Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | Rejected-Technical 673639 | MALAPPURAM | KERALA | 673639 | - | Rejected-Technical Reject |
Tender Value
₹3.0 L
EMD Value
₹7,411
Closing Date
9 Oct 2024, 3:00 pmClosed
ASSISTANT EXECUTIVE ENGINEER
PWD BUILDINGS SUBDIVISION, PERINTHALMANNA
GENERAL-Judicial quarters Perinthalmanna-Running contract-Periodical maintenance to Judicial quarters I at Perinthalmanna in Malappuram district -General Civil Work
2024_PWD_693485_1
6671/2024-2025
Open Tender
Civil Works - Buildings
Item Rate
365 days
PERINTALMANNA
Please refer Tender documents.
9 documents required · 9 mandatory
₹655
Yes
₹7,411
Yes
26 Dec 2024
1 Oct 2024
11 Oct 2024
1 Oct 2024
9 Oct 2024
1 Oct 2024
Amount
AC sheet over RCC roof- changing to GI sheet
OD44332/2024-2025:Dismantling roofing and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet(Ref item no.15.28.2)
OD39707/2024-2025:Steel work in built up GP tubular sections (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(adopted item code- 10.16.3)
OD39705/2024-2025:Steel work for purlin/single section with G P pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (adopted item code-50.10.2)
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
OD39708/2024-2025:Supplying and fixing 200mm PVC half cut section (Euro guard or similar) pipe for rain water collection including all cost of materials and labour charges etc complete.
50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
Plumbing& Premonsoon works
OD128810/2024-2025:Dismantling of Europian type Water closet including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead adopted item code-15.52
17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
OD44389/2024-2025:Providing and fixing stainless steel short body tap
50.2.33.6:Cutting branches of trees overhanging above any structures of girth between 60cm to 90cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete
OD44388/2024-2025:Engaging coolie
RASHID KK
Bidder Name
sainulabid
RASHID KK
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .