Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-AOC | ₹1.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.2 L+₹9,359.03 (8.22%)Rejected-AOC | ₹1.2 L+₹9,359.03 (8.22%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | PWD CONTRACTOR L1 | Raveendran. M L2 |
|---|---|---|---|---|---|
| 1.00FIRST FLOOR SHEET ROOFING WORK | |||||
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.22 | cum | 7,123.38 ₹1,538.65 Lowest | 7,862 ₹1,698.19 |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 2.88 | sqm | 298.91 ₹860.86 Lowest | 330 ₹950.4 |
| 1.00 | 51.18.12.6:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) <br> External work - 50 mm nominal dia | 19.6 | metre | 489.7 ₹9,598.12 | 440 ₹8,624 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 455.4 | kg | 150.49 ₹68,533.15 Lowest | 165 ₹75,141 |
| 1.00 | OD368329/2023-2024:Providing and fixing precoated galvanised iron profiles sheets (size shape, and, pitch of corrugation as approved by engineer in charge) .3mm(+.05%),in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat of 15-18 microns. Sheet should be protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x5mm) with EPDM seal complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. | 69 | sqm | 483.62 ₹33,369.78 Lowest | 534 ₹36,846 |
Tender Value
₹1.3 L
EMD Value
₹3,175
Closing Date
10 Mar 2026, 4:00 pmClosed
SUBITHA CS
Office of the Assistant Engineer LIDEW Section
Retender Annual Plan-ANAKKARA GRAMAPANCHAYATH 2023-24 PURAMATHILSSERY ANGANAWADI MAINTANANCE IN WARD NO 11-PROJECT NO 260-26
2026_LSGD_842977_12
ET 11/25-26/AE/LSGD/ANK
Open Tender
Civil Works - Roads
Item Rate
90 days
ANAKKARA
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,175
Yes
18 Jun 2026
3 Mar 2026
11 Mar 2026
3 Mar 2026
10 Mar 2026
3 Mar 2026
FIRST FLOOR SHEET ROOFING WORK
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
51.18.12.6:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) <br> External work - 50 mm nominal dia
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD368329/2023-2024:Providing and fixing precoated galvanised iron profiles sheets (size shape, and, pitch of corrugation as approved by engineer in charge) .3mm(+.05%),in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat of 15-18 microns. Sheet should be protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x5mm) with EPDM seal complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1422952.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1422952.xls
BOQ • 0.30 MB
nit260.pdf
Tender Documents • 0.03 MB
sbd260.pdf
Tender Documents • 1.64 MB
tenderdocuments.pdf
Tender Documents • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .