Extension of HT Line through 11 KV UG cable along with installation of 1X63 KVA DT for providing service connection to DTW Scheme

Amount

(SUPPLY)

Supply of 11 KV 3 ph GOS Complete Set (i/c the cost of back clamp, nuts & bolts etc.) with all necessary Connection.

Supply of 11 KV DOF 3 ph including all necessary connection complete as per technical specification.

Supply of 9 KV , 5 KA LA single pole metal oxide gapless surge type lighting arrestor i/c necessary connection complete with all accessories as per technical specification.

Supply of 11 KV 3 core ,95 sqmm XLPE insulated Aluminium conductor UG Cable in the ground i/c excavation, sand cushioning, protective covering and refilling the trench etc as reqd.Trench size:Width:350mm, Height:1200mm/sand cushioning: Height :250mm,Width:350mm/ Protection:Double layer brick

Supply and making Outdoor Heat Shrink type End termination jointing Kit for XLPE insulated Cable of grade 11 KV,3 core 95 sqmm

Supply and making Outdoor Heat Shrink type straight through jointing Kit for XLPE insulated Cable of grade 11 KV,3 core 95 sqmm

Supply of 100X50X50X6mm MS Channel Bracket(ODC115)

Supply of 75X40X40X6mm MS Channel Bracket(ODC114)

Supply of 2.8 mtr long 65X65X6mm MS angle Bracket

Supply of 11 KV pin insulator with G.I. pin (TSECL Supply)

Fabrication of MS Channel/Angel

Supply of 100 Amp Cutout(Extended Type)

Supply of Bimettalic Lugs 95 sq.mm

Supply,erection and commissioning of double door LT metering KIOSK box of size 1250mmX1040mm X450mm made of 2mm MS Sheet on 5X50X6mm MS angle structure bus bar made of copper strip of size 500mmX50mmX6mm with with locking system and painting for LT metering purpose i/c fitting fixing of cut outs cable and other related works complete with CC grouting of KIOSK legs and as per approved design of TSECL.

1/2" dia PVC pipe for earthing

Supply of Bracket Clamp as per specification

Supply Stay of Clamp as per specification

Supply of 75 mm dia P80,PN6,HDPE Pipe, Wall thikness : minimum 3.7 maximum 7.2 mm of different length as per engineering requirement including laying of XLPE cable through HDPE pipe above ground level for riser/road crossing to Pole and other places where required etc as required and fitting fixing of pipe to pole with the help of Crossarm, Clamp, Nuts & Bolts. (a) Laying of HDPE pipe along with all accessories like socket ,bend,couplers etc

Carriage of the following:

Carriage of 9mtr. Long PCC Poles by mechanical Transport from Sub-Division store to working site Vis-à-vis including loading,unloadig and stacking as required.

Carrying of the following items from Store Sub-Divisional store yard to work site by mechanical/ mannual/ handcart carriage as reqd (a) Carriage of Line materials such as cable, ACSR, G.I. Wire Cross-Arm, Stay Set, insulator etc. By Mechanical Transport from A.D. Nagar Store Sub-Division to Sub-Division office, Sub-Division office to work site.

(ERECTION)

Erection of 9 mtr length of PCC Pole at any kind of soil upto a depth of 1/6th of pole height, i/c excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of 11 KV 3 ph GOS Complete Set (i/c the cost of back clamp, nuts & bolts etc.) with all necessary Connection.

Erection of 11 KV DOF 3 ph including all necessary connection complete as per technical specification.

Erection of 9 KV , 5 KA LA single pole metal oxide gapless surge type lighting arrestor i/c necessary connection complete with all accessories as per technical specification.

Laying and stringing of 1KM(Single Conductor) ACSR(6/1/2.59) mm dia WEASEL i/c hoisting & binding etc complete as required.

Laying of 11 KV 3 core ,95 sqmm XLPE insulated Aluminium conductor UG Cable in the ground i/c excavation, sand cushioning, protective covering and refilling the trench etc as reqd.Trench size:Width:350mm, Height:1200mm/sand cushioning: Height :250mm,Width:350mm/ Protection:Double layer brick

Laying of 75 mm dia P80,PN6,HDPE Pipe, Wall thikness : minimum 3.7 maximum 7.2 mm of different length as per engineering requirement including laying of XLPE cable through HDPE pipe above ground level for riser/road crossing to Pole and other places where required etc as required and fitting fixing of pipe to pole with the help of Crossarm, Clamp, Nuts & Bolts. (a) Laying of HDPE pipe along with all accessories like socket ,bend,couplers etc

Erection of Stay set complete direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm thimble turn buckle, 7/3.15 mm dia G.I. stranded stay wire and train insulator etc. with supply of (TSECL Supply)

Erection of 2.8 mtr long 100X50X50X6mm MS Channel Bracket(ODC115)

Erection of 0.8 mtr long 100X50X50X6mm MS Channel Bracket(ODC115)

Erection of 2.8 mtr long 75X40X40X6mm MS Channel Bracket(ODC114)

Erection of 2.8 mtr long 65X65X6mm MS angle Bracket

Erection of 11 KV pin insulator with G.I. pin (TSECL Supply)

Erection &Commissioning of 11/0.430 KV, 63 KVA Distribution Transformer on pole with necessary connection and fitting, fixing of all allied components s required for making complete in all respect for energising (TSECL Supply)

Drawing and commissioning of 3 core 95 sqmm HT XLPE armoured power cable through GI pipe above ground level for riser to HT over head line and HT pillar (KIOSK) etc.as required and as per direction of Engineer-in-charge.

(Civil Works)

Supply and erection of earthing set by 2.5 mtr long G.I pipe (ISI Marked)of 40 mm dia with holes I/c a pair of clamps of 50x6mm MS Flat & 12 mm dia galvanized nuts & bolts along with alternate layer of salt and charcoal with supply of GI pipe as per REC s

Erection of T-shaped Pillar for cable ID Marking engraved with caption "POWER CABLE LINE" MADE OF Pre-cast RCC of size(pillar 3 ftx0.33 ftx0.33 ft) and T section 3 ftx0.33 ft by excavating earth I/c required paintaing of the engraved caption in black over yellow background as per technical reqirements.The pillar shall be embeded in earth by 1.5 ft.

Curiosity Constructions Pvt Ltd

KAJAL DAS