down existing doors etc and making good of wall complete all as directed.

Powder coated aluminium anodised windows/ventilators with side hung shutter and frame made with aluminium section shall be of size:- Frame 65 x 40mm x 1.98mm thick, Top/bottom and side style/rails of Shutter - 44 x 47mm x 1.98mm thick, rubber gasket, aluminium beading. Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and including taking down existing and making good of wall surface with matching to existing surfaces complete all as directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed in repairs complete all as specified and directed.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners brass handles etc as specified in clause 10.24 of SSR Part -I errected in position and securing runners with holdfasts and brackets including taking down existing steel gate complete all as specified and directed.

Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

Sharda Enterprises

M/S RAJESH KUMAR GOYAL

M/s Vinod Singh Negi

M/S S P BUILDERS

M/s caspur construction company