Development of Tourism Infrastructure at Patalganga, Boden Block of Nuapada District for the year 2025-26.

CIVIL WORK:- Earth work in excavation of foundation trenches in all type of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.(GF)

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. (GF)

Supplying of filling sand in foundation and plinth including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge.(GF)

Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,all taxes & royalities of materials, T & P etc.complete as per the directions of Engineer-in-charge.(GF)

First class Fly ash Brick masonry using bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.(GF)

Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.(GF)

First Floor

Second Floor

RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centring and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as per direction of the Engineer in charge. Footing (GF)

Column up to Plinth (GF)

Plinth Beam (GF)

Column up to First Floor (GF)

Lintel Beam (GF)

First Floor

Second Floor

Roof Beam (GF)

Roof Slab (GF)

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.(GF)

First Floor

Second Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.(GF)

First Floor

Second Floor

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.(GF)

First Floor

Second Floor

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.(GF)

Fixing granite tiles of approved dimension area above 0.1 Sqm & Up to 0.40 Sqm in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.(GF)

Fixing granite tiles of approved dimension area up to 0.1 sqm (10mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.(GF)

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite )- Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ),Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.(GF)

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.(GF)

Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.(GF)

First Floor

Second Floor

Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.(GF)

First Floor

Second Floor

Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (GF)

First Floor

Second Floor

Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.(GF)

First Floor

Second Floor

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. (GF)

GPH WORK: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC pipe

25mm dia PVC pipe

32mm dia C-PVC pipe

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP long body bib cock (Jaquar Make)CON-107KN

25mm dia brass full way valve (Shakti make)

32mm dia brass full way valve (Shakti make)

15mm CP Extension piece

125mm CP grating

15mm size C.P. flange

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supply all materials labour T&P & construction mesonary drain of size .03. mtr x 0.45mtr drains as per P.H design & specification including lead of all material to site

Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.

EI WORK- (Provision of Internal Electrification works) Recessed modular wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 6Amp 250volt modular type switch of make:-Havells/ Legrand/ Hager/Schneider,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FR pvc insulated Single Core multistrand copper conductor as earth wire Including all accessories and connection as per direction of Engineer-in-charge. (Make of wire:- Finolex/ Anchor/Havells/Polycab/ V.Guard/KEI). a) Group-A (Short Points)

b) Group-B (Medium Points)

c) Group-C (Long Points)

Twin control point wiring in PVC Conduit with Modular type Switch:-Wiring for twin control light point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way modular type switch with ISI marked,G.I.box (18 SWG) and earthing point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor for loop earthing etc. as required.

Recessed wiring to modular type 6Amp Socket Outlet with 2x1.5mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.(Make of Switch & Socket:-Havells/Legrand/ Hager/ Schneider) & (Make of wire:--Finolex/ Anchor/Havells/ Polycab/KEI/ V.Guard) a) Group-A (On Extension)

b) on existing board

Recessed wiring to modular type power plug point with 16Amp Socket of make:-Havells/ Legrand/Hager/Schneider and 2x6mm2 PVC Insulated S.C. F.R.L.S multistrand Cu.wire ISI marked in 20mm dia non-metallic PVC flexible conduit along with 1x2.5mm2 F.R.L.S PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire -Finolex/ Anchor/Havells /Polycab/V.Guard/KEI )

Wiring to Circuit/ Sub-main along with earth wire with following size of F.R.L.S PVC S.C.Cu. Wire (Make of wire:- Finolex/ Anchor/ Havells/ Polycab/ V.Guard/KEI) a) 1 x 1.5mm2 Submain for Invertor wiring

b) (1.8.1) 2X1.5mm2 + 1x1.5mm2

c) (1.8.2) 2X2.5mm2 + 1x1.5mm2

d) (1.8.3) 2X4mm2 + 1x1.5mm2

e) (1.8.5) 2X10mm2 + 1x4mm2

S/F of Extension board consisting of 3 Nos 6Amp Modular Switch with 3 Nos modular Sockets of Havells/Legrand/ Hager/Schneider make including all accessories and connections.

S/F of 12-way double door MCB distribution box with 1x63Amp DP MCB + 8 x 6 Amp SP MCB + 2x10Amp SP MCB as per direction of engineer in-charge( DB & MCB of make:- Schnider/Hager/Legrand/ L&T/ Havells)

S/F of modular step type electronic fan regulator of Havells/legrand/Hager/ Schneider make.

S/F of 1200mm AC Ceilling Fan of model Usha Allure plus (Ivory/White colour)/ Bajaj Regal gold NXG (Ivory/white)/ Havells festiva/ Crompton Diago/ equivalent ISI make & brand without Regulator as per direction of Engineer in charge.

S/F of 300mm Exhaust Fan of make & model Usha (turbo jet)/Bajaj (freshee)//Havells/V-Guard with safe guard.

Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated, die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens,, CRI not less than 80,CCT of 6000 degree K, THD less than 10%, with electronic driver, internal surge protection of 2.5 KV. L70 850 30000 hrs. and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engineer in-Charge. (Make of:- WIPRO/Havells/ Philips/ Panasonic/HALONIX or equivalent reputed make.

Surface/Recess mounted Indoor type 15 watt Round LED Luminaire with LED Lamp of WIPRO/JAQUAR/Philips/Halonix/Panasonic/ equivalent make.

Surface/Recess mounted Indoor type 12 watt Round LED Luminaire with LED Lamp of WIPRO/JAQUAR/Philips/Halonix/Panasonic/ Havells/equivalent.

S/F of modular type B.K Angle Holder of any ISI make.

S/F of 9 watt LED Bulb of Phillips/Bajaj/Havells make.

S/F of 63Amp ICDP Main Switch of Havells/HPL/L&T make.

S/F of 2 Core,16mm2 PVC Alluminium Armoured Cable of ISI marked, (Polycab/ Havells/KEI/Glowstar make)

S/F of 3&1/2 Core,50mm2 PVC Alluminium Armoured Cable of ISI marked, (Polycab/ Havells/KEI/Glowstar make)

S/L of SWG No.8 G.I.wire for earth continuity from Earth pit to Panel board.

S/F of Standard Earthing complete with provision of 600x600x3.15mm thick copper plate along with25x5mm copper strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal and salt as required.

EI WORK- (Provision of Highmast Lights) Supply,Transportation, Erection,Testing & Commissioning of 10Mtr. Long Hot Dip Galvanized Octagonal pole for High Mast Light made up of High tensile steel and high purity zinc suitable to withstand the wind speed of 180 Km/Hr as per IS 875 with Foundation Base plate of dimension (L-275xB-275mmxT-16mm),Pole dimension as Top dia-70mm,Bottom Dia-175mm,Sheet thickness-3mm, Foot rest and provision to hold 8 Nos of 400watt LED Flood light fittings.Foundation bolt of size-M20xlength 750 mm with hot dip galvanized. (Make of Pole:- Bajaj/Utkarsh/Electro).

Supply & Fixing of Galvanized Decorative Round Arm Bracket with all accessopries suitable for fixing of 8 Nos LED Flood Light Fittings of any ISI make.

Supply & Fixing of Loop in Loop out Junction box with all materials (DP MCB 20Amp-1No of L&T/Legrand/Havells make,4way bakelite connector-1No,bakelite board-1No, 6 sq mm 4 Core pvc insulated single core multistrand copper wire of Finolex/Anchor/Havells/Polycab make-15mtr, 32A DP Switch-1No of any ISI make) etc.

Excavation of pole pit in all kind of soil including rock of all verity of size 600mmx600mm and depth 1200mm with filling of sand to a height of 100mm ,100mm metal concrete and then laying foundation of Reinforced cement concrete (1:2:4) of 450mmx450mmx1000mm high with granite metal of nominal size 20mm to 25mm including side shuttering and grouting of foundation bolts and erection of pole as specified above including watering for curing/ ramming it as per requirement including provision for passage of cables and finishing the surface with 1:4 ratio cement plaster.

Supply,Installation,Testing & Commissioning of 400 watt LED Flood Light Luminaire with efficiency 120 Lumens/watt and indivisual LED with secondary optics made in high pressure die-cast housing with toughned glass and heat sink in Aluminium extrusion with IP 66 protection complete of Havells/Philips/Bajaj make.

Supply & Installation of LED type single dome aviation obstruction light.Type-BGAV 302 LED of Bajaj/Havells/ Philips/ equivalent make & brand.

S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.

Supply & Fixing of 63Amp Cubicle panel board (Outdoor stand mounted feeder panel) of size-36" x 24"x 10" assembled with 63Amp 4-pole MCCB,16kA-1 No as Incomer,32Amp TPN MCB-1No, 25 Amp DP MCB-3 Nos,Digital Timer with 32Amp TP Contactor-1 set for automatic switching of Luminaries. (MCCB,MCB,Timer & Contactor should be make of Siemens/ Schneider/legrand/L&T/TC/ Havells)

Suppy & Laying of 2 Core 16 sq mm PVC insulated Alluminium Armoured Cable of Polycab/Havells/Nicco/Glowstar make.

Suppy & Laying of 3&1/2 Core 25 sq mm PVC insulated Alluminium Armoured Cable of Polycab/Havells/ Nicco/ Glowstar make.

Supply and laying of 32mm 6kgf/cm2 ID HDPE pipe of ISI marked as per direction of engineer in charge.

Cable trenching with HDPE pipe in all type of soil with excavation of earth,laying of cable with sand cushing and brick laying etc.& filling of loose soil upto ground level.

Please Enable Macros to View BoQ information