SPL REPAIR OF EXISTING SHED OF OLD TACAN RADAR TO POL STORE OF GCA SECTION, SPL REPAIR TO BASE OPS COMPLEX ORP 11 GCCR and STANDBY TWCC AND SPL REPAIR TO CCD PAINTING ON INTERNAL WALLS OF CERTAIN BLAST PENS AT AF STATION BAREILLY.

Amount

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for 15mm thick cement plastering in CM (1:4) mixed with liquid WPC @150ml per bag by weight of cement, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. Note:- Liquid Water Proofing Compound shall be measured and paid seperately under respective item of BOQ.

Taking down to chowkhats or frames with shitter (without taking off shutters from the frames) area n exc. 1.5 sqm each complete all as specified and as directed.

Taking down to chowkhats or frames with shitter (without taking off shutters from the frames) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed.

M & L for rendering 15mm thick on other than fair faces in CM (1:4) of brick work or concrete surfaces, surface finish even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for non - skid cermic coloured joint free tiles of 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer of CM (1:4) over and including 25mm thick PCC (1:2:4) type B0 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles of 7 mm thick as in vertical surface of size (300x 450)mm, jointed in neat cement slurry and pointed in white or colour cement over and including 10mm thick cement plaster in CM (1:4) to match complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in path/ plinth protection and finished the surface fair & even complete all as specified and as directed.

M & L for chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors with grey cement to match, with and including 15mm thick screed bed with CM (1:6) complete all as specified and as directed.

S & F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

M&L for sheet glass, 4mm thick ordinary quality and glazing with oil putty/rubber beading in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 10m thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and as directed.

Taking down of cement plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surface etc complete all as specified and as directed.

S & F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification etc complete all as specified and as directed.

S & F 5.5mm thick frosted on one side glass fixed with rubber washer, beads, glazing, screws etc complete all as specified and as directed.

S & F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L for 10mm thick plastering in CM (1:6) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) white excluding flushing cistern and flush pipe including white plastic seat cover back closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F 10 litres, PVC valveless syphonic action type, dual type flushing cistern, low level, with inlet, ball valve, float, and brackets complete all as specified and as directed.

S&F vitreous china counter wash basin, oval type, white, with brackets with and including fixed on 20mm thick granite slab and moulding three sides complete all as specified and directed.

S&F shelf (Soap dish) of PTMT fixed with and including CP brass screws and wooden/ plastic cleats (Min weight 300 gms) complete all as specified and as directed.

S&F waste coupling of cast copper alloy CP 32mm size complete all as specified and as directed.

S&F cast copper alloy CP grating flat round 1.6mm thick complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor and complete all as specified and directed.

Description all as per srl item No. 30 but 20mm bore complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of capacity 1000 liters (cylindrical vertical with closed top), triple layered, hoisted and fixed in position with and including GI over flow pipe 20mm dia, GI washout pipe, anti mosquito cap etc complete all as specified and as directed.

S&F 20mm bore CP fancy type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

M&L for 75mm PVC pipe floor taps round shaped doom type, AISI-304 (including jointing with solvent cement) complete all as specified and as directed.

S&F 15mm dia fancy type chromium plated bib taps, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F PTMT hinges of dimension 100mm complete all as specified and as directed.

S&F aluminium handles, cast type, anodised of size 100mm complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of of aluminium alloy etc complete all as specified and as directed.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F aluminium powder coated grill of weight not less that 1.5 Kg/Sqm fixed to aluminium frame with aluminium powder coated beading up to 10 mtr height building complete all as specified and as directed.

M & L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete up to 10 mtr height building all as specified and as directed.

M & L seamless calcium silicate ceiling made out of (1800 x 1200) mm size board calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish complete all as specified and as directed. Note:- Frame work for ceiling shall be measured and paid separately under respective items of BOQ.

M&L for rewriting or repainting letters and figures (Block, Roman or Itallic or Indian) not exc 30 cm height with synthetic enamel paint complete all as spefied and as directed.

M & L for flame proof point wiring for one light point / fan point / 5 Amp socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) in colour coding drawn into and including ERW mild steel stove enamelled rigid steel conduit having wall thickness not less than 1.60 mm and dia not less than 25 mm with and including flame proof fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing specifications and sunk cast iron or 1.2 mm thick pressed steel flame proof terminal box including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed. Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.

All as per item No 48 here-in-before but with copper conductor 2.5 sqmm for one 3/5 pin socket outlet, 16/25 Amps on independent board complete all as specified and as directed.

S&F LED light fitting 1 x 20 W Flame proof type FLP-WP, IP-65 protection made of aluminium alloy LM6 complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make :- Crompton Model No EXTN1LT8-16/20W or equivalent in Sudhir/ Shyam/ Baliga.

S&F flame proof exhaust fan 457mm sweep (18 inch), 1440 RPM, 230 Volts, single phase, 50 Hz, AC supply totally enclosed heavy duty motor of capacity 0.33 HP with die cast aluminium rotor mounted on two ball bearing complete with louvers including cutting chases for fixing fan, connecting electrically using 3 core 0.5 sqmm PVC insulated FRLS flexible copper conductor cable overall sheathed all as required at site with connected accessories etc complete all as specified and as directed. Make:- Cat Pat No EF/140 of make Sudhir or equivalent in Crompton/ Shyam/ Baliga. Note :- Flexible copper conductor cable shall be covered with flame proof flexible pipe.

S&F flame proof wall mounting fan 415mm sweep (16 inch), 1440 RPM for speed and oscillation motor, complete fixing arrangement on wall and connecting electrically using 3 core 2.5 Sqmm PVC insulated FRLS flexible copper conductor cable overall sheathed all as required at site with connected accessories etc complete all as specified and as directed. Make:- Cat Pat No WMF/140 of Sudhir or equivalent in Crompton/ Shyam/ Baliga.

S & F flame proof, weather proof directly entry type rotary switch with cable terminal box in cast aluminium alloy LM-6 enclosure epoxy powder coated single pole 230 volts 16 Amp ON / OFF switch AC certified by CRMI for group II-A & II-B including compression glands complete all as specified and as directed. Make:- Sudhir/ Baliga/ Shyam.

S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16 Amp 4512.60p, 250V, 2P + earth complete all as specified and as directed.

Supply, laying & testing of LT cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross sectional area 10 Sqmm 2 Core complete all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be measured and paid seperately.

Supply and laying/fixing GI tubing light grade with all fittings and fixed complete laid in trenches /floor/wall for cable protection of size 40mm dia complete all as specified and directed.

S&F flush mounting factory made Ekinoxe SPN DB's Double door, IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated bus bar 4 way with 200 Amps rated bus bar complete all as specified and as directed.

S&F MCB SPN 240 volts, 32 Amps breaking capacity 10 KA, ‘C’ Series. etc complete all as specified and as directed.

S&F MCB SP 240 volts, 6-32 Amps, 50Hz, 10 KA, ‘C’ series complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL as protection pipe, excavation and earth work charcoal dust, common salt, PCC (1:3:6) type C-1 chamber with cover and RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point complete all as specified or indicated including testing on completion all as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in hard/dense soil for laying of cables complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed. Note:- Only punned thickness shall be measured and paid.

M&L for well burnt sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and as directed.

M & L for earthing complete with copper plate (60×60)cm ×3.15mm thick electrode and (20×3)mm copper strip as earthing lead buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level by means of brass nuts/bolts and washers, check nuts and washer including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcoal dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 40mm up to 7.5 m shall be included in cost of above item.

S&F single pointed air termination copper rod 12mm dia, 300 mm long with all connected accessories and PCC block of suitable size complete all as specified and as directed.

S & F test point terminal block made of gun metal or phosphorous bronze of size (75x75x25)mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw complete all as specified and as directed.

M&L for GI tubing medium grade including necessary fittings of size 40 mm, laid in trenches /fixed with wall as in mechanical protection to copper strip complete all as specified and as directed.

S&F copper strip 20mm x 3mm complete with saddles and fixing screws for fitting the strip complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. Note:- Credit for above items shall be made as per conditions separately.

Taking down old sub main copper/aluminium cable of various sizes from existing conduit/ batten complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site requirement in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade earth continuity wire including MS sunken pressed steel terminal boxes of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover complete for the following all as specified and as directed. Make :- Grandlay, Havells, RR Kable (a) for one light/ fan point controlled by one way switch

(b) For one 3 pin socket outlet, 5/6 amp on independent board complete all as specified and as directed.

(c) For one 3 pin socket outlet, 5/6 amp on same board complete all as specified and as directed.

M&L for point wiring complete with 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site requirement in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts gradeas earth continuity wire including MS sunken pressed steel terminal boxes of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover for one 3 pin 15/16 Amp socket outlet on independent board complete all as specified and as directed. Make :- Grandlay, Havells, RR Kabel. Note for Srl item No. 73 to 76:- Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.

S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE (Five star rated) with brushless direct current motor (BLDC) complete with and including taking down old unserviceable ceiling fan and depositing the same in MES store yard complete all as specified and as directed. Make :- Usha Striker Galaxy, Havells Fusion or equivalent make.

S&F air circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting single phase, 230 volts AC, 50 Hz, metallic body (Heavy Duty) complete with pull cord control for speed and oscillating mechanism, necessary mounting arrangement and making electric connection using three core flexible twisted copper conductor of size 23/0.0076 complete all as specified and directed. Make :- Usha, Orient, Havells.

S&F recess mounted LED light fitting 1' x 1', Ultra sleek recessed downlight for low height false ceiling in square profile, General purpose square shaped luminaire with low height CRCA housing and high transmitivity diffuser suitable for office application with diffused acrylic cover complete with all accessories and making connection by using suitable length of three core flexible copper cable of size 23/0.0076 of 36W, including taking down of existing light fitting etc complete all as specified and as directed. Make :- Philips Cat Part No - DN097B LED10S-6500 PSU WH or equivalent of Havells, Wipro.

S&F recess mounted LED light fitting 2' x 2', 36 Watt, Smart Glow, General purpose square shaped luminaire with low height CRCA housing and high transmitivity diffuser suitable for office application with diffused acrylic cover complete with all accessories and making connection by using suitable length of three core flexible copper cable of size 23/0.0076 of 36W, including taking down of existing light fitting etc complete all as specified and as directed. Cat No. RC383B LED 36S-4000 PSU OD WH PIR of make: Philips/ Cat No. DROPDOWNFLAT 2X2PLR36WLED840S of make: Havells/ Cat No. CRCO10R038HP57GL1 of make: Wipro

S & F wall/surface mounted type LED light fitting batten type complete with LED lamp 1x 20 - 24 watt (4 feet long), extruded aluminium heat shrink provide for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable, including taking down of existing light fitting etc complete all as specified and as directed. Make: Philips Cat No: BN 021 LED40S- 6500 PSU GR or Wipro Cat No. LL20-281-XXX-65AL1 or Havells Cat No. ENDURALINEARNEOBS20WLED 865SPCWH.

S&F LED Bldg Street light fitting 35 W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source 1 x 35 Watt, LED 6000K, complete with all accessories internally pre-wired complete all as specified and as directed. Cat No. BRP046 LED 39 CW MR S1 PSU GR of make: Philips/ Cat No. ENDURAPEARLNEO SL40WLED757PASYTOPC of make: Havells/ Cat No. LR02-451-XXX-57-G1 of make: Wipro

S & F LED Bulk head Fitting including 1x10 watt luminaires Pressure die cast housing with IP 66 protection and IK 09 Impact resistance suitable for surface and wall mounting applications complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable, including taking down of existing light fitting etc complete all as specified and as directed. Make:- Philips Cat No WT202W LED6S NW PSU S2 PC or equivalent make of Havells, Wipro

S&F LED Lamp 12 Watt complete all as specified and as directed. Make :- Crompton, Wipro, Philips, Havells, Osram.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with a single pole MCB 20 Amps complete in sheet metal enclosure complete all specified and directed. Make :- Legrand, Havells, ABB

S & F of 1100 volts grade heavy duty two single core 4 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. Note:- (a) Two single core cable alongwith one single core of earth wire and PVC conduit shall be measured and paid as one unit length. (b) M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate. Make :- Grandlay, Havells, RR Kabel

S&F for flush mounting factory made TPN DBs Double door, IP-43 protection - IK 09 with metal door with neutral busbar, earth bar cables ties for cable management fully insulated busbar 4 Way etc complete all as specified and directed. Make :- Legrand, Havells, ABB

S&F MCB Triple pole and neutral, 415 Volts, 63 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and as directed. Make :- Legrand, Havells, ABB

Supply, laying & testing of LT cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area 25 Sqmm 4 Core complete all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be measured and paid seperately.

S&F ceiling rose, surface bakelite, (65 x 50)mm, three terminals complete all as specified and as directed. Make :- Anchor, Havells, Cona

Supply and fix switch piano flush type single pole one way 5/6 Amp complete all as specified and directed. Make :- Anchor, Cona, Havells

Supply and fix socket outlet 2 in 1, 3 pin, 5/6 & 15/16 Amp flush type complete all as specified and as directed. Make :- Anchor, Havells, Cona

Supply and fix socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and as directed. Make :- Anchor, Havells, Cona

Supply and fix switch piano flush type single pole one way, 15/16 Amp complete all as specified and directed. Make :- Anchor, Havells, Cona

S&F Rotary type electronic fan regulator 5 Step AC, 230V, Single phase, complete all as specified and directed. Make :- Anchor, Havells, Cona

S&F Street Light bracket made of light grade GI pipe 32 mm bore and 1.20mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 3mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed. Make :- Tata / swastik/ Jindal/ prakash.

M/S Quality Constructions