Construction of Administrative Building (G+1) with various Infrastructure elements, Building amenities cum facilities, Landscaping, Gardening and Lighting work in Charanka Solar Park at Village: Charanka, Taluka: Santalpur, Dist. Patan, Gujarat

No Figure (Rs)

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm Rupees Twenty Eight Thousand Four

1 1.61013 Hector 28,455.09

removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle Hundred Fifty Five and Nine Paise

Rupees Five Hundred Sixty Six and

2 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. 50 Cu.m. 566.94

Ninety Four Paise

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off Rupees Two Hundred Seventy Nine and

the excavated stuff upto 50 Meter lead. (C) Hard Murrum Eighty One Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off Rupees Three Hundred and Eighty Nine

the excavated stuff upto 50 Meter lead.(C) Hard Murrum Paise

Earthwork for embankment including breaking clods, dressing with all lead and lift and including watering rolling and

Rupees Two Hundred Twenty Seven and

5 consolidation of subgrade in layers at O.M.C. to required dry density including filling the depression which occur during the 4186.4 Cu.m. 227.91

Ninety One Paise

process using power roller 8T to 10T.(A) From Borrow pits within land width

Construction of embarkment with approved material obtained from borrow pits with all lifts and leads, transporting to site

Rupees One Hundred Twenty Eight and

6 spreading, grading to required slope and compacting to meet requirement to table 300-2 , Construction of Embankment with 50 Cu.m. 128.15

Fifteen Paise

Material Obtained from Borrowpits

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in Rupees One Hundred Thirty Seven and

depth consolidating each disposited layer by ramming and watering. Forty Seven Paise

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and Rupees Six Hundred Twenty Nine and

consolidating etc. complete. Forty Eight Paise

consolidating etc. complete. Eighty Six Paise

Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated Rupees Two Hundred Fifteen and Sixty

stuff and depositing on the road side slope as directed upto 50Mt.lead. Two Paise

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road)(3) Crushed stone aggregate for Hard Quality up to

mm size. Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and gradient Rupees Seven Hundred Seventy Four

(excluding spreading of Blindage)(iii) 25mm to 50mm size crushed stone. Spreading blindage or road crust filling the gaps in and Eight Paise

metal and leveling to camber and gradient as directed.(i) Murrum.

Rolling and consolidating water bound macadam (except laterite and Kankar) including watering not exceeding 150mm

12 thickness (Main layer including binding materials ) including filling in depressions which occur during the process.(A) With 561 Sqmt 21.69 Rupees Twenty One and Sixty Nine Paise

power roller exceeding 8 tonne and not exceeding 12 tonne.

Rupees Four Hundred Twenty Nine and

13 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 183 Cu.m. 429.24

Twenty Four Paise

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and Rupees Three Thousand Five Hundred

curing complete excluding cost of formwork in (A) Foundation and Plinth Seventy Five and Forty Nine Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Rupees Four Thousand Nine Hundred

cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.-Footing Ninety Four and Twenty Two Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Seven Thousand Nine Hundred

16 cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two level.-Column up to 18 Cu.m. 7,976.45

Seventy Six and Forty Five Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Seven Thousand Two Hundred

17 cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two level-Column up to 43 Cu.m. 7,207.71

Seven and Seventy Paise

floor two level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Six Thousand Six Hundred Ten

18 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 22 Cu.m. 6,610.22

and Twenty One Paise

upto floor two level.-Ground Beam

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Six Thousand Six Hundred Ten

19 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 24 Cu.m. 6,610.22

and Twenty One Paise

upto floor two level.-Plinth Beam

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Six Thousand Six Hundred Thirty

20 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 53 Cu.m. 6,635.75

Five and Seventy Four Paise

upto floor two level.-Beam

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Rupees Five Thousand Four Hundred

cost of reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level-Lintel & Sill Eleven and Seventy Two Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Six Thousand Three Hundred

22 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 74.2 Cu.m. 6,371.25

Seventy One and Twenty Four Paise

upto floor two level.-Slab

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement Rupees Four Thousand One Hundred

for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.-Grade Slab Seventy One and Fifty Five Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Rupees Six Thousand Two Hundred

cost of reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level-Wall Eight and Twenty Five Paise

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work, using cement content

as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for

a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement

Rupees Six Thousand Eight Hundred

25 concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of reinforcement including 5.4 Cu.m. 6,848.62

Forty Eight and Sixty One Paise

cost of centering shuttering finishing and admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 475 kg )-Staircase

Providing and laying of un-reinforced, dowel jointed, plain cement concrete pavement (concrete Grade M-30) over a prepared

sub base with 53 grade cement @ 440 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse

aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with

Rupees Six Thousand Six Hundred Nine

26 a fixed form or slip form paver, spread, compacted and finished in a continuous operation including cost of contraction, 112.1 Cu.m. 6,609.13

and Twelve Paise

expansion, construction and longitudinal joints, joint filler, 200 micron separation membrane, sealant primer, joint sealant,

debonding strip, dowel bar, tie rods, admixtures as approved, curing compound, finishing to lines and grades as per drawing. -

Trimix as per rate analysis

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto Rupees Seventy Seven and Twenty Nine

floor two level Paise

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and Rupees Four Thousand Two Hundred

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(C) Fly Ash Bricks-Below Plinth Fifty Six and Thirteen Paise

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and Rupees Four Thousand Thirty Four and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional-Superstructure Eighty Eight Paise

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and Rupees One Hundred Forty One and

finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)-Ceilling plaster Ninety Two Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering Rupees One Hundred Sixty Eight and

upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)-Internal Plaster Eighty Seven Paise

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and applying 25mm thickTexture plaster with finishing with Purlina / Rustic texture material Providing 2 coats of

10mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) with Extra over items 58 to 64 for Rupees One Thousand Two Hundred

finishing with a floating coat of neat cement slurry and (A) for providing and mixing water proofing materials in cement mortar Sixteen and Ninety Six Paise

in proportion recommended by the manufacturer. Providing and supplying final coat of heritage plaster as directed by site

incharge and approved by architect-Exterior Plaster

Providing and laying Flamed finish Dark grey / Steel Grey Granite stone flooring / Coping in required size, design and patterns, in

linear as well as curvilinear portions all complete as per the architectural drawings with 30 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-8 mm gap as per design

and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or struck pointed as per design and drawing with white Rupees Two Thousand Three Hundred

cement slurry admixed with pigment of matching shade including rubbing, pointing, curing, polishing, moulding/ champhering Twenty Eight and Fifty One Paise

at edges and final scrubbing using mechanical/ manual means to achieve clean surface etc. all complete as specified and as

directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval, complete for finished item of work. Wax

polishing is strictly not allowed. (B) 30 mm thick.

Providing and laying Flamed finish Light grey / Cera grey Granite stone flooring / Coping in required size, design and patterns, in

linear as well as curvilinear portions all complete as per the architectural drawings with 30 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-8 mm gap as per design

and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or struck pointed as per design and drawing with white Rupees Two Thousand Five Hundred

cement slurry admixed with pigment of matching shade including rubbing, pointing, curing, polishing, moulding/ champhering Three and Forty Four Paise

at edges and final scrubbing using mechanical/ manual means to achieve clean surface etc. all complete as specified and as

directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval, complete for finished item of work. Wax

polishing is strictly not allowed. (B) 30 mm thick

Providing and laying Riverwash Red and Brown mandana Sand stone flooring / Coping in required size, design and patterns, in

linear as well as curvilinear portions all complete as per the architectural drawings with 30 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-8 mm gap as per design

and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or struck pointed as per design and drawing with white Rupees One Thousand One Hundred

cement slurry admixed with pigment of matching shade including rubbing, pointing, curing, polishing, moulding/ champhering Thirty Six and Fifty Seven Paise

at edges and final scrubbing using mechanical/ manual means to achieve clean surface etc. all complete as specified and as

directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval, complete for finished item of work. Wax

polishing is strictly not allowed. (B) 30 mm thick

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

Rupees One Thousand Four Hundred

36 new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color 155.2 Sqmt 1,472.91

Seventy Two and Ninety One Paise

cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

Rupees One Thousand Five Hundred

37 new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color 137.2 Sqmt 1,546.85

Forty Six and Eighty Five Paise

cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

Rupees Two Thousand Two Hundred

38 coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 28.6 Sqmt 2,281.77

Eighty One and Seventy Seven Paise

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying 20 mm thick Sand Blasted/ lappato granite stone machine cut in single piece (Max. available) on floor with

Rupees One Thousand Four Hundred

39 8mm grouve 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry with matching pigment including rubbing and 15.2 Sqmt 1,472.58

Seventy Two and Fifty Eight Paise

polishing half rounding edge etc. complete colour and shed as approved by architect engineer in charge.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and laying polished GRANITE stone slab 18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick

Rupees One Thousand Four Hundred

40 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of 15.9 Sqmt 1,497.46

Ninety Seven and Forty Six Paise

slab including rubbing and polishing etc. complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1- Rupees One Thousand Five Hundred

cement : 3-coarse sand) and jointed with white cement slurry Ninety Two and Forty Paise

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab Rupees One Thousand One Hundred

including rubbing Eighty Four and Sixty Four Paise

and polishing etc. complete.

Providing and laying polished Mandana Stone stone slab 18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm

Rupees Eight Hundred Eighty Three and

43 thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade 7.4 Sqmt 883.92

Ninety Two Paise

of slab including rubbing and polishing etc. complete.

Providing and fixing Granite Jamb for door and windows of 40 to 60mm thick and width as per wall thickness polished and cut

as per required size of door/window opeinings. Fixed to wall and lintle with adhesive and Hilti Frame anchor HRD-CR2 10x100 at Rupees Two Thousand One Hundred

1000mm distance in vertical rames and 600mm distance in horizontal frames. Jamb fixed to walls with Adhesive Material Thirty Eight and Eighty Five Paise

Kerakol Bioflex Flexible Mineral Adhesive. as per instruction of site incharge complete

Providing and laying water proofing treatment on terrace including applying neat cement slurry 2.75 Kg./ Sqmt. On cement

admixed with water proofing component after cleaning the surface, laying cement concrete with brick bat 75 mm to 100 mm

thick with 50% of C.M. 1:5 admixed with water proofing component over 20 mm thick layer of C.M. 1:5 to required slope Rupees Five Hundred Twenty Four and

including ramming at junction of wall and slab, after two days of proper curing applying a second coat of cement slurry, finished Ninety Paise

the surface with 20 mm thick C.M. 1:4 china mosaic flooring and finally finished surface with white cement slurry, after finishing

with terrace shall be finished with water for a period of two week.

Providing and fixing five courses water profing treatment with bitumen felt consisting of second and fourth course of blown /

bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base

Rupees Four Hundred Eighty Three and

46 bitunen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of 46 Sqmt 483.11

Eleven Paise

stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre including preparation of surface

excluding grading complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300

Rupees Seven Hundred and Seventy

47 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand 784 Sqmt 700.74

Four Paise

layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and laying of Solid Concrete Cobble Square of Vyara make, in Shotblasted finish, colours specified by the architects,

Rupees One Thousand Three Hundred

48 using UV resistant colour pigments from Lanxess, wear resistant colour coordinated aggregates, water and oil repellence, 428 Sqmt 1,398.85

Ninety Eight and Eighty Five Paise

reduction of algae, moss and efflorescence formation. Size 97*97*80 mm thick. Nominal size of 100mm *100mm.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm

Rupees Three Hundred Seventy Four

49 thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint 606 Rmt 374.92

and Ninety Two Paise

with C:M 1:3 (1cement:3fine sand) etc complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. Rupees Twenty Four and Twenty Eight

complete. Paise

Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii)

Rupees Two Thousand Six Hundred Fifty

51 Fixing black kadappa stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on exposed faces of wall in C.M. 5.4 Rmt 2,656.06

Six and Six Paise

(1:4) etc complete.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm x 38.10mm x

1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm Rupees Two Thousand One Hundred

x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze Forty and Thirty Three Paise

colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with Rupees One Thousand One Hundred

colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation Seventy Five and Fifty Six Paise

Providing and fixing 35 mm thick water proof flush door solid core double shutter with 1mm thick laminated sheet on both

side of the shutter having teakwood lipping edge patti of 38 mm x 25.4 mm on all edges, including Indian teak wood frames

cm x 7 cm with Melamine Polish matching shade of laminate with Magnetic catcher triple strip vertical type(2 Nos), S.S.

Rupees Two Thousand Nine Hundred

54 tower bolt (barrel type) 300x10 mm (2 Nos) (Make : Define, Kich : TBR3S), Main door set handle 19mm dia x 150 mm SS 304 24 Sqmt 2,970.41

Seventy and Forty One Paise

MATT 10 x 150 mm connector (2 Nos), MAKE: DEFINE: DF-PH-02, kich:PRDH1906S and SS matt Hinges of 100mm X 75mm X

3.2mm (8 Nos) (Make : Kich Item No.PRBHT2B34 and Define Make - Item No. DF-BBH-04) with necessary SS fixtures and

fastenings etc. complete all SS fittings to be of SS304 matt finish as directed by Engineer-in-charge.

Providing and fixing openable 12mm thick toughened glass door as per drawing. It includes: Glass - 12.0 mm thick Clear

Toughened Glass, Patch Fitting Hardware (Dorma or equivalent) such as :- Top Patch, Bottom Patch, Bottom Lock - 1, D Handle -

Rupees Five Thousand Five Hundred

55 25 X 450 mm or as specified in drawing, Floor Spring FS 9000 (120 KG Load Capacity), etc. all accessories complete as per 17.9 Sqmt 5,555.04

Fifty Five and Four Paise

manufacturer and as per the details shown in drawing. All accessories to be used in SS316 grade. All accessories to be approved

by architect-in-charge and job to be completed as instructed by engineer-in-charge./ PMC

Providing and fixing wash down water closet wall hung (European type, W.C. Pan) with integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1 (1- Cement : 1-fine sand) (A) vitreous China Pattern :(i) in white colour, including plastic

seat and cover for wash down water closer with C.P. brass hinges and rubber buffers, Providing and fixing G.I. inlet connection

Rupees Eight Thousand Eight Hundred

56 for flush pipe with W.C. Pan, Providing and fixing 32mm dual flow metropole valve including concealed body with exposed 6 Nos 8,808.21

Eight and Twenty One Paise

shutoff provision and round flange of approved quality including fixing in pipe line etc. complete and providing and fixing

Health Faucet Heavy duty having pipe length of 1 rmt with hook with fitting etc. complete as directed by engineer in-charge.

(Make Hindware, Model as specified)

Providing and fixing Urinal of approved quality including connection with 15 mm dia brass screw down stop tap and with

Rupees Four Thousand Nine Hundred

57 integral longitudinal flush pipe. (A) Squating plate pattern white earthenware 550mm x 300mm. (Make Hindware, 3 Nos 4,926.02

Twenty Six and Two Paise

Model as specified)

Providing 18mm thick (400mm X 1100mm) Granite partition for urinals fixed with Mortar from wall as directed by Architect / Rupees Two Thousand Three Hundred

engineer incharge Thirty Nine and Ninety Four Paise

Providing and fixing raised toilet seat with cover for handicap toilet (Model R-35: Presalit – Commander or equivalent) as Rupees One Thousand Six Hundred

recommended by the etc completed as directed by E.T.C/PMC Thirty Eight and Seventy Three Paise

Providing and fixing 2 Nos. support arms and backrest to mount at fixed height (Model R 1100 -Commander or equivalent) for Rupees One Thousand Three Hundred

handicap toilet complete as recommended by the etc completed as directed by E.T.C/PMC Forty Nine and Twelve Paise

Providing and fixing table top Wash Basin single hole for piller tap and making good the same but including fitting (A) Vitreous

chaina : (II) Flat back wash basin 550mm x 400mm size in white colour including provinding and fixing C.P. brass waste coupling

Rupees Five Thousand Seven Hundred

61 of 32mm dia., chromium plated bottle trap with necessary couplings of approved quality, M. I. fisher union of 32mm dia., C.P 5 Nos 5,790.08

Ninety and Eight Paise

brass pillar tap of 15mm dia., PVC connection pipe from stop cock to pillar tap etc. complete. (Hindware, Cera,

Varmora,Johnson make)

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. Rupees Four Thousand Three Hundred

(CORA BIC COCK- 2Way) (F440002CP) Eighty Eight and Forty Five Paise

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Two Way Bib Tap With Rupees Two Thousand Nine Hundred

Wall Flange (i) 15mm dia. (CORA BIC COCK- 2Way) (F440004CP) Ninety Nine and Seventy Paise

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of Rupees Six Hundred Fourteen and

self cleansing design with C.I screed down or hinged grating including the cost of cutting and making good the walls. Nineteen Paise

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm Rupees One Thousand Two Hundred

x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type Forty Six and Ninety Two Paise

Providing and fixing Neo Max Flush Valve-40 mm Single Flush (Square) with Conclealed part and wall plate (Brand Hindware, Rupees Four Thousand One Hundred

Catalogue No F860074CP) Seventy One and Thirty Paise

Rupees One Thousand Seven Hundred

67 Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap (Brand Hindware, Catalogue No F440005CP) 14 Nos 1,737.20

Thirty Seven and Twenty Paise

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood Rupees Eight Hundred Fifty Nine and

sheet and fixing to wooden pluge with C.P. brass screws and washers. Forty One Paise

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH- 80) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of Rupees Three Hundred Forty Three and

clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and Ninety Five Paise

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of Rupees One Hundred Ninety Five and

clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and Sixty Seven Paise

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the Rupees One Hundred Nineteen and

help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe Fifteen Paise

and joints and fixing the same with adhesive solvent, including cost of all materials

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings make

PRINCE / UPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the Rupees Ninety One and Eighty Four

help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe Paise

and joints and fixing the same with adhesive solvent, including cost of all materials

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

73 100 Rmt 72.65 Rupees Seventy Two and Sixty Five Paise

the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all materials

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Rupees Eight Hundred Thirty Four and

160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be Concealed in walls as Thirty Eight Paise

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Rupees Nine Hundred Eighteen and

110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as Sixty Seven Paise

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Rupees Fifty Three Thousand Seven

Construction of a soak well of size 1.5 m Diameter and 2.4 m Deep. as per the approved drawing & design etc.in all sort of soil

76 1 Nos 53,724.93 Hundred Twenty Four and Ninety Three

complete as directed and approved by engineer incharge.

Construction of a septic tank of size 3.60 m X 1.15 m X 1.50 m. as per the approved drawing & design etc.in all sort of soil Rupees Sixteen Thousand Nine Hundred

complete as directed and approved by engineer incharge. Eleven and Forty Four Paise

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- Rupees Two Thousand Nine Hundred

coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar Thirty Two and Ninety Three Paise

1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Supplying & installing PVC Ball Valve conforming to IS 778, of RB, Italy or equivalent. Ball valve must be having screwed

Rupees Four Hundred Fifty Nine and

79 ends. The ball valve should be with stand with maximum pressure up to 16 Kg/cm2. Complete job as specified & 2 Nos 459.55

Fifty Five Paise

directed. a) 25mm

Rupees Nine Hundred Fifty Eight and

80 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 11 Nos 958.17

Seventeen Paise

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. Rupees Two Hundred Seven and Sixty

complete. Six Paise

Rupees Eight Hundred Sixty Seven and

82 Supplying & installing Gunmetal Non return Valve horizontal (screwed end) 50 mm dia. Complete job as specified & directed. 5 Nos 867.74

Seventy Four Paise

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection

83 5000 Litre 3.95 Rupees Three and Ninety Five Paise

etc. complete on terrace

Providing 10L SS-306 Pedal Dustbin. Pedal-Activated Lid Provides Hands-Free Operation, Promoting Hygiene and Convenience, Rupees One Thousand Six Hundred Sixty

While Keeping the Waste Securely Contained. Easy to Clean and Maintain. Six and Fifty Paise

Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new

85 wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign 1271 Sqmt 40.59 Rupees Forty and Fifty Nine Paise

matter and sand papered smooth

Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to

86 give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand 1271 Sqmt 132.00 Rupees One Hundred Thirty Two Only

papered smooth

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after Rupees One Hundred Twenty Two and

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete Fourteen Paise

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

Rupees One Hundred Twenty Four and

88 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % 438 Sqmt 124.35

Thirty Five Paise

concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Metal Work : Providing, fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes

with all leads & lifts using Hot dip Galvanised with min. 65microne thk over MS Rolled Steel Sections, Hollow sections, Tubular Sections, MS

Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bright Bars, Angles, MS Sheet, Girder, Beam, cattle trap. deep threaded MS bolts,

threaded J bolts, insert plate, support plate etc as per drawing. all confirming to latest relevant IS codes for the work of steel structures like

gratings over drain channel, I beams, staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap,

windows, pipe rack, rungs, false ceiling frame work, Roof canopy, fencing posts, M.S. Screen & fencing jali frame work etc. including

straightening, cutting, bending, bolting and welding the members all as per structural drawings and as per detailed specifications (for materials

& workmanship) including necessary scaffolding/ staging etc. complete in the situations described hereinafter and comprising of : i) Profile

Cutting of components to required length/ width and shape/ profile; ii) Smooth grinding/ machining of edges/ faces/ all welding joints; iii)

Necessary welding (electric arc welding) for required weld lengths and sizes. iv) Machine drilling of holes for joining/ anchoring (Standard

measurements will be paid for as actual cut length used at site). The rate shall include dry sanding, degreasing (wet cleaning) & preparation of

rustfree surface manually or mechanically, metal putty to make the surface even and smooth, 2 coat zinc chromate yellow oxide primer and

coat of enamel paint of approved shade of paint over all the surfaces of the steel sections or as specified in the drawing. Rupees One Hundred Twenty Six and

Note: The contractor shall be submit fabrication drawings based on construction drawings (that may be issued during construction period Twenty Five Paise

with at least one mock up approved by architecture ) for approval by the Architect/ Engineer. The fabrication work shall start only after

approval of the fabrication drawings submited by contractor. Any change required in the fabrication drawings shall be carried out at No extra

cost. Fabrication shall be in a perfect architectural workmanship manner and as provided in section V & VI of IS 800 & IS

Welding shall be carried out by qualified welders/ fabricators.It should also include the cost of necessary scaffolding/ staging, zinc coated nut-

bolt as required for safety, structural stability of all works at site. Any change required in the fabrication drawings shall be carried out at No

extra cost. Fabrication shall be in a perfect architectural workmanship manner and as provided in section V & VI of IS 800 & IS 7215. Welding

IS 822, & IS 823. Erection/ hoisting shall commence only after passing of fabricated parts by Architect/ Engineer. Rate shall be inclusive of

cutting, wastage, welding, bending (shop at site), bolting wherever necessary, in position welding of required length, grinding, finishing edges,

filling & finishing the welded spots & gaps with grout/ sealent/ metal putty to make the surface even and smooth, 2 coat zinc chromate yellow

oxide and 2 coat of enamel paint of approved shade etc. complete. with zinc coated nut-bolt as required for safety, structural stability of all

works at site. Breaking of floor for anchoring and its repair shall be also be included for this work

GRC Fins- 900mm x 100mm x 650mm (WXBXH) out to out dimensions

Supply, fabrication, and installation of Glass Reinforced Concrete (GRC) elements as per approved design and architectural

drawings GRC shall be manufactured using alkali-resistant glass fiber (minimum 4.5% by weight) and high-quality cementitious

matrix (Ordinary Portland Cement 43/53 grade) GRC mix shall have a minimum compressive strength of 40 MPa, flexural

strength of 8–10 MPa, and water absorption <10%.Thickness of GRC panels to be 15–20 mm (or as specified by the

consultant/architect). The surface shall be smooth or textured as per approved sample. Finish: Pigmented, painted, or natural Rupees Twenty Five Thousand Two

finish as per approved design. Color: As per architect’s requirement (integral pigment or external coating) All GRC components Hundred Fifty Only

shall be factory-cast using the spray-up or premix process in controlled conditions. Joints and edges shall be neatly finished and

free of burrs or sharp edges. Mold details to be created using CNC/wooden/fiberglass molds based on 2D/3D architectural

drawings. GRC panels shall be installed using GI/SS brackets, bolts, and anchors. Fixing system to be concealed and corrosion-

resistant. Adequate expansion gaps to be provided as per design requirements. Installation to be carried out by trained

personnel under supervision of the architect or project engineer. All including transportation and installation labour

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

GRC Window Modules: 1450mm X 450mm X 1580mm (W x B x H) overall dimension, with central cutout as per drawing

Supply, fabrication, and installation of Glass Reinforced Concrete (GRC) elements as per approved design and architectural

drawings GRC shall be manufactured using alkali-resistant glass fiber (minimum 4.5% by weight) and high-quality cementitious

matrix (Ordinary Portland Cement 43/53 grade) GRC mix shall have a minimum compressive strength of 40 MPa, flexural

strength of 8–10 MPa, and water absorption <10%.Thickness of GRC panels to be 15–20 mm (or as specified by the

consultant/architect). The surface shall be smooth or textured as per approved sample. Finish: Pigmented, painted, or natural

finish as per approved design. Color: As per architect’s requirement (integral pigment or external coating) All GRC components

shall be factory-cast using the spray-up or premix process in controlled conditions. Joints and edges shall be neatly finished and Rupees Fifteen Thousand Two Hundred

free of burrs or sharp edges. Mold details to be created using CNC/wooden/fiberglass molds based on 2D/3D architectural Sixty Three and Ninety Four Paise

drawings. GRC panels shall be installed using GI/SS brackets, bolts, and anchors. Fixing system to be concealed and corrosion-

resistant. Adequate expansion gaps to be provided as per design requirements. Installation to be carried out by trained

personnel under supervision of the architect or project engineer. Providing and fixing window having extruded aluminum

Colour Powder Coated section in the Casted GRC frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x

1.50mm ,@ Wt. 1.06 Kg/mt with Hinged shutters of horizontal member size 456Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details etcAll including transportation and installation labour

Providing and fixing 4 mm ACP (Aluminum composite Panel) with PVDF Finish as per design. Fixing on 40 x 40 x 2 mm square MS

Rupees Two Thousand Two Hundred

92 Pipe as required and frame fabricated; painted with bestquality epoxy coatings in black and white bends. The details of each 906 Sqm 2,222.00

Twenty Two Only

board shall be as per the instruction of engineer in charge.

Providing and fixing stainless steel ( Grade SS 304 - Matt finish) knock down railing system comprising of 50mm dia handrail,

fixed on 50 mm dia round baluster placed at maximum 1200mm c/c along with 2-3 Nos. of 16 mm dia parallel mid rails

connected at the side of baluster with fixtures. The balustrade would be fixed onto floor with base plate ( SS304 grade) of

minimum 6-8 mm thickness anchored down on slab with Hilti fasteners. Base plate shall be concealed with suitable S.S. cover

cap so that the mounting anchor fasteners are not visible after installation. Wall thickness of all pipes shall be taken as 1.5mm

along with all visible components developed in High Grade S.S. and whenever required, joints to be filled with bushings for Rupees Seven Thousand Two Hundred

extra strength. Railing height to be taken at 1000mm from floor level. Rates should be inclusive of welding, grinding, buffing, Seventy Two Only

polishing and making curvature (wherever required) fixing the railing with necessary accessories & stainless steel dash

fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement

as per approval of Engineer/Architect.Work shall complete includes all type of tools,tackles, all level & Height, labour, mock

sample etc complete as per the detailed drawing and instruction of EIC. Note : Handrail Lenght will be measured from Starting

Providing and Fixing the S.S. 304 Letters of given size as per Architect's drawings (Approx Height of each letter 10 to 12 inches) Rupees Two Thousand Seven Hundred

along with all necessary hardwares and accessories Fifty and Forty Three Paise

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x

0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A Rupees Six Hundred Six and Ninety Five

of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt Paise

connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

Providing and fixing wooden planks ceiling with tounged and grooved jointing and wood screws (frame work and cover fillings Rupees One Thousand Forty Six and

to be measured and laid for separately) (A) Indian Teak wood (i) 12mm thick Thirty Three Paise

Providing and fixing supports of 50mm X 50mm Ply Sandwich frame made from 12mm commercial ply joinery erected frame at

Rupees Five Hundred Twenty Five and

97 600 to 800 mm c/c. in vertical and Horizontal Direction, Suspension from the slab to be with verticle members. Includign all 6 Sqmt 525.20

Twenty Paise

necessary hardware, etc. complete as per direction by EIC/ PMC

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and fixing fibre insulations board lining with butt jointing and Nails (frame worked cover fillets to be measured and Rupees Four Hundred Forty Three and

paid for separately) (iii) 25mm thick Fifty Six Paise

Providing and fixing On site wall paneling with supports of 50mm X 50mm Ply Sandwich frame made from 12mm commercial

ply joinery erected frame at 600 to 800 mm c/c. in vertical and Horizontal Direction or as per drawing in case . The frame is to

be sandwiched with 8mm thick BWR ply to be fixed from both sides .The partition is to be finished with 1.0 mm thick approved

colour laminate of standard make. Fixed to floor and wall with approved fasteners. Outer face of thePaneling to be finished

with 12mm ply and 1mm thick laminate with 2mm X 2mm groove at indiacated intervals, 30% of the surface to be 8mm thick U Rupees Four Thousand Eight Hundred

foam with lining cloth cover on it & upholstered of suggesed shade & finish in seat & back on all open visible sides with basic Ninety and Forty Two Paise

rate Rs. 400/ - per meter (Minimum Rate). Alignment of Laminate figures to be vertical on all faces All other exposed edges of

sections are to be properly covered with 8mm ply & laminated finish, all exposed wooden members to have natural colour

polish with matching colour, the cost shall include necessary fittings, labour, contingencies etc complete strictly as per the given

Providing and fixing On site 1200 mm height 75mm thick partition supports of 50mm X 50mm Ply Sandwich frame made from

12mm commercial ply joinery erected frame at 600 to 800 mm c/c. in vertical and Horizontal Direction or as per drawing in case

. The frame is to be sandwiched with 8mm thick BWR ply to be fixed from both sides .The partition is to be finished with 1.0 mm

thick approved colour laminate of standard make. Fixed to floor and wall with approved fasteners. The partition shall have

100 12.0 mm thick plain Glass, including approved plain /itching/ Frosted pattern to be fixed with kail/pine wood/ Mdf moulding of 14.9 Sqmt 6,060.00 Rupees Six Thousand Sixty Only

size 75 x 30mm with natural polish to match the partition. Outer face of the partition to be provided with 2mm X 2mm groove,

. Alignment of Laminate figures to be vertical on all faces All other exposed edges of sections are to be properly covered with

8mm ply & laminated finish, all exposed wooden members to have natural colour polish with matching colour, the cost shall

include necessary fittings, labour, contingencies etc complete strictly as per the given drawing.

Making and Providing work Table -with 25 mm thick ply counter top and Cable Manager, and with 1) fitting of sidebox, 2)

providing precise gaps for Electrical boxes / points etc 3) Provide and install CPU Box, Keyboard Tray and cable manager from

approved make as shown in the drawing.Exposed Edge to be lined with teak wood finished with matching polish. Counter Top

Rupees Thirty Two Thousand Three

101 to be provided with 1.0mm solid core laminate of approved make. All exposed sides of the work table to be covered with 1 Nos 32,320.00

Hundred Twenty Only

1.0mm laminate including inner side. Carcase to be eracted with 18mm BWR Ply. rates are inclusive of all material. 0.5sqm of

Solid Surface of approved make -12mm thick labour costing of sidebox which will be paid paid seperately. (Desk-1)

(2740X700X760mm)(WxDxH)

Making and Providing work Table -with 25 mm thick ply counter top and Cable Manager, and with 1) fitting of sidebox, 2)

providing precise gaps for Electrical boxes / points etc 3) Provide and install CPU Box, Keyboard Tray and cable manager from

approved make as shown in the drawing.Exposed Edge to be lined with teak wood finished with matching polish. Counter Top

Rupees Twenty Five Thousand Two

102 to be provided with 1.0mm solid core laminate of approved make. All exposed sides of the work table to be covered with 3 Nos 25,250.00

Hundred Fifty Only

1.0mm laminate including inner side. Carcase to be eracted with 18mm BWR Ply. rates are inclusive of all material. 0.5sqm of

Solid Surface of approved make -12mm thick labour costing of sidebox which will be paid paid seperately. (Desk-2)

(1735X700X760mm)(WxDxH)

Making and Providing work Table -with 25 mm thick ply counter top and Cable Manager, and with 1) fitting of sidebox, 2)

providing precise gaps for Electrical boxes / points etc 3) Provide and install CPU Box, Keyboard Tray and cable manager from

approved make as shown in the drawing.Exposed Edge to be lined with teak wood finished with matching polish. Counter Top

Rupees Thirty Five Thousand Three

103 to be provided with 1.0mm solid core laminate of approved make. All exposed sides of the work table to be covered with 1 Nos 35,350.00

Hundred Fifty Only

1.0mm laminate including inner side. Carcase to be eracted with 18mm BWR Ply. rates are inclusive of all material. 0.5sqm of

Solid Surface of approved make -12mm thick labour costing of sidebox which will be paid paid seperately. (Desk-3)

(2825X600X760mm)(WxDxH)

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Making and Providing work Table -with 25 mm thick ply counter top and Cable Manager, and with 1) fitting of sidebox, 2)

providing precise gaps for Electrical boxes / points etc 3) Provide and install CPU Box, Keyboard Tray and cable manager from

approved make as shown in the drawing.Exposed Edge to be lined with teak wood finished with matching polish. Counter Top

Rupees Fifty Five Thousand Five

104 to be provided with 1.0mm solid core laminate of approved make. All exposed sides of the work table to be covered with 1 Nos 55,550.00

Hundred Fifty Only

1.0mm laminate including inner side. Carcase to be eracted with 18mm BWR Ply. rates are inclusive of all material. 0.5sqm of

Solid Surface of approved make -12mm thick labour costing of sidebox which will be paid paid seperately. (Desk-4)

(6200X600X760mm)(WxDxH)

Making and Providing work Side Table -with 25 mm thick ply counter top and Cable Manager, and with 1) fitting with work

table, 2) providing precise gaps for Electrical boxes / points etc 3) Provide and install 3 drawers as shown in drawing fixed with

Hettich KA4732/Zinc/12"-300mm IW12.7 mm/35Kg Drawer Channel. Openable with 100mm ss Brush finish Handle from

Kitch/Tune or equivalent make. Provide and install 2 openable shutters fixed to 18mm carcase with 2 Onsys 4447i Silent Hinge - Rupees Fifteen Thousand Six Hundred

9.5 Crank Door Hinge with Mounting Plates & Cover Caps each and 1 corner shutter with Onsys 4447i, Silent Hinge - 0 Crank Fifty Five Only

Door Hinges with Mounting Plates & Cover Caps. Complete with 1 handle of 100mm ss Brush finish Handle from Kitch/Tune or

equivalent make. Shutter finished with 1.0mm laminate of approved make and inner laminate of 1.0mm laminate of approved

make. Complete as per instruction by site engineer and approved by architect

Making and Providing Floor Standing storage Unit (3600X450X760mm) (W X D X H) with Carcase and Openable shutters with

18mm Ply and 1.0 mm laminate on both the sides, Internal dividers from 18mm Ply with 1) providing and installing Hinges

Provide and install 4 openable shutters fixed to 18mm carcase with 2 Onsys 4447i Silent Hinge- 9.5 Crank Door Hinge with

Rupees Forty Four Thousand Nine

106 Mounting Plates & Cover Caps each shutter , Handles 2) Godrej Multipurpose lock etc. Complete with 1 handle of 100mm ss 1 Nos 44,945.00

Hundred Forty Five Only

Brush finish Handle from Kitch/Tune or equivalent make. Top of storage to be finished with 25mm thick counter top and 1.0mm

thick solid core laminate matching with side table and work table rates are inclusive of all material 0.5sqm of Solid Surface of

approved make -12mm thick upto 1sqm, labour. (Storage-1) (File Rack / floor standing Storage)

Making and Providing Floor Standing storage Unit (1000X450X760mm) (W X D X H) with Carcase and Openable shutters with

18mm Ply and 1.0 mm laminate on both the sides, Internal dividers from 18mm Ply with 1) providing and installing Hinges

Provide and install 6 openable shutters fixed to 18mm carcase with 2 Onsys 4447i Silent Hinge- 9.5 Crank Door Hinge with

Rupees Eleven Thousand Eight Hundred

107 Mounting Plates & Cover Caps each shutter , Handles 2) Godrej Multipurpose lock etc. Complete with 1 handle of 100mm ss 3 Nos 11,867.50

Sixty Seven and Fifty Paise

Brush finish Handle from Kitch/Tune or equivalent make. Top of storage to be finished with 25mm thick counter top and 1.0mm

thick solid core laminate matching with side table and work table rates are inclusive of all material 0.5sqm of Solid Surface of

approved make -12mm thick upto 1sqm, labour. (Storage-2) (File Rack / floor standing Storage)

Making and Providing Floor Standing storage Unit (3700X600X760mm) (W X D X H) with Carcase and Openable shutters with

18mm Ply and 1.0 mm laminate on both the sides, Internal dividers from 18mm Ply with 1) providing and installing Hinges

Provide and install 8 openable shutters fixed to 18mm carcase with 2 Onsys 4447i Silent Hinge- 9.5 Crank Door Hinge with

Rupees Forty Six Thousand Two

108 Mounting Plates & Cover Caps each shutter , Handles 2) Godrej Multipurpose lock etc. Complete with 1 handle of 100mm ss 1 Nos 46,207.50

Hundred Seven and Fifty Paise

Brush finish Handle from Kitch/Tune or equivalent make. Top of storage to be finished with 25mm thick counter top and 1.0mm

thick solid core laminate matching with side table and work table rates are inclusive of all material 0.5sqm of Solid Surface of

approved make -12mm thick upto 1sqm, labour. (Storage-3) (File Rack / floor standing Storage)

Supply of Visitor Chair following features 1) Mid Back 2) Mesh Back 3) Height Adjustable 4) Movable -Subject to approval from

109 10 Nos 2,020.00 Rupees Two Thousand Twenty Only

Tendering Authority/ Architect

Supply of Office Chair following features 1) High Back 2) Mesh Back 3) Height Adjustable 4) Movable -Subject to approval from

110 26 Nos 5,050.00 Rupees Five Thousand Fifty Only

Tendering Authority

Supplying & Providing 12 SEATER Conference Table having overall dimensions: 3000mm X 600mm X 1000 mm (Wx Bx H) mm of

table top made from 25mm thick block board of approve make. Top surdace to be finished with 8mm solid surface such as Rupees Eighty Four Thousand Eight

corean of approved texture and color- Bended, Moulded, cut, as per direction of site incharge. Verticle surface to be finished Hundred Forty Only

with 1mm thick laminate of approved make. 18mm BWR ply to be used for vertical supports and carcas.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supplying & Providing Single Bed with Bed End having size of Overall Size :Length - 2053.0 mm Width - 900.0 mm Height -

1134.0 mm and 450mm X 1875 mm X 1134 mm Material:Bed Structure consist of metal frames made of M.S. 25 mm Square

Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness.Partition panels and plinths are made of 25 mm Thick

Prelaminated Particle Board. Head board and Tail board are made of 25 mm thick P.V.C. membrane pressed MDF.Side board

Rupees Ten Thousand Six Hundred Five

112 Mattress panels and Drawer panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges 6 Nos 10,605.00

edge banded with 2 mm thick PVC edge banding.Construction :Knock Down construction.Packets :1 Bed in 6 packets.Finish :PVC

membrane pressed MDF of Head Board and Tail board is in Darkchocolate finish18 mm thick Prelaminated Particle Board is in

Colarain Shade. Metal frames are powder coated in shade Matt Black to the thickness of 50 microns(+-10).

Approved Make: Godrej / Sujako/ Natuzzi/ Stanley/ Ashley

Supplying & Providing bed side table having size of 600mm X 600 mm Material : 1. Body Penals are made of 18 mm thick

prelaminated particle board 2. Drawer front are made of 18 mm thick prelaminated board 3. Drawer Bottom are made of 9 mm

thick prelaminated particle board 4. All exposed edges are banded with 0.8 mm thickness of edge banding . Hardware : Rollers

Rupees Two Thousand Five Hundred

113 slides , hinges , minifix and wooden dowels are made of hittich .Finish : 18 mm thick Prelaminated Particle board in imperial 2 Nos 2,525.00

Twenty Five Only

Oak. Metal frames are powder coated in metallic silver grey shade of thickness 50 microns (+/-10mm) .Lamination : MIP

(Melamine Impregnated Paper) on PLB .Construction : Knock Down

Approved Make: Godrej / Sujako/ Natuzzi/ Stanley/ Ashley

Supplying & Providng Wardrobe having 1100 mm(W) x 600mm(D) x 2100mm(H) (Height without leveler). Construction &

Material-Aesthetically appealing Slimline, completely knock down construction. Removable Skirting to cover integral legs. Legs

fitted with screw type leveler Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door Steel Hinged Door.

Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way

Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ . Fixed Half locker

on RH side Hinged Door 2 way Cam lock with Knob type handle Shelving: • Model 4S • Height wise Adjustable Shelf Mounting • Rupees Seventeen Thousand Six

4 Nos. Of Full Adj.Shelves • Model 2SH • Height wise Adjustable Shelf Mounting • 2 Nos. Of Full Adj.Shelves • Locker Model ‘H’ Hundred Seventy Five Only

– • Top fixed full shelf • Adjustable Half Shelves – 1 no. on RH & 2 nos. on LH side of Vertical Partition. Hanging Rod Model 2SH

1 no. Full length Hanging rod below top shelf mounted on Snap-on type plastic brackets. Locker Model ‘H’ 2 nos. half length

Hanging rods – one on Left half of partition below top shelf & another on Right half below locker – both mounted on Snap-on

type plastic brackets 9. Finish: Epoxy Powder coated to the thickness of 50 microns (+-10). Approved Make: Godrej / Sujako/

Natuzzi/ Stanley/ Ashley

Supplying & Providng Wardrobe having 2000 mm(W) x 600mm(D) x 2100mm(H) (Height without leveler). Construction &

Material-Aesthetically appealing Slimline, completely knock down construction. Removable Skirting to cover integral legs. Legs

fitted with screw type leveler Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door Steel Hinged Door.

Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way

Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ . Fixed Half locker

on RH side Hinged Door 2 way Cam lock with Knob type handle Shelving: • Model 4S • Height wise Adjustable Shelf Mounting • Rupees Twenty Six Thousand Fifty Eight

4 Nos. Of Full Adj.Shelves • Model 2SH • Height wise Adjustable Shelf Mounting • 2 Nos. Of Full Adj.Shelves • Locker Model ‘H’ Only

– • Top fixed full shelf • Adjustable Half Shelves – 1 no. on RH & 2 nos. on LH side of Vertical Partition. Hanging Rod Model 2SH

1 no. Full length Hanging rod below top shelf mounted on Snap-on type plastic brackets. Locker Model ‘H’ 2 nos. half length

Hanging rods – one on Left half of partition below top shelf & another on Right half below locker – both mounted on Snap-on

type plastic brackets 9. Finish: Epoxy Powder coated to the thickness of 50 microns (+-10). Approved Make: Godrej / Sujako/

Natuzzi/ Stanley/ Ashley

Supplying & Providing Center table having size of 1200mm X 900 mm Material : Frame materia - MS Bright bar and MS pipes-

Rupees Three Thousand Eight Hundred

116 powder coated with approved shade . Table Top with 18mm Ply top with approved color and make laminate . Laid on support 2 Nos 3,838.00

Thirty Eight Only

frame with silicon bushing.

Rupees One Thousand Five Hundred

117 Providing and fixing Alcane make outdoor chair complete as per drawing and as directed by architect 6 Nos 1,515.00

Fifteen Only

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and fixing Garden Table of Alcane make having 450 mm dia X 750 mm height at open terrace area completed as per Rupees Three Thousand Five Hundred

drawing and as directed by architect in-charge. Thirty Five Only

2 Seaster Sofa

2-seater sofa (Size: 2000mm L.) Providing and supplying the 2 seater sofa as per aproved as per engineer in charge. The seat and

back shall be made out of 18mm thk. plywood in a box form. It shall be coved with 100mm & 50 mm thk. 32 density U foam in

Rupees Twelve Thousand One Hundred

119 seat & back respectively. this should be again covered with 14mm thk. 32 density U foam with madarpat cover on it & 5 Nos 12,120.00

Twenty Only

upholstered of suggesed shade & finish in seat & back on all open visible sides with basic rate Rs. 400/ - per meter (Minimum

Rate) . It will have upholsted handle all materials and labour etc. complete as per instruction of engineer-in charge. The rate

shall include all materials, hardware and labour etc

Providing and Fixing MS grill made from 12mm square bright bar fixed to window jamb with approved make of fastner. Welded Rupees Nineteen Thousand Six Hundred

and moulded as per design. Powdercoated with approved shade by site incharge and architect Ninety Five Only

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable, necessary Rupees Eight Hundred Twenty Two and

PVC drain pipes for Split AC machine up to 4 TR capacity Fourteen Paise

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit

with fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected

Rupees Fifty One Thousand Sixty Two

122 evaporating unit and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote 3 Nos 51,062.57

and Fifty Seven Paise

control ( 3 star and above of current year) with necessary core cutting. (C) for 2 ton capacity Note :- Premium category:O-

General, Mitsubishi electric

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC Rupees Forty Five Thousand Nine

pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with Hundred Eighty and Twenty Five Paise

necessary core cutting. (2)For 4/5 Star Rating of current year (B) for 1.5 ton capacity- Premium Cat. Note :- Premium category:O-

General, Mitsubishi electric

Supplying and installing MS angle , powder coated / Painted standard type of wall/floor stand mount for outdoor unit of split

Rupees One Thousand One Hundred

124 AC of following capacity, erected with necessary hardware materials as directed. (A) 25mm*25mm*3mm thick M.S angle 8 Nos 1,113.02

Thirteen and Two Paise

suitable for upto 2 TR. Capacity of ac machine

Rupees Seventy Seven and Seventy

125 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation. (D) 25 mm dia. 506 Rmt 77.77

Seven Paise

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Rupees Six Hundred Thirteen and Seven

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage Paise

with provision for Plane front frame with translucent cover fixed to housing complete.IP20 (iv) 18 to 20 watts, 8" x 8", Surge-

KV Cat-III Brand as- Approved By architect

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to

Rupees Four Hundred Sixty Six and Sixty

127 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency 34 Nos 466.62

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20 (iii) 12-15

watts, 6" x 6", Surge-2 KV Cat-III Brand as- Approved By architect

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to

Rupees Two Hundred Twenty and

128 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency 50 Rmt 220.18

Eighteen Paise

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable Driver complete Cat-

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to Rupees One Thousand Three Hundred

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency Sixty Seven and Fifty Four Paise

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (F) Spot Light 425 Lumens, Surge-2KV (ii) 8 to 11 Watts Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to Rupees Three Hundred Twelve and Nine

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency Paise

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (H) Mirror Light 9 Watts, wall mounted minimum 1 feet long

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to Rupees Five Hundred Seventy Three and

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency Sixty Eight Paise

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (G) Step Light having Aluminium die cast and ABS Plastic material. (i) 5 watts, Direct/Indirect luminaire Cat-lll

Bollards: (b) LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate clear/milky diffuser mounted

Rupees Three Thousand One Hundred

132 on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with 10 Nos 3,161.30

Sixty One and Thirty Paise

required RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit

with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

Rupees Two Thousand Eight Hundred

133 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining 16 Nos 2,885.57

Eighty Five and Fifty Seven Paise

accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required. (B) 1200 mm Sweep (48") Brand Havells or equ. - Approved by Architect

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing. Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab Rupees Three Hundred Seventy Six and

with Making the site as original. Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected Seventy Three Paise

with necessary hook of 10 mm M.S. Round Bar.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame Rupees Three Hundred Fifty Nine and

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Fifty Six Paise

Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum

free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Rupees Six Hundred Twenty Nine and

Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in Twenty Three Paise

wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete CAT III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / Rupees Eight Hundred Eighteen and Ten

ceiling as per pipe erected with following type of accessories.(a) with medium class Rigid PVC pipe and accessories [III] For 16A Paise

Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat III (Air conditioner points)

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box,

Rupees Two Hundred Forty One and

138 single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with 60 Nos 241.39

Thirty Nine Paise

following type accessories Cat.III

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as directed Rupees One Thousand Eighty One and

1 no. 6A/16A universal plug-switch combined. Seventy One Paise

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Providing following type of Modular Type Accessories mounted with metallic box, single mounting base frame covered with

Rupees One Hundred Forty Four and

140 textured / metallic/ white front plate, modules erected with necessary connections as per site situation directed by Architect 12 Nos 144.43

Forty Three Paise

(1) One No. SP 6 Amp. Cat- III

Rupees One Hundred Forty Four and

141 (2) One No 5 pin plug Cat- III 10 Nos 144.43

Forty Three Paise

Rupees One Hundred Fifty Three and

142 (3) Computer RJ-45 socket /RJ-11 Telephone Socket [B] For Two Gang Cat-III 14 Nos 153.52

Fifty Two Paise

Rupees One Hundred Fifty Three and

143 (4) TV Co-axial Socket outlet Cat-III 2 Nos 153.52

Fifty Two Paise

Rupees Three Hundred Eighty and

144 (5) Electronic hum Free steps EME Fan regulator Cat-III 10 Nos 380.77

Seventy Seven Paise

Rupees One Hundred Seventy Two and

145 (9) 16 Amp. SP one way switch Cat-III 20 Nos 172.71

Seventy One Paise

Rupees One Hundred Ninety and Eighty

146 (10) 6/16Amp. Universal socket 12 Nos 190.89

Nine Paise

Rupees Twenty Four and Twenty Four

147 (7) Blank Plate Single 25 Nos 24.24

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : Rupees Two Hundred Seventy Eight and

8828 in existing box having following capacity (A) 6 to 32 Amp. Cat-III Seventy Six Paise

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & Rupees One Thousand Nine Hundred

tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed Sixty Nine and Fifty Paise

(i) 25 Amps.DP Cat-III

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA

short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility

Rupees Two Thousand Fifty Five and

150 trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. 10 Nos 2,055.35

Thirty Five Paise

completed. [d] 6A to 25 A, 4 Pole Three Phase

Providing & erecting approved make thermo plastic MCB/RCCB distribution board having modular Double door with DIN rails,

Rupees Two Thousand Three Hundred

151 epoxy powder coated finish metal frame & door assembly with Acrylic/ Plastic door, spring & hinged pins complete with 10 Nos 2,346.23

Forty Six and Twenty Three Paise

required PVC sleeved 32 / 63A copper Bus strips without MCB / RCCBs (e) Two Row 28 Module

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. Rupees Seven Hundred Twenty Four and

(N) 4 core 16 Sq. mm Item Will be paid on actual measurement Seventeen Paise

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel,

153 25 Mtr 26.26 Rupees Twenty Six and Twenty Six Paise

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (c) One

wire 2.50 sq. mm Item Will be paid on actual measurement

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

154 500 Mtr 59.59 Rupees Fifty Nine and Fifty Nine Paise

stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories (a)

wire 1.5 sq. mm Item Will be paid on actual measurement

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated Rupees Seventy Eight and Seventy Eight

stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories (b) 2 Paise

wire 2.5 sq. mm Item Will be paid on actual measurement

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Rupees One Hundred Seven and Six

colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm Item Will Paise

be paid on actual measurement

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static

Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter Rupees Twenty Four Thousand Eight

157 having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit 1 Nos 24,822.77 Hundred Twenty Two and Seventy

protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS Seven Paise

painted batteries stand, 10% Overload capacity for momentary load. (A) 1 KVA with 1Hr Backup

Rupees One Thousand Two Hundred

158 Supplying and erecting approved make surge/spike suppressor having 3 out lets of 1.8 AMP each complete erected. 1 Nos 1,284.72

Eighty Four and Seventy Two Paise

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips Rupees One Thousand Three Hundred

Including Krone Strips of approved brand(b) Suitable for 20 pair Eleven and Ninety Nine Paise

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone with one touch

Rupees Eight Hundred Ninety Eight and

160 memory (min.6 nos.)& 99 memories with display system 10 Nos 898.90

Ninety Paise

(a) Single line BEETEL/panasonic or equivalent make

161 Providing RJ-11 Cable for Telephone connection from provided EPABX to the output line as per required connections 500 Mtr 20.20 Rupees Twenty and Twenty Paise

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items Rupees Two Hundred Thirty Five and

erected with necessary connection v) RJ-11 Telephone socket cat-III Thirty Three Paise

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Rupees One Thousand One Hundred

DBs should be used of same company of MCB to be used) suitable for (b) IP-43 Fifty Two and Forty One Paise

(iii)8 way.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

Rupees Six Hundred Twenty Nine and

164 link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The 6 Nos 629.23

Twenty Three Paise

DBs should be used of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43). (i)4 way

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees Twenty Three and Twenty Three

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. Paise

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

166 300 Rmt 32.32 Rupees Thirty Two and Thirty Two Paise

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed.

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

167 200 Rmt 52.52 Rupees Fifty Two and Fifty Two Paise

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supply, installation, testing and commissioning of 3 phase 415V 4 wire Free Standing Floor mounted MV panel made out of minimum 14 SWG CRCA sheet

after seventank process and painting with Epoxy powder coating including all switchgear as detailed below. The panel having PU/Neoprene rubber gasket of

not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The

panel shall consist of suitable rating FP/TPN Aluminium- busbar-as per SLD (at the rating of 0.8ASq.mm) supported with DMC/ SMC barriers and colour

coded with Heat shrinkable sleeves. The Metering shall be provided as specified.

The panel shall have Short circuit with standing capacity as given in SLD and consist of the switchgear as mentioned below. The panel shall be mounted on

plinth, stand, etc. including all materials. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. All the Panels shall have

minimum 25% outgoing as per SLD. The earth bus shall be continuoulsy run without any jointing/welding and its Size should be per SLD. The size of all Panel

Mounting Meters shall be 96X96mm.The Panels shall be mounted on U channels including supply and fixing of the same. MCBs shall be provided for Control

purposes. (All Panels shall be extendable type only). Price shall be inclusive following: Shifting of panels from site store to the suitable location. Installation

of panel as located in electrical drawings or as per site conditions, including removing packing etc. Earthing all components, frame etc. to a common internal

earth bar. Connection, testing & commissioning. Electrical contractor shall carry out the insulation test at site & all the readings shall be submitted in copy to

the consultant or engineer-in-charge. Supply, installation, testing and commissioning all accessories, supporting structure, hard ware etc to complete the job.

Supply, installation, testing and commissioning of necessary tools, hard ware, testing hard ware, testing equipment etc. The rates for the distribution boards

Rupees Fifty Five Thousand Five

168 apart from the Breakers and instruments shall also include the following : This schedule of Quantities shall be read in conjunction with the technical 1 Nos 55,550.00

specification, General & Special conditions as well as all tender drawings. Supporting rigid steel framework. Cubicle type, 14 gauge CRCA sheet steel Hundred Fifty Only

enclosed. Proper bonding to earth. Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit

diagram. Providing cable clamps / supports within distribution boards cable alley. All MCB’s shall be of minimum 10 KA breaking capacity. The breaking

capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic releases upto 250 amps and microprocessor R&B SOR based for

250 amps and above capacity, unless specified otherwise. All motor feeders MCCBs shall be of motor duty. Distribution panels shall be Powder Coated with

Siemens gray paint shade no. RAL-7032 of IS-5. Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993. IP 4x for

all Indoor panel.

IP 65 and double door for all outdoor panel. All MCCB’s shall be provided with operating mechanism for door interlock.

All measuring instruments (Meters) shall be of digital electronic with LED of approved make.

All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

All panels shall have provision of the following: Pad locking of Switch board doors.All MCB’s used for protection of resistive and lightly inductive load shall be

type “B” characteristic and inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type D characteristic. All

incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation. SPD as shown in SLD

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus &

Rupees Twenty Two Thousand Four

169 earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber 2 Sqm 22,468.46

Hundred Sixty Eight and Forty Six Paise

gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size. (C) The standard companies switch gear shall be used and only

manufacturers as per IEC 61439 for beneficial use. (iii)with 750 mm. Depth

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT

Rupees One Thousand Five Hundred

170 operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all 3 Nos 1,584.69

Eighty Four and Sixty Nine Paise

connection, wiring etc .with manufacturers calibration certificate.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043- 1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with Rupees Seven Thousand Ninety Five and

constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of Twenty Five Paise

applications. [B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc. -Length of

Pipe : 2 mtr-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043- 1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-

Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with

Rupees Ten Thousand Five Hundred

172 constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of 2 Nos 10,593.89

Ninety Three and Eighty Nine Paise

applications [C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System (like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft

Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Annealed bare Rupees Seven Hundred Ninety Four and

Copper wire 8 to 16 SWG. Eighty Seven Paise

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel Rupees Seventy Seven and Seventy

board, Motors etc. using proper clamp. Seven Paise

Providing and erecting XLPE (IS:7098) (I)-88ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Rupees One Thousand Eight Hundred

175 with necessary clamps or in existing trench / pipe of following size of cables. (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 25 Rmt 1,863.45

Sixty Three and Forty Five Paise

(main Panel to Sub Panel

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & Rupees One Thousand Three Hundred

square frame. 250mm with 1350 RPM Cat.II Sixty Six and Fifty Three Paise

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity Rupees One Thousand Eight Hundred

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 Twenty Three and Five Paise

any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii) 15 to 24 Watts

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall

be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type Rupees Five Thousand Five Hundred

terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by Fifty Six and One Paisa

manufacturer considering site requirement. (B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long with necessary G.I. J Bolts .Approx weight 37 kg

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more than 3 H.P. Rupees Sixteen Thousand Three

179 of different range with following capacity . Lifting and Lowering taken extra. (C) (12 stage) 130 LPM discharge at 54 mtrs. 1 Nos 16,383.21 Hundred Eighty Three and Twenty One

Respectively head suitable for 50 mm dia. delivery pipe Cat.I Paise

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of Rupees Four Hundred Eighty Eight and

following Size. (F) 3 Core x 16 Sq. mm. Eighty Four Paise

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing

with 'a ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type Rupees Thirteen Thousand Fifty Three

post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed and Twenty Four Paise

with one year comprehensive maintenance guarantee.[B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of

Rupees Forty One Thousand Three

450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically

182 1 Nos 41,342.33 Hundred Forty Two and Thirty Three

sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single phasing

preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable) Rupees Thirteen Thousand One

protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage Hundred Eighty Two and Fifty Two Paise

limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high

voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be

erected on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens , BCH make only) (A) S/D up to 7.5 H.P.

Providing and fixing Polyester Based Zebra blinds with manual rolling mechanism including sheds, color as approved by Rupees Three Thousand Three Hundred

tendering authority and Architect Ninety Six and Thirteen Paise

Designing, Supply and Installation of various Signages, shown in pictures should be erected in sheet with MS sctructure ,1.50 x

0.90 of size in 5mm sheet thick , made with S.S. 304 or MS and Aluminium Composite panel with digital printing on various Rupees Four Thousand Eight Hundred

medium as per approved by EIC or architect. A single Signages may consist of all said materials. Rate is inclusive of all other Ninety and Forty Two Paise

charges like required civil work, transportation, labour, colour, wastage etc. Measurement shall be valid only for the Signages

element including the supports/installation elements.

Scaled Model:

Providing 1: 2500 Scale miniature model following actual sizes:

Installation of 2800mm X 2800mm base for miniature model from 25mm thick block board/ Ply. on a base of 2000mm X

2000mm X 1000mm (LxBxH) made from 18mm thick BWR Ply laminated with 1.0mm thick Solid Core laminate on outer side of

approved color and glossy finish. The model shall be made with all the components details of solar park including indicative

Rupees Twenty Five Thousand Two

186 solar panesl (PV Modules) with look and feel of same material, Inverters, segments, Transformers, connectors, substation, etc. 6 Sqm 25,250.00

Hundred Fifty Only

An interactive led roap light of 5mm thickness, controlled by integrated circuit of necessary specifications to indicate the flow of

energy from solar panel to substation to grid. A mockup of led indication and integrated circuit is to be eracted before final

installation. The models shall be made of Acrylic/ MDF/ Fibre/ Wood/ Plastic or any other appropriate material as may be

required to provide a realistic look of the components, designs provided by the Architect/ Consultant. Mockup on 2D paper plot

to be provided for approval from terndering authority. The model shall be covered with 8mm thk transparent Acrylic Box.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Backlight Signage: Building Top

includes design, fabrication, supply, installation, testing, and commissioning of backlit acrylic signage boards at designated

locations, as per specifications. The signage shall be of high aesthetic quality, weather-resistant, and suitable for indoor and

outdoor applications Provided with LOGO of GPCL with provided text. All components must be vandal-resistant, UV-stabilized,

and conform to IS standards or international equivalents. Signage Material for Face Panel: 3mm or 5mm thick UV-resistant cast

acrylic sheet (white/translucent) for light diffusion. Back Panel: 1.2 mm thick powder-coated aluminum composite panel (ACP)

or galvanized iron (GI) sheet. Side Frame: Aluminum extruded section with anodized or powder-coated finish. Illumination with

High-brightness LED modules (SMD type), IP65-rated. Color Temperature: 6000K (Cool White) unless specified otherwise. Power

Supply: 12V or 24V LED driver with surge protection and over-voltage cut-off. Lighting Uniformity: Uniform light diffusion across Rupees One Lac Fifty One Thousand Five

the surface, with no hot spots or dimming. Text and logos to be laser-cut or CNC-routed from translucent acrylic film (like 3M Hundred Only

or LG). Vinyl graphics (if used) must be UV-printed or plotter-cut, with 5+ year outdoor durability. Size of letters - (Height

185mm - 30 letters ) Size of Logo 1180 X 1350 - W X H Installation- Mounting to be done using SS studs, anchor fasteners, or

aluminum brackets, ensuring stability and alignment. All wiring shall be concealed in PVC conduit or aluminum raceways.

Signage must be securely grounded to prevent electrical hazards. Perform testing for Electrical safety and earthing

Luminance uniformity, Color matching, Weatherproofing and vibration resistance. approval form tendering authority will be

required for Detailed drawings and mock-ups of proposed signage. ample materials (acrylic sheet, LED module, vinyl, etc.

Compliance certificates for LED modules and fire-retardant materials. Minimum 2 years warranty and 1 year onsite

maintanance post installation.

Signage: Watch Tower Top

The scope of work includes the design, fabrication, supply, installation, testing, and commissioning of a non-backlit signage board illuminated

using external focus lighting, to be installed at designated locations such as the Watch Tower Top, as per approved drawings and

specifications. The signage shall be of high aesthetic quality, durable, and capable of withstanding outdoor environmental conditions including

UV radiation, moisture, and wind loads. The signage will include the GPCL logo and designated text, fabricated using high-grade materials that

conform to IS standards or equivalent international specifications. The face panel shall be constructed from exterior-grade aluminum

composite panel (ACP), depending on the design intent. All visible surfaces shall be finished with weather-resistant paint or covered with UV-

printed or plotter-cut vinyl graphics using branded materials such as 3M, Avery Dennison, or LG, rated for a minimum of 5 years of outdoor

durability. The logo shall measure approximately 1400mm (W) × 1650mm (H), and the lettering shall be 220mm in height, with around

characters in total. Graphics and text shall be laser-cut, CNC-routed, or printed for precision and clarity. The signboard structure shall include a

rigid frame made of aluminum extruded profiles or MS sections with powder coating, ensuring robustness and clean edge detailing. Rupees One Lac Twenty Six Thousand

Illumination shall be achieved using high-efficiency outdoor-rated LED focus lights installed above or below the signage. Each fixture shall be Two Hundred Fifty Only

IP65-rated, made of die-cast aluminum with integrated heat sinks, and fitted with isolated LED drivers. The color temperature of the lights

shall be 6000K (Cool White), unless otherwise specified. A minimum of 3 to 4 luminaires per signage board shall be used to provide even and

glare-free illumination. Each light shall be mounted using adjustable swivel brackets for optimal coverage, and all associated electrical wiring

shall be concealed using PVC conduit or aluminum raceways. Proper earthing and surge protection shall be provided for the entire system.

The signage shall be mounted using stainless steel studs, anchor fasteners, or aluminum brackets, with installation ensuring accurate

alignment, stability, and wind resistance. Prior to fabrication and installation, the contractor must submit detailed shop drawings, lighting

layouts, and mock-ups for approval by the tendering authority. Material samples of acrylic, ACP, vinyl film, and lighting fixtures must be

submitted along with manufacturer’s compliance certificates. The installed signage shall undergo testing for structural stability, lighting

uniformity, color accuracy, weatherproofing, and vibration resistance. A comprehensive warranty of minimum two years shall be provided for

the signboard and lighting system, along with one year of onsite maintenance support post-installation.

LANDSCAPE WORK

Excavation for foundation by mechanical means up to 1.5mt. depth including backfilling, shoring, strutting dewatering as Rupees Six Hundred Fifty Six and Fifty

necessary, sorting out and stacking of useful materials and disposing of the excavated stuff with all lead and lift etc. Completed Paise

(A) Loose or soft soil.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade and sun loving),

including excavating the soil to a depth of 450mm of required area as per plant species, removal of excavated earth to directed Rupees Two Hundred Twenty Two and

location, filling the excavated bed with approved soil mixture, planting the approved variety plants, providing strong stack etc. Twenty Paise

as per specification and as directed complete in all respect, including watering and nurturing the plants.

I) Furcaira variegated well developed with fresh & healthy foliage 8 to 10 leaves in 30 cm Earthen Pot

191 30 Nos 40.40 Rupees Forty and Forty Paise

II) Acalypha red well developed with fresh & healthy 30 to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic Pot

Rupees Three Hundred Eighteen and

192 III)Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy 20 Nos 318.15

Fifteen Paise

plant in full bloom 75 to 90 cm ht. plant in 40 cm Cement Pot

193 25 Nos 45.45 Rupees Forty Five and Forty Five Paise

IV) Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm

194 50 Nos 50.50 Rupees Fifty and Fifty Paise

V) Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pot of size 20 cm

195 180 Nos 30.30 Rupees Thirty and Thirty Paise

VI) Clerodendrum splendens of height 30 cm to 45 cm. in 20 cm size of Earthen pot/Plastic pot

196 VII)Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of 100 Nos 20.20 Rupees Twenty and Twenty Paise

Earthen Pot/Plastic

Shrubs: Rupees One Hundred Eighty One and

VIII) Dreaceana pendanus, well developed, having 6 to 8 suckers with helthy foliage in 25 cm size Earthen pot /Plastic po Eighty Paise

198 120 Nos 20.20 Rupees Twenty and Twenty Paise

IX) Chlorophytum-variegated, full of leafy suckers in 15 cm size of Earthen Pot / Plastic Pot

199 100 Nos 20.20 Rupees Twenty and Twenty Paise

X) Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot

Ground Cover:

Providing, planting and developing ground covers with the approved variety of plants including excavating the existing soil to a

maximum depth of about 300 mm, removal of excavated earth to directed location, dressing the soil in proper slopes, filling

Rupees Four Hundred Twenty Four and

200 excavated bed with approved soil mixture, planting approved quality grass, including weeding out and removal of foreign 10 Nos 424.20

Twenty Paise

matter, watering etc complete.

Cynadon dactylon; c/c distance as per carpet effect

I) Vinca minor; Periwinkle; as per area mentioned - Bed- 100 Plants

Ground Cover:

201 200 Nos 20.20 Rupees Twenty and Twenty Paise

II) Ophiopogon japonicus; Turflily; as per area mentioned

Ground Cover:

202 300 Sqm 20.20 Rupees Twenty and Twenty Paise

III) Setcreasea purpurea full of variegated leaves in 15 cm size of Earthen Pot/ Plastic Pot

Percolation well : 1) Boring and Sinking 30 cm. diameter percolation well reverse rotary drilling system including excavation

and refilling mud pit, pre and post site cleaning etc. complete and thereafter withdrawal and removal of the Derrick etc.

complete. 190mt. depth 2) Supplying, fixing and lowering 20 cm diameter PVC strainer pipes having slot size 2 mm to suit the

size of water bearing coarse sand to the required depth as per direction of the engineer 3) Washing and developing the tube Rupees Four Lac Twenty Seven

203 well with the air compressor (900 cfm/ 200 psi) with drop line washing with every water bearing zone upto bottom level till 1 Nos 4,27,506.79 Thousand Five Hundred Six and Seventy

sand free water. 4) Making Rain water Harvesting pit 2mtr x 2 mtr x 2.5mtr deep with 35 x 35 cm dry brick honey comb Nine Paise

perforated brick work with manhole covers etc. complete as per standard design Rate shall be inclusive of all material, labour,

equipment, consumable and all type of filling material like Graval/ metal/ sand in Rain water Harvesting pit etc as per drawing

and as directed by Engineer in charge.

Charanka , Taluka: Santalpur, Dist. Patan, Gujarat.

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supply & Installation of 4.5 kg CO2 High Pressure Portable Fire Extinguisher of approved make, filled with Co2 Gas as per IS

15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed

Rupees Seven Thousand Seven Hundred

204 discharge of CO2, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, External coating is of enamel spray 1 Nos 7,777.00

Seventy Seven Only

painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction bearing ISI mark, Body

confirms to IS 7285, Extinguishers confirmed to IS 15683:2018 and ISI maked [A] For 4.5 Kg Capacity - with 2 year AMC

Supply & Installation of 6 Kg ABC Type Fire Extinguisher of approved make with Mono Ammonium Phosphate Powder 50%

confirms to IS 4308, Stored Pressure Type, Pressure Gauge, Controllable discharge mechanism & required range & discharge,

Rupees Ten Thousand Two Hundred

205 applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Mig welded, EPDM Rubber Hose 1 Nos 10,201.00

with both end clamped, Internal Coating & External Coating, valves with safety Pin is of SS material, ISI Approved IS 15683:2018

and ISI maked.[B] For 6.5 KG Capacity - with 2 year AMC

Tender Value In Words

Rupees Two Crore Thirty Nine Lac Twenty Nine Thousand Seven Hundred Ten and Twenty Five Paise

I/We am/are willing to carry out the work at…% above/below percent (Should be wri en in figures and words) of the es mated rate men oned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words___________________________________ In words_______________________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in

4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender