PROPOSED WORK FOR CONSTRUCTION OF CIVIC CENTER IN ADHEWADA TPS 7, FP NO. 61 FOR BHAVNAGAR MUNICIPAL CORPORATION, BHAVNAGAR.

Excavation for foundation upto 1.5 m depth including

R&B SOR/ CHAPTER- sorting out and stacking of useful materials and disposing

4/(04001A) off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Excavation for foundation for depth from 1.5 m to 3.0m

R&B SOR/ CHAPTER- including sorting out and stacking of useful materials and

4/(04002A) disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m

R&B SOR/ CHAPTER- including sorting out and stacking of useful materials and

4/(04003B) disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ

R&B SOR 24-25, Item Code piles) and getting out the soil and disposal of the surplus

04010C excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(iii) 300 mm

(ii) Uncoursed Rubble Masonry with hard stone of

R&B SOR 24-25 (07001BA / )- approved quality in foundations and plinth in Cement

(7.6, page 74) Mortar 1:5 (1-cement : 5-coarse sand including levelling up

Providing Supplying and laying Filling in foundation, plinth,

trench and uneven area of plot (for levelling and

maintianing slop) with murrum or selected soil in layers of

20 cm. Thickness. Including levelling, watering, ramming

and consolidating etc. comp (cow seating area,garden

soil,murrum)As dirceted by Architect.

Providing and laying ordinary cement concrete M-150 and

curing complete including the cost of form work but

7.00 SOR R&B 2024-25-05023AA excluding the cost of reinforcement for reinforced 212.80 CUM 4008.81

concrete work in Bases of Flooring and the like and Mass

concrete. For PCC

Providing laying Controled Reinforced cement concrete M-

using minimum Cement content @ 450 kg/Cmt including

curing etc complete including the cost of form work but

excluding cost of reinforcement for reinforced concrete work

in concrete road Coarse and fine aggregate confirming to

IS:383 maximum size of coarse aggregate not exceeding

mm, using mechanical weigh batcher, mixed as per approved

mix design, laid, placed & distributed with sufficient man

power using M.S. Side Rail of road thickness with necessary

ANNUAL RATE OF BMC ROAD

8.00 nut bolt plates, fixing as per width, compacted with Poker 132.00 CUM 5500.00

vibrator V.D. system ( Trimix ) & Surface Plate Vibrator,

Troweling to be carried out with the same machine running

on troweling blades, finished in a continuous operation

including provision of contraction, expansion, construction

and longitudinal joints, joint filler separation membrane,

sealant primer, joint sealant debonding strip, dowel bar, tie

rod, Surface Hardner must be spread on final concrete surface

to harden the top surface, admixtures as approved, curing

compound, finishing to lines and grades including form work.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

9.00 RATE ANALYSIS-1 227.70 CUM 4519.00

the cost of reinforcement for reinforced concrete work in :

(a) Foundations, footings Bases of columns and raft slab

Providing and laying controlled cement concrete M-200 for

R&B SOR 2024-25 Item no.

10.00 R.C.C. bored piles including ramming, vibrating, curing and 21.69 CUM 4639.10

finishing complete.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

11.00 RATE ANALYSIS-2 the cost of reinforcement for reinforced concrete work in 61.87 CUM 8353.00

Columns, pillars, posts and struts for columns UP TO GROUND

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

12.00 RATE ANALYSIS-2 67.70 CUM 8353.00

the cost of reinforcement for reinforced concrete work in

Columns, pillars, posts and struts for FIRST FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

13.00 RATE ANALYSIS-2 48.03 CUM 8353.00

the cost of reinforcement for reinforced concrete work in

Columns, pillars, posts and struts for SECOND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

14.00 RATE ANALYSIS-2 the cost of reinforcement for reinforced concrete work in 61.09 CUM 8353.00

Columns, pillars, posts and struts for THIRD AND TERRACE

FLOOR UP TO CABIN TOP all floor above floor two level

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

15.00 RATE ANALYSIS-3 71.37 CUM 6523.00

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For GROUND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

16.00 RATE ANALYSIS-3 63.96 CUM 6523.00

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For FIRST FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

17.00 RATE ANALYSIS-3 74.23 CUM 6523.00

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For SECOND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

18.00 RATE ANALYSIS-3 69.13 CUM 6523.00

Beams, girders and cantilever up to floor For THIRD FLOOR

AND TERRACE FLOOR UP TO CABIN TOP all floor above floor

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

19.00 RATE ANALYSIS-4 16.68 CUM 7267.00

the cost of reinforcement for reinforced concrete work in

COPING/LINTEL FOR ALL FLOOR ABOVE FLOOR TWO LEVEL

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

20.00 RATE ANALYSIS-4 excluding the cost of reinforcement etc complete in 82.91 CUM 7267.00

R.C.C.slabs for all thickness for up to ABOVE FLOOR TWO

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

21.00 RATE ANALYSIS-4 excluding the cost of reinforcement etc complete in 79.20 CUM 7267.00

R.C.C.slabs for all thickness for up to ABOVE FLOOR TWO

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

22.00 RATE ANALYSIS-4 excluding the cost of reinforcement etc complete in 76.73 CUM 7267.00

R.C.C.slabs for all thickness for up to ABOVE FLOOR TWO

LEVEL FOR TF AND STAIR CABIN TOP FOR ALL.

REINFORCED CEMENT CONCRETE: Providing and laying

machine mixed, machine vibrated, watertight controlled

reinforced cement concrete M-250 grade. Using 20 mm and

smaller size machine crushed black trap metal aggregate (of

approved size) and well sieved silt-free river sand in all types

and size of structures as shown in drawings including water

stopper between RCC wall, watering placing (pouring),

23.00 RATE ANALYSIS-5 58.59 CUM 10114.00

necessary scaffolding, hoisting, leaving pockets for pipe

flanges, sockets etc.as directed and keeping drip moulds,

grooves, including curing, testing, haking, as per direction

complete. Note: (1) RATES OF REINFORCED CEMENT

CONCRETE WORK SHALL BE INCLUSIVE OF SHUTTERING,

CENTERING BUT EXCLUSIVE OF STEEL REINFORCEMENT FOR

VERTICAL FINN/RCC PADDI.

Providing and laying controlled cement concrete M.250

R&B SOR 2024-25 Item No. exposed work with curing etc. complete including the

05034B2 cost of formwork but excluding the cost of reinforcement

for R.C.C. work in ELEVATION VARTICAL COLUMN/FINN

Providing TMT Bar FE 500 D/500 CRS STEEL reinforcement for

R&B SOR 2024-25 Item No.

25.00 R.C.C. work including bending, binding and placing in position 86797.97 KG 72.92

complete upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

R&B SOR 2024-25 Item No.

26.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 239.68 CUM 4521.82

Conventional for ground floor (BRICK MASONARY) FOR

PLINTH AND GF LEVEL

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

R&B SOR 2024-25 Item No.

27.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 85.66 CUM 4521.82

Conventional for FIRST floor (BRICK MASONARY) FOR F.F

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

R&B SOR 2024-25 Item No.

28.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 85.66 CUM 4521.82

Conventional for SECOND floor (BRICK MASONARY) FOR S.F

Brick work using common burnt clay building bricks having

R&B SOR 2024-25 Item No. crushing strength not less than 35 kg./Sq.Cm. in foundation

06002AA and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B)

Conventional for THIRD & TERRACE floor U

Half brick masonry in common brunt clay building strength

not less than 35 Kg./Sqcm. In cement mortar 1:3 (1cement :

R&B SOR 2024-25 Item No.

30.00 coarse sand) with 2 Nos. of 6 mm. Diameter mild steel round 194.98 SQM 697.17

bars after every three coarse embedded in cement mortar for

all floor up to floor two level

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

R&B SOR 2024-25 Item No. upto floor two level and finished even and smooth in (i)

17002A+17006 Cement mortar 1:3 (1-cement:3-sand)finished with trowel

including scaffolding curing etc. comp.For all floor above floor

two level ceilings & soffits of stairs

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

R&B SOR 2024-25 Item No. upto floor two level and finished even and smooth in (i)

17002A Cement mortar 1:3 (1- Cement:3- sand) finished with trowel

including scaffolding curing etc. comp.For all floor above floor

two level walls

20 mm thick sand faced cement plaster for OUT SIDE on walls

R&B SOR 2024-25 Item No. up to height 12 metres above ground level consisting of 8 mm

17009 thick backing coat of C.M. 1:1 (1-Cement : 1-sand) etc.

Providing, supplying and fixing Natural Brick Cladding tiles of

size approximately 60 × 215 mm and thickness 15 mm, made

of concrete, in natural finish, on internal or external vertical

wall surfaces, including preparation of base surface by

cleaning, removal of loose particles, dust, oil and grease,

fixing the tiles using approved cementitious / polymer-

modified tile adhesive suitable for vertical applications,

maintaining proper line, level and alignment, providing

34.00 RATE ANALYSIS-6 1058.84 SQM 3000.00

uniform joints and pointing the same with matching grout,

including cutting, shaping, finishing at edges, corners,

openings, scaffolding, tools, labour and all incidental works,

complete in all respects as per manufacturer’s specifications,

drawings and directions of Engineer-in-Charge.

Natural Brick Cladding Code 15640 – 60×215 mm, concrete,

mm thick by MyTyles, or equivalent approved make

Providing and fixing full-height office partition from finished

floor level up to false ceiling / slab, partly opaque and partly

glazed, using 50 mm × 50 mm aluminium hollow box section

framework (minimum 2.0 mm thick) fixed to floor, ceiling and

walls, cladding opaque portions on both sides with 12 mm

thick MR grade plywood conforming to IS 303 of approved

make such as Greenply / Century / Kitply or equivalent,

finished with 1.0 mm thick decorative laminate conforming to

IS 2046 of approved make such as Merino / Greenlam / Royale

Touche or equivalent, providing 19 mm thick seasoned

35.00 RATE ANALYSIS-7 667.23 SQM 7069.00

wooden border finished with melamine polish at all exposed

edges, corners, junctions and door frames, fixing 10–12 mm

thick toughened glass conforming to IS 2553 of approved

make such as Saint-Gobain / AIS / Modiguard or equivalent in

aluminium glazing channels with EPDM gaskets and silicone

sealant, including provision for door openings, service cut-

outs, all labour, materials, tools, scaffolding and incidentals,

complete as per drawings and directions of Engineer-in-

Charge.all door inside use floor spring and all assesarary. no

extra payment for door inside use floor spring and all asseary.

GRID FALSE CEILING :- P&F Perforated ceiling 600 x 600 mm

with grid section (24/15mm) with semi recessed / micro look

joints, NRC : 0.9, Fire resistance : Class-A, as per design, with

36.00 RATE ANALYSIS-8 50 mm. rockwool, inclusive of fixing, labour and all other 1428.06 SQM 1697.00

required acessories etc complete as per the company

specifications and guidelines (ECOTONE / GYPROC /

Finishing wall with 100% weather proof EXTERIOR paint of

approved make,brand and shade on wall surfaces (two coats),

with 100% damp proof primer one coats , recessed

/embossed panels, pillars etc., give an even shade after

37.00 RATE ANALYSIS-9 1201.66 SQM 216.00

throughly brushing the surface to remove all the dirt and

remains of loose powdered material. The material shall be as

described in list of approved material.shade and pattern as

design by architect and directed by EIC.

Providing and laying 18-20mm average thick river polished

Granite stone slab flooring & stair trade riser with cement

mortar1:3 (1cement:3coarsesand) laid over and jointed with

38.00 RATE ANALYSIS-10 grey / white cement slurry with matching color of stone 99.92 SQM 2497.00

including half round nosing, rubbing and polishing etc.

complete. shade and pattern as directed by

Architect/enginner in charge.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

R&B SOR 2024-25 Item 24'' in flooring treads of steps and landing laid on a bed of

No.14008CA 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

R&B SOR 2024-25 Item 24'' in skrting risers of steps and dedo on 10mm thick cement

No.14009CA plaster 1:3 (1-cement: 3-coarse sand) and jointed with white

Providing and laying 60 cm x 120 cm Antiskid Vitrified 8 mm

thick tiles flooring over over 20 mm (average) base of cement

mortar 1:6(1cement : 6 coarse sand) on new surfrace jointed

R&B SOR 24-25 Item No with colour cement slurry including finishing with flush

14021A pointing and cleaning the surface etc complete shade and

pattern as approved by Architect and

EIC.Asian,Simpollo,Johanson, Swastik & Rak (Premium First

Quality) FOR ALL FLOOR

Providing and laying Ceramic tiles 60*120 6 mm. Thick in

kitchen,toilet and dado on 10 mm. Thick cement plaster 1:3 (1

R&B SOR 2024-25 Item No cement : 3 coarse sand) pointing in white cleaned jointed with

14009A BNo.21/14.32(B) white cement slurry. size, shade and pattern as approved

(matched to flooring) for all floor WALL as design by architect

and directed by EIC

Brick bat waterproofing treatment 100mm average thick in

43.00 RATE ANALYSIS-11 CM 1:3 with smooth surface finish and required slop etc, 480.98 SQM 554.00

complete as directed by Architect/Engineer

Providing and laying broken coloured chine mosaic

flooring/Wall Cladding for landscape area fountain storage

using 12 mm to 25 mm broken pieces of colourfull glazed

R&B SOR 2024-25 Item No tiles to be laid over cement mortar 1:3 to plain or slope and

14036 to be tempered to bring mortar creme out upto surface

using white/colour cement/grout including rounding off

junctions and extending them upto wall,clearing with water

and oxalic acid etc. as directed.

WATER PROOF PLASTER: Providing 15 mm thick water proof

cement plaster with first coat of cement mortar 1:4 (1 -

cement : 4 - sand) and over a first coat finishing and

floating coat of neat cement paste mixed with integrated

45.00 RATE ANALYSIS-12 water proofing compound in proportion mentioned by 175.40 SQM 241.00

manufacture including necessary scaffolding, curing etc.

complete for all floors.(NOTE: This plaster is to be applied in

toilet block floors, chhajja tops, underground water tanks

etc.) To be measured in SQ.MTS.

Providing and Fixing Tensile roof sheets are lightweight,

high-strength fabric membranes (like PVC-coated

polyester, PTFE, or ETFE) stretched over a support structure

46.00 RATE ANALYSIS-13 (cables, steel) to create large, often column-free, curved 29.70 SQM 7794.00

roofs, offering dynamic design, natural light, and weather

protection for public spaces,including all fitting labour etc,

complete as directed by Architect/Engineer

Applying two coats of Birla (white cement based) or Asian

(acrylic lapy- putty) or equivalent & two coats of primer of

R&B SOR 2024-25 Item No. approved brand and manufacture on new wall/ceiling surface

19032 to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting ( three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

R&B SOR 2024-25 Item No. surface to give an even shade including throughly brushing

18.57+18.59 the surface free from mortar droppings and other foreign

matter and sand papered smooth. on walls shade and pattern

as design by architect and directed by EIC.

TOP SOIL: Supplying and spreading in position 150mm thk

layer of good approved redsieved soil including levelling,

watering, consolidation by manually or mechanically(which

49.00 RATE ANALYSIS-14 ever convenient at site) at every 50mm thik layers, cost 49.34 CUM 368.00

including of allmaterials, labour and other charges required to

complete and as directed by the

Engineer In charge

Providing, supplying, laying and planting like

champa,kadam etc trees suggested area with necessary

50.00 RATE ANALYSIS-15 garden soil required for trees, curing, requiredmanure, for 18.00 EACH 2505.00

soil bed etc. complete at all level, between 7 ft to 9 ft

heights as design and directed by ARCHITECT.

Providing, supplying, laying and planting different kinds of

plants, shrubs and lawnsareain suggested area with necessary

51.00 RATE ANALYSIS-16 garden soil required for plants, curing, requiredmanure, 58.25 EACH 793.00

forflower bed etc. complete at all level, heights as design and

directed by ARCHITECT.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,45cm height and

52.00 RATE ANALYSIS-17 15cm thick of M250 grade concret as per approved design and 27.50 RMT 264.00

including excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing S.W. gully trap with C.I. grating brick

SOR 2024-25 Item No. masonry chamber and water tight C.I.Cover with frame of

24006AA mm x 300 mm size (inside) with standard weight. 100 m x

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35 kg. Cm² in C.M. 1:5 C.I. cover with

frame (Light duty) 455 mm x 610 mm internal dimensions,

total weight of cover with frame to be not less than 38 kg.(Wt.

of cover 23 Kg.) and (Wt. of frame 15 Kg.) R.C.C. top slab with

R&B SOR 2024-25 Item No.

54.00 1:2:4 mix (1-cement :2-coarse sand : 4- graded stone 5.00 EACH 2903.89

aggregate 20 mm size) foundation concrete 1 :5 :10 inside

plaster 15 mm thick with cement mortar 1 :3 finished smooth

with a floating coat of neat cement on walls and bed concrete

(A) Inside dimensions 500 mm x 700 mm and 450 mm deep for

pipe line with one or two inlets.

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per the

type design in brick masonary in C. M. 1:3 ,inside and outside

lastering in C. M. 1:3 necessary coping in R.C.C.M. 200 fixing C.

I. steps and fixing manhole frame and covers (But excluding

supply of manhole frame and covers) over manholes and

GWSSB 2022-23 Section 2.D- house connection chambers and fixing Manhole covers (but

C& M - Item No. 2 - (a-1) excluding supplying of manhole covers) over scraper manhole

etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type desing complete

(excl. excavation). Manhole type "A" circular type having

inside diameter of minimum 1200 mm and for depth from 0 M

to 1.50 M (for 150 mm to 500 mm dia sewers). Manhole type

"A" as above but up to 1.0 M depth.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

56.00 R&B SOR-24-25, 10030C cm x 7 cm. size including anodized alluminium fixtures and 122.41 SQM 5285.45

fastenings including primer coat of approved quality and

coats of oil painting etc, complete. (ii) Fully Panelled.

Appliying priming coat over new wood and wood based

surface after and including preparing the surface by

57.00 ch-19, i.c-19009b throughly cleaning oil, grease, dirt and other foreign 306.02 SQM 44.20

matter, sand papering and knotting. (B) Ready mixed

paint brushing wood primier pink.

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to give

58.00 ch-19, i.c-19002, p.g. 131 an even shade including cleaning the surface of all dirt, 306.02 SQM 95.00

dust and other foreign matter sand papering and

Providing and fixing window & tofen window frame of

alluminium casement window Z series r40 with 5mm

toufened glass & epdm gasket with all standard accessary

full-height as per drawing from finished floor level up to

false ceiling / slab, aluminium hollow box section

framework (minimum 2.0 mm thick) fixed to floor, ceiling

and walls, corners, junctions and frames, fixing 5 mm thick

59.00 RATE ANALYSIS-18 229.26 SQM 7734.00

toughened glass conforming to IS 2553 of approved make

such as Saint-Gobain / AIS / Modiguard or equivalent in

aluminium glazing channels with EPDM gaskets and

silicone sealant, including provision for window openings,

service , all labour, materials, tools, scaffolding and

incidentals, complete as per drawings and directions of

Engineer-in-Charge.

Providing and fixing OVAL TYPE GLASS GLAZING window &

tofen window frame of alluminium casement window Z

series r40 with 5mm toufened glass with all standard

accessary full-height as per drawing from finished floor

level up to false ceiling / slab, aluminium hollow box

section framework (minimum 2.0 mm thick) fixed to floor,

60.00 RATE ANALYSIS-19 ceiling and walls, corners, junctions and frames, fixing 5 126.90 SQM 5156.00

mm thick toughened glass conforming to IS 2553 of

approved make such as Saint-Gobain / AIS / Modiguard or

equivalent in aluminium and silicone sealant, including

provision for fix window , service , all labour, materials,

tools, scaffolding and incidentals, complete as per

drawings and directions of Engineer-in-Charge.

Providing, supplying, fabricating and placing two-seater

sofa of approved design and finish, having approximate

size 1.20 m length × 0.55 m depth, with seating height

about 0.40 m and overall height about 0.75 m. Internal

frame made of seasoned hardwood members and 18 mm

thick IS 303 grade MR plywood for seat, back and arm

support. Seat and back cushions made of standard density

61.00 RATE ANALYSIS-20 8.00 each 18882.00

polyurethane (U-foam). Sofa upholstered with rexine /

artificial leather upholstery fabric of approved shade and

texture, neatly stitched and finished. Sofa mounted on

metal / SS legs, including all materials, foam, upholstery,

stitching, adhesives, labour, transportation and placing at

site, complete as per approved drawings and directions of

Engineer-in-Charge.

Providing, supplying, fabricating and installing storage

cupboard of size 1.20 m (W) × 0.50 m (D) × 2.10 m (H),

manufactured from 18 mm thick IS 303 grade MR plywood

of approved make Euro / Greenply / SRG or equivalent.

External surfaces including shutters finished with 1.0 mm

thick decorative laminate of approved make, internal

surfaces finished with 0.8 mm thick white laminate. All

62.00 RATE ANALYSIS-21 exposed edges finished with seasoned hardwood edge 32.00 each 43098.00

lipping with melamine polish. Cupboard provided with

adjustable internal shelves, full height shutters with locking

arrangement, hinges, handles and necessary premium

hardware. Cupboard mounted on 75 mm high legs,

including all materials, hardware, cutting, assembling,

polishing, transportation and fixing at site, complete as per

drawings and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing office table

with side table (credenza) of approved design and finish,

comprising main table of size 1.80 m × 0.75 m × 0.80 m

height and side table of size 1.20 m × 0.45 m × 0.65 m

height, manufactured from 18 mm thick IS 303 grade MR

plywood. Table top, panels and structural members shall

be made of MR plywood and finished with 1.0 mm thick

decorative laminate of approved shade and make like,

Greenlam, Merino, Centurylam Etc. All exposed edges

63.00 RATE ANALYSIS-22 shall be provided with seasoned hardwood edge lipping, 12.00 each 35207.00

neatly rounded and finished with melamine polish. Side

table shall be provided with drawers / storage units

mounted on heavy-duty telescopic drawer channels of

Suzu / Hettich / equivalent approved make. Including all

necessary hardware such as drawer channels, hinges,

handles, locks, screws, adhesives, cutting, assembling,

polishing, finishing, transportation, loading, unloading and

fixing at site, complete in all respects as per approved

drawings and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing single-

seater workstation table with glass partition, of approved

design and finish, comprising table of size 1.20 m × 1.20 m,

manufactured from 18 mm thick IS 303 grade MR plywood

of approved make Euro / Greenply / SRG or equivalent,

finished with 1.0 mm thick decorative laminate of

approved shade and make like, Greenlam, Merino,

Centurylam Etc. All exposed edges finished with seasoned

hardwood edge lipping with melamine polish. Providing

one pedestal with three drawers mounted on heavy-duty

64.00 RATE ANALYSIS-23 10.00 each 24069.00

telescopic drawer channels of Suzu / Hettich / equivalent

approved make, drawer fronts laminated and internal

surfaces finished with 0.8 mm thick white laminate.

Providing and fixing glass partition mounted in wooden

frame made of MR plywood, with 10–12 mm thick

toughened clear / frosted glass fixed with gaskets and

sealant, complete including all hardware, fittings,

adhesives, cutting, assembling, polishing, transportation

and fixing at site, complete as per drawings and directions

of Engineer-in-Charge.

Providing, supplying, fabricating and installing executive

table with back cupboard of approved design and finish,

complete in all respects as per drawings and directions of

Engineer-in-Charge. Front table of size 2.40 m (L) × 0.60 m

(W) with standard working height, made of 18 mm thick IS

303 grade MR plywood of approved make Euro / Greenply

/ SRG or equivalent, finished with 1.0 mm thick decorative

laminate of approved make Merino / Greenlam /

CenturyLam or equivalent. All exposed edges finished with

seasoned hardwood edge lipping with melamine polish.

Front table provided with four drawers mounted on heavy-

duty telescopic drawer channels of Suzu / Hettich or

65.00 RATE ANALYSIS-24 11.00 each 45174.00

equivalent, drawer internal surfaces finished with 0.8 mm

thick white laminate. Providing and fixing stainless steel leg

rest rod / pipe neatly finished and firmly fixed. Back

cupboard of size 1.50 m (L) × 0.55 m (D) × 0.90 m (H) made

of 18 mm IS 303 grade MR plywood, externally finished with

1.0 mm thick decorative laminate and internally finished

with 0.8 mm thick white laminate, provided with shutters,

internal shelves suitable for file storage and locking

arrangement, including all hardware, fittings, cutting,

assembling, polishing, transportation and fixing at site,

complete as per drawings and directions of Engineer-in-

High back chair with Swivel tile mechanism (revolving,

back height more than 24") 5 leg revolving fabricated

stand to be made from 40 x 20 x 16 CRC powder coated

66.00 RATE ANALYSIS-25 15.00 each 14410.00

sections, excell P.P. Cushion Arm , Gas Lift nylone Base

Leatherite fapestry as per selection of EIC ( Greeken

Modal no. 224 A)

Medium back chair with Swivel tile mechanism (revolving,

back height more than 24") 5 leg revolving fabricated

stand to be made from 40 x 20 x 16 CRC powder coated

67.00 RATE ANALYSIS-26 35.00 each 13551.00

sections, excell P.P. Cushion Arm , Gas Lift nylone Base

Leatherite fapestry as per selection of EIC ( Greeken

Modal no. 225 A)

Visitor's Chair (Non-Revolving, back height 17") fabricated

pipe stand CRC powder coated sections, excell P.P.

68.00 RATE ANALYSIS-27 40.00 each 11491.00

Cushion Arm , Leatherite fapestry as per selection of EIC (

Greeken Modal no. 226 A)

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt

with colour anodized alluminium frame as details etc

complete for Fix window/gap/elevation.all fitting material

& labour including fixing as per detail given and as

directed by architect/engineer in charge.

Providing and fixing2mm Aluminium / 4mmACP sheeting

fixed with Type-4 Class-B High Intensity Grade Sheeting as

70.00 M1048 per IRC 67 : 2012 reflective sheeting for wall top &edge 51.48 sqm 3955.08

fitting with epoxy joint & including fitting material & labour

Providing,Making, Fabricating, Eracting with Fixing M.S.

Fabricated Structure as per design, , m.s flat , M.S.box

pipe, M.S. round dia pipe M.S.Hollow Pipe top cover as per

design (square/round), M.S. polished square and round

shape as per design,MS angle & GI Concertina coil wire for

71.00 RATE ANALYSIS-28 12380.08 kg 144.00

fencing, M.S Polished flat with making required size hole at

required spacing as design by architect and directed by

EIC.and hold fast with coach bolts & required fitting

including all as per drawing etc. complete.as design by

architect and directed by ARCHITECT.

Providing, supplying, fabricating, transporting and installing

portable prefabricated café container of size 20’-0” × 10’-

0” × 8’-0”, made of structural steel tubular framework with

MS corrugated sheet walls, MS plain sheet roof, Bison panel

flooring with vinyl mat finish, glass wool insulation, internal

MDF pre-laminated wall paneling, MS corrugated main

72.00 RATE ANALYSIS-29 door with internal hylaminated finish, aluminium sliding 1.00 each 299750.00

windows with MS safety grills, complete internal interior &

furinture for use to for cafe area with electrical wiring with

Havells make fittings including light points, fan points, plug

points, MCB and MCB box, and external painting with

Asian Paints Rust Shield, complete in all respects as per

specifications and direction of Engineer-in-Charge.

Applying priming coat over new steel and other metal

surfaces after and including preparing the surface by

thoroughly cleaning, oil grease, dirt and other foreign

matter and scoured with brushes fine steel wool, scrapers,

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on new

steel and other metal surfaces with enamel paint,

74.00 ch-19, i.c-19002, p.g. 131 brushing interior to give an even shade including 1033.04 SQM 93.46

cleaning the surface of all dirt, dust and other foreign

Providing and fixing C.P.V.C. water supply pipes schedule

pipes confirming to ASTM F-441 for hot as well as cold water

supply with necessary fitting like Tee, Elbows, Union, coupler,

R&B SOR 2024-25 Item No. etc. in walls as well as floors concealed in walls and finishing

23055 the wall with cement mortar to give each finish of brands like

Astrl or Finolex. Complete with necessary scaffolding at all

(A) 15 mm Ø C.P.V.C. pipes.

76.00 -Do- (B) 25 mm Ø C.P.V.C. pipes. 150.00 RMT 251.31

R&B SOR 24-252024-25 Item

77.00 -Do- (C) 32 mm Ø C.P.V.C. pipes. 100.00 RMT 334.89

R&B SOR 24-25 2024-25 Item

78.00 -Do- (D) 40 mm Ø C.P.V.C. pipes. 100.00 RMT 443.29

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

R&B SOR 24-25 2024-25 Item

79.00 Foundation (NSF) seal for potable water of following dia. 200.00 RMT 654.04

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc.complete. [F] 50mm.

Providing and fixing in position C.P.V.C. Ball valve confirming

80.00 RATE ANALYSIS-30 to ASTM F-441 to water supply line. (A) 25mm Ø C.P.V.C. Ball 20.00 EACH 481.00

81.00 RATE ANALYSIS-31 -Do- (B) 32 mm Ø C.P.V.C. Ball valve. 5.00 EACH 539.00

82.00 RATE ANALYSIS-32 -Do- (C) 40 mm Ø C.P.V.C. Ball valve. 5.00 EACH 597.00

Providing and laying to level and slope` under ground

83.00 RATE ANALYSIS-33 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 60.00 RMT 390.00

outer and inner solid P.V.C. (A) 110 mm Ø 3.2 mm thick.

Providing and laying to level and slope` under ground

84.00 RATE ANALYSIS-34 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 70.00 RMT 579.00

outer and inner solid P.V.C. (B) 160 mm Ø 4.7 mm thick.

Providing and laying to level and slope` under ground

85.00 RATE ANALYSIS-35 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 25.00 RMT 730.00

outer and inner solid P.V.C. (C) 200 mm Ø 4.7 mm thick.

PProviding and fixing washbasin with single hole for pillartap

with C.I. or M.S. brackets painted white includingsutting holes

86.00 ch23018 and making good the same but excluding fittings.(A) Vitreous 15.00 EACH 1505.90

China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour

Providing and fixing C.P. Pillar cock 15 mm Heavy duty swan

neck with flange and wall flange of make like Jaguar, ESS ESS,

Cera (to be provided for water tubes in no.) C.P. Pillar cock

mm Heavy duty swan neck

Providing and fixing Urinal of approved quality

includingconnection with trap and with integral

longitudinal flush pipe complete set (unit) including

connecting the whole unit with water supply and

drainage.(in nos.) .(A) Squating plate pattern white

earthenware 550mm x 300mm.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1- fine sand)

89.00 ch23010 (A) vitreous China Pattern :(i) in white colour (all C.P. fitting of 18.00 EACH 1343.38

approved brand like Jaguar, ESS ESS or Cera) complete set

(unit) including connecting the whole unit with water supply

and drainage.(in nos.)

Providing and fixing chromium plated brass half trun

90.00 ch23032b flushcock of approved quality including fixing in pipe line 18.00 EACH 261.16

etc.complete.(ii) 25mm dia

Providing and fixing self closing press matic bib cock with

91.00 RATE ANALYSIS-36 flange and wall flange of make like Jaguar, ESS ESS, Cera (to be 18.00 EACH 1584.00

provided for water tubes in no.)

OVER HEAD PVC WATER TANK : Supplying, lifting and

installing in position, PVC water tank 'EURO' or equivalent

having cross section of tank wall having outer coloured layer,

R&B SOR 24-252024-25 Item U.V resistant layer, insulating layer and anti bacterial inner

No. 22104 layer. Cost including transporting, labour and making

necessary connection for inlet, outlet, linkage, overflow, wash-

out, etc.with required platform etc. as directed by engineer in

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

R&B SOR 24-252024-25 Item

93.00 screaed down or higned grating including cost of cutting and 36.00 EACH 645.09

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

Applying Anti corrosve Chemical treatment Food Grade epoxy

gwssb sor 22-23,item no 6,pg- for water retaining structure including cleaning the surface

65 thoroughly & making surface dry. Even & smooth for applying

treatment and coats.DCL1400 with 3 years Guarantee.

Providing and applying a protective and waterproofing

coating of approved quality [Bituminous Paint/Bitumen

Emulsion/Bituminous Mastic] conforming to IS: 158 (or

95.00 RATE ANALYSIS-37 relevant IS code) on the external surface of the Reinforced 218.00 sqm 189.00

Cement Concrete (RCC) water tank, including all necessary

surface preparation, cleaning, and application of two or more

coats as specified by the engineer-in-charge, complete

96.00 JCB machine rental work at the site of excavation or cleaning 16.00 hour 1400.00

rate.item.no.96

Supply, Installation, Testing and Commissioning of

Electric driven fire pump suitable for

automatic/manual operation and consisting of

following: complete in all respect as required.

a) Monoblock pump & DIESEL PUMP SET to ensure a

97.00 MARKET RATE 1.00 NO 716000.00

minimum pressure of 3.5 kg / sq.cm. at highest and

farthest outlet at specified flow of 1620 Lpm at 60 m.

head conforming to IS standards B) 180 LPM

JOKEY PUMP (3 NO PUMP TOTAL)MAKE-

Supplying, Installation, Testing and Commissioning of

Control Panel suitable for automatic/manual operation of

fire fighting pumps consisting

(a) Necessary cabling, wiring, earthing from panel to

98.00 MARKET RATE individual equipment shall be included in the quoted price. 1.00 Set 38000.00

(b) Facility for more selections i.e auto or manual.

(c) Protection failure and control cabling.

(d) interlocking of pressure switch with pumps

(e) soft starterMAKE-L&T

Supply, Installation, Testing and Commissioning of 150 mm

dia Pressure Gauge of range 0 - 16 Kg / cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast

aluminium, stove enameled, black, weather proof case with

99.00 MARKET RATE outer, screwed aluminium bezel and complete with necessary 1.00 No. 1250.00

U-type stainless steel siphon tube and cock including

providing suitably painted angle iron support to the

tube etc.as per specification

complete as required. MAKE-H.GURU

Supply, Installation, Testing and Commissioning of the

following sizes of flange jointed / screwed / welded, G I Pipes

of Class C (Hevy class) ISI marked including accessories such as

MS bracket, U clamps with Anchor fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc., and laying

100.00 MARKET RATE 8.00 Rmt. 2150.00

on the surface including painting with one coats of

anticorrosive primer and one coats of approved red enamel

paint after laying and testing after Installation etc. as per

specifications complete as required. a) 150 mm dia.MAKE-

ASIAN/JINDAL/SURYA

101.00 MARKET RATE b) 100 mm dia 74.00 Rmt. 1850.00

102.00 MARKET RATE c) 80 mm dia 12.00 Rmt. 1250.00

103.00 MARKET RATE d) 50 mm dia 5.00 Rmt. 856.00

104.00 MARKET RATE e) 32mm dia 2.00 Rmt. 600.00

105.00 MARKET RATE f) 25 mm dia 6.00 Rmt. 360.00

Supply, installation, testing and commissioning of C.I.

Butterfly valve (PN 1.6) with

106.00 MARKET RATE 5.00 Nos. 3800.00

flanges, nut bolts, gaskets complete as required.(A ) 100 mm

dia MAKE- SANT/L.P./ISI

Supply, Installation, Testing and Commissioning of NON

107.00 MARKET RATE RETURN VALVE. NRV 3.00 Nos. 4200.00

Supply, installation, testing and commissioning Single

Headed Fire Hydrant Valve with 80 mm N.B. flanged inlet,

63 mm dia female instantaneous outlet type. S.S. coupling,

108.00 MARKET RATE blank cap, chain, twist release type lug & all accessories 5.00 Nos. 4500.00

Conforming to IS:5290. Including fixing with supports, flanged

tapping from wet riser, orifice plate complete as required

by the Local Fire Authority. MAKE- ALEX/SAFEP/PROTECTO

Supply, Installation, Testing and Commissioning of Weather

proof Standard MS Fire Hose Cabinet wall mounting type (450

mm x 600 mm x 250 mm deep) having single opening with

109.00 MARKET RATE necessary locking arrangement by allan key suitable for 5.00 Nos. 1500.00

housing 1 no. hose pipe,

1no. Branch pipe & nozzle spanner. MAKE-

ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning non-

percolating rubber reinforced lined fire Hose pipe (as per IS :

636) of 63 mm dia and 15 mtrs long. The hose shall be rated

for burst pressure of 35.7 Kg/sqcm. Hose shall be

110.00 MARKET RATE 5.00 Nos. 4100.00

complete with ISI marked SS male & female coupling

(IS:903) bound & riveted to hose pipe with SS rivets & 1.5 mm

SS wire.MAKE- ALEX/SAFEP/PROTECTO

( RATE 1 NOS HOSE PIPE)

Supply, Installation, Testing and commissioning of 63 mm dia

instantaneous pattern COM SS short branch pipe, 20 mm

111.00 MARKET RATE dia nozzle conforming to IS 903, suitable for inter 5.00 Nos. 1200.00

connection to hose pipe coupling complete as required by

the Local Fire Authority. .MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of First Aid

Hose Reel equipment conforming to IS:884 comprising of hose

reel drum, 8 mm shut off nozzle, Rubber hose reel tubing as

112.00 MARKET RATE per IS: 444 of 25 mm dia x 30 mtr. long, painting, Manual fix 5.00 Nos. 4300.00

type with fixing bracket, anchor fastener, bolts & nuts etc.

complete as required by Local Fire

Authority.MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of SS Ball

113.00 MARKET RATE Valve. 6.00 Nos. 680.00

a) 25mm dia.MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of Cast lron

Two Way Fire Brigade Inlet as per IS: 904 having 63 mm dia

114.00 MARKET RATE inlet with blank cap and chain with necessary fittings, 1.00 No. 4500.00

flanges, nut bolts etc. complete as required. .MAKE-

Supply, Installation, Testing and Commissioning of Gun Metal

115.00 MARKET RATE Air Release Valve with 1.00 Nos. 1400.00

necessary fittings. Size: 25 mm (For Riser) .MAKE- SANT

Supply, installation, testing and commissioning of

116.00 MARKET RATE PRESSURE switches to each internal 3.00 Nos. 3200.00

hydrant valve with required accessories. .MAKE- ISI

Supply, installation, testing and commissioning of XLPE

insulated copper Cable from each switches to Panel with all

117.00 MARKET RATE 510.00 Mtrs. 125.00

necessary accessories.

Providing and fixing of Manual Fire Alarm system as

per requirement and specification consisting of

118.00 MARKET RATE 5.00 Nos. 800.00

following items

a) Manual call point (FR-Polymer)MAKE- ASES/AGNI

119.00 MARKET RATE b) Hooters (FR-Polymer)MAKE- AGNI 5.00 Nos. 800.00

c) Cable & other accessories: C XLPE insulated

120.00 MARKET RATE 25.00 Mtrs. 150.00

copper MAKE- ISI

121.00 MARKET RATE d) Manual Fire Alarm Panel 8 ZONE MAKE-ASES/AGNI 1.00 Nos. 6500.00

Supply, installation, testing and commissioning of Carbon

Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to

122.00 MARKET RATE IS:15683, with ISI marked / TAC approved fitted with 5.00 Nos. 5100.00

required accessories including wall suspension brackets. MAKE-

Supply, installation, testing and commissioning of ABC type

kg confirm to IS:15683,

123.00 MARKET RATE 5.00 Nos. 1800.00

with ISI marked / TAC approved fitted with required

accessories including wall suspension brackets. MAKE- ISI

124.00 MARKET RATE FSPA AND NOC CHARGE MAKE- ISI 1.00 Nos. 35000.00

125.00 MARKET RATE SMOKE DETECTOR MAKE- ISI 43.00 Nos. 1150.00

"Supplying, Erecting, Testing & Commissioning the passenger

lift having following main features:

4/5/6 Passengers, Ground plus 2 upper floor with Rated

Speed of 1.0 m/sec,

126.00 QUATATION (A) With General Specification attached herewith. Cat.II 1.00 EACH 1166600.00

NOTE: Before Quoting Rate for this Item of Lift, beader shall

check Describption,

specifications and instructions pertaining to this Item of LIFT

in Special Terms & Conditions."

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.[II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete Cat III.

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories. Cat III.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

131 1-2-6. metallic/white front plate , modules erected with 78.00 Each 344.00

necessary connections as per site situation directed

by Engineer In charge(13) 6A/10A/16A/20A/25A/32A

Single pole Modular MCB Switch. Cat III.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Providing & laying approved make ISI marked HDPE 6Kg

/ cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

133 ch 4, i-c 4-5-8 (B). road crossing on or floor as directed for laying of cable. 300 Rmt 190.00

The pipes as following size of dia & weight per 6 mtr.(b)

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(k) 4.00Sq.mm

core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

135 ch 1, i-c 4-3-4/c. to be laid on wall with necessary clamps or in existing 200 Rmt 160.00

trench / pipe of following size of cables(C) 4 core 10 Sq.

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories(a)

wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size(A) With

medium class Rigid PVC pipe and accessories(b)

wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (a) with medium

class Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

supplying and erecting sheet steel powdercoated cable

and termination box to be mounted on top or bottom of

139 3-11-6 H the m.b.b.distribution box for housin/ covering extra wires 6 each 930.00

and cables suitable for followingsize of m.c.b. db box.

Three phase double 12way double door.

S.I.T.C. submersible pump set suitable for bore of 100 mm.

dia. or more having three phase motor capacity not more

than 5 H.P. with following capacity . Lifting and Lowering

140 RATE ANALYSIS-38 2.00 each 40310.00

taken extra. (A) (25 stage) 120 to 125 LPM discharge at

to 120 mtrs. head respectively suitable for 50 mm dia.

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

20 amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ

A.C. motor up to 7.5 HP with high voltage protection

(above 480 v) and under voltage protection (below 330 v)

141 ELE SOR -9-1-4-cat II 1.00 each 2532.00

current sensing single phasing protection. Reverse phasing

protection, inverse current characteristic overload

protection with indication for On, OL, HV,LV SPP in a single

unit with feather touch start / stop push button, high

temperature with standing Bakelite terminals complete

erected on P.W. Block with necessary connection. [Cat.II]

Supplying & erecting in earthpit of minimum bore dia.

225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic

142 3.14.10(C) value surrounded by highly conductive compound with 1.00 each 12375.00

high charge dissipation suitable for panel earthing.[A] For

electrical installation up to 440 V (c) For Electrical

Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent Earthing in normal

soil. Length of Pipe : 2.00 mtrs Back filling Compound :2

nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size. (a) 3 core 1.5 Sq. mm

147 R&B Ele SOR 25-26 1-4-3(J) -Do- 3 core 2.5 Sq. mm 50.00 RMT 101.00

148 R&B Ele SOR 25-26 1-4-3(k) -Do- 3 core 4.0 Sq. mm 50.00 RMT 139.00

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

149 R&B Ele SOR 25-26 3-12-2(iv) 415V,50Hz. having characteristic of quick action & 1.00 EACH 4272.00

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed. 100 Amps FP (100 mA Sensitivity)

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing

provision, 22 gauge copper winding, Power factor not <

0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v (tolerance

150 R&B Ele SOR 25-26 5-1-7B as per IS : 374-2019), THD < 10%, remote or electronic 40.00 EACH 3370.00

regulator unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for

to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required.[ Make

shall be approved by Engineer in Charge] B) 1200 mm

Supplying and erecting LED indoor CELLING LIGHT ULTIMA

SLIM 2' X 2' 36W RECESS MOUNT 2 X 2 PANEL Indoor

LuminaireTechnical Specifications Operating Temperature -

10℃ to 40℃ Rated Input Voltage & Frequency 230 VAC,

50Hz Rated Input Wattage 36W ± 10% Rated Input Current

0.165 Amp (Nominal)

Power Factor ≥0.90 ATHD <10% Rated Luminous Flux

lm / 3780 lm / 3600 lm (tolerance as per BIS) Rated

Luminaire Efficacy 110 lm/W / 105 lm/W / 100 lm/W

(tolerance as per BIS) Correlated Color Temperature (CCT)

6500 K / 4000 K / 3000 K (tolerance as per ANSI)

Color Rendering Index (CRI) >80 Ra Beam Angle 120°

(within the permissible limits) Driver Efficiency ≥85%

LED Life Span >50000 Hrs (Ta=25℃ @L70) Housing CRCA

Housing with White Powder Coating Lens / Reflector PC

Diffuser Mounting Recess etc complate.make-jaquar

EDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

152 R&B Ele SOR 25-26 2-15-3(A)iii Luminaire efficacy> 85 lumens/watt , 70.00 EACH 688.00

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20(iii) 16-20

watts, Surge-2 KV cat.iii

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

153 R&B Ele SOR 2-15-1(A)v 20.00 EACH 624.00

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet cat III

(D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2

154 R&B Ele SOR 2-15-3(D)v 21.80 RMT 256.00

wire, IP-65) with non integral suitable Driver complete

(E) Under Water Light,12V DC including Driver,IP-67 with die-

cast/deep drawn housing with impact resistance clear

155 R&B Ele SOR 2-15-3(E)v 26.00 EACH 1205.00

toughened glass. (ii) 12 watts cat.iii FOR WALL LIGHT ON

156 R&B Ele SOR 2-15-3(F)v (F) Spot Light 425 Lumens, Surge-2KV(ii) 8 to 11 Watts cat iii 30.00 EACH 1597.00

Supplying & erecting approved make low noise decorative

157 R&B Ele SOR 25-26 5-3-3 exhaust fan having square frame ABS body with inbuilt 15.00 EACH 1990.00

lowers & square frame.200mm with 1350RPM Cat.II

Supplying & erecting approved make Four Pole 415V

Motorised Automatic transfer switch including controller

with UV/OV, phase sequence, single phasing and

frequency protection interior for panel mounting with

operating mechanism A.C.23A duty confirming to IS for (F )

Providing and erecting busbar chamber confirming to IS-

375 fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary

busbar supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated current /

159 R&B Ele SOR 25-26 3-7-1 cross section area) duly wrapped with colour insulation 1.00 EACH 6720.00

tape for phase sequence, three phase & neutral each

Suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required

size with necessary connections.(D) Suitable for 400 Amp.

Providing and erecting Sheet Steel powder coated

Vertical MCB distribution board (VTPN) - flush /

surface mounted double door (IP54) fitted with

insulated copper busbar, isolated neutral link, earth bar

160 R&B Ele SOR 25-26 3-11-11(D) and DIN rail, confirming to IS 13032 and BS 5486- 3.00 EACH 18480.00

1986,IP-54 suitable for 250 AMP TPN MCCB + RCCB

as incomer and three phase outgoing as per following

.(The DBs should be used of same company of MCB to

be used) (D) 12 way outgoing

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

161 R&B Ele SOR 25-26 4-7-2(A) high pressure tool & connected to switchgear terminals 25.00 EACH 8.00

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm for 2.5sqmm

Tubular pole made from GI material incl. inbuilt junction

box haveing bakelite terminal junction box for cable

connection with holes suitable for foundation bolt.incl.cast

aluminium housing with poly carbonate diffuser registant to

heat sensitive electrical copmponents. Suitable for 3.0 mtr

162 RATE ANALYSIS-39 height pole with fixture pole size 90mm OD A class GI 7.00 EACH 13671.00

pipe(2.5mtr pipe+0.6 fixture)+100mm OD poly carbonate

diffuser cover.LED Fitting is wired with very high efficient LED

source 36w LED 3k/4k/6k, with also pu

paint/powdercoating finish as per drawing, direction and

approval of engineer incharge. Make B ART, Gruhudyog.

Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 45 x

45 x 100 cm. Deep in below ground level with plinth of

cm x 45 cm (or 45 cm dia x 45 cm) high upper ground

level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole+ flood light)

Supply, Installation, testing and commissioning of

Computer System with UPS system for Surveillance and

Monitoring - Pentium Core i5 with up to 4.70Ghz CPU

speed, minimum of 8 GB RAM, up to 24MB cache,

164 MARKET RATE 52X32X52X CDRW Drive & 2TB HDD, optical Mouse, 106 1.00 EACH 40000.00

keys keyboard,Mouse, 2 nos. 10/100 Mbps Ethernet card

,USB connection & internal modem, 17" colour graphics TFT

monitor & Original Windows 11 and anti-virus software

loaded. (Dell/Lenovo/HP)

SITC of 4 Megapixel up to 20 meter IR IP66 ,Varifocal ,Water

Proof outdoor type Bullet IP netwrok Camera : Up to

megapixel high resolution Full HD1080p video Dual stream

with 4mm lens - 3D Digital Noise Reduction3-axis

adjustment DC12V Support H.265+ with all required

166 MR Supply, Installation, Testing & Commissioning of 16 port NVR 5.00 EACH 33500.00

Supply, Installation, Testing & Commissioning of 24 CH port

Supply, Installation,Testing & Commissioning of 16 TB Hard

Supply, Installation,Testing & Commissioning of 4U Rack

With Required Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT -

171 MR Supply and Installation of HDMI CABEL. 25.00 RMT 120.00

172 MR Junction box for CCTV Camera 71.00 nos 275.00

Add Labor Cess 0.01