Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC VIKRAM COACHING GALI SUDAMA NAGARI MADI NATH BAREILLY 243001 | BAREILLY | UTTAR PRADESH | 243001 | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹40.5 L+₹8.3 L (25.8%)Rejected-Finance WARD NO 11 THIRIYA NIZAWAT KHAN BAREILLY | BAREILLY | BAREILLY | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹40.7 L+₹8.5 L (26.5%)Rejected-Finance | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹40.8 L+₹8.6 L (26.7%)Rejected-Finance | L4 | Rejected-Finance Over all rates are higher than L-1. | |
| 5 | L5₹42.6 L+₹10.4 L (32.4%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L5 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
31 Aug 2023, 6:00 pmClosed
GE (West) Bareilly
GE (West) Bareilly
SPECIAL REPAIRS AGAINST BER ITEMS AND ALLIED WORKS, PROVISION OF UPS BACK UP FOR LABOUR ROOM OF MH AND PROVISION OF CERTAIN E/M MINOR WORKS UNDER AGE E/M OF GE (WEST) BAREILLY.
2023_MES_604833_2
8133/C/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (West) Bareilly
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Bareilly
₹98,000
Yes
8 Sept 2023
12 Aug 2023
2 Sept 2023
12 Aug 2023
31 Aug 2023
19 Aug 2023
Amount
Taking down old ceiling fan of 1200 / 1400 mm sweep from Md Accn, OTM, banglow at any hight including tie rod, regulator etc. by opening of exsting electric connections complete all as specified and directed.
Supply and fixing of 1200 mm sweep ceiling fan of ivory colour complete with blades, down rod, 230 volts, minimum air delivery 210 CFM with service value 8.03/8.4 (Better energy efficient and air dilivery), BEE 5 Star Rated with brushless direct current motor (BLDC), total harmonic distorsion (TDH)<= 10% complete all as specified and directed. MAKE- Atomberg, Havells, Orient, Crompton.
Supply and fixing of 1400 mm sweep ceiling fan of ivory colour complete with blades, down rod, 230 volts, minimum air delivery 270 CFM with service value 8.03/8.4 (Better energy efficient and air dilivery), BEE 5 Star Rated with brushless direct current motor (BLDC), total harmonic distorsion (TDH)<= 10% complete all as specified and directed. MAKE- Atomberg, Havells, Orient, Crompton.
S & F in repairs ceiling rose PVC / polycarbonate isolated body 3 terminal, 230 volts AC ISI marked, complete all as specified and directed.
S & F in repairs electronic fan regulator suitable for BLDC fans 150 watt, flush socket type with five stepped range complete all as specified and directed. MAKE- Havells, SSK, Anchor.
S & F of 15 mm dia PVC flexible conduit pipe ISI marked complete all as specified and directed.
Taking down, dismaintling, disconnecting of Split type or Window type air conditioner any capacity alongwith its stabilizer from wall, window etc. from its original position and depositing the same into E&M storeyard complete all as specified and directed.
Taking down, dismaintling, disconnecting of water cooler, refrigerator or deep freezer any type and capacity from its original position and depositing the same into E&M storeyard complete all as specified and directed.
Taking down, dismaintling, disconnecting of desert cooler any type and capacity from its original position and depositing the same into E&M storeyard complete all as specified and directed.
Supply, installation,commissioning hi wall split units indoor and outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity 2.00 TR, BEE 5 star rating, single phase, 240 volts, 50 Hz complete all as specified and directed. MAKE- Hitachi, Carrier, Daikin, Voltas.
Supply, installation, commissioning of 500 Litres capacity deep freezer having hard top, double door, single phase, 240 volts, 50 Hz complete all as specified and directed. MAKE- Blue Star, Godrej, LG, Kelvinator.
Supply, installation, commissioning and testing of water cooler fully stainless steel body, having 80 Litres storage capacity and 80 Litres per hour nominal cooling capacity, electric driven, single phase including making water connections complete all as specified and directed. MAKE- Blue Star,LG, Samsung.
Supply and installation of PVC body desert cooler electric driven, single phase, 240 Volts, 50 Hz, engineering plastic white colour body, heavy duty fan motor, High efficiency honeycomb pads, 4 way air deflaction and water tank of capacity minimum 35 Litres complete with all internal PVC water pipe connections and all electrical wiring and connection lead having plug top, nominal air flow not less than 2500 Cum per hour complete all as specified and directed. MAKE- Symphony, Bajaj, Havells, Crompton.
Supply and installation of minimum 240 Litres capacity double door refrigerator, electric driven (single phase), BEE 5 star rated complete all as specified and directed. MAKE- LG, Kelvinator, Samsung.
Supply and fixing of 5 KVA capacity copper wounded floor mounted type voltage stabilizer for automatic operation, single phase naturally air cooled, indoor type designed for input voltage of 170 to 250 Volt with stabilized output voltage at 230 Volts with accuracy of + 2.5% complete all as specified and directed. MAKE- Sinetrac, Volina, V-Guard, Vinitec.
Supply and fixing of desert cooler mild steel sheet construction, made of 22 gauge thick GI sheet, electric driven (single phase), having nominal air flow capacity of 6000 Cum per hour with copper wounded blower motor, submersible type water pump of suitable capacity alongwith all fittings and fixtures as per standard practice / sample kept with Engineer-in-Charge complete all as specified and directed. MAKE OF MOTOR, PUMP, COOLER- Summer Cool, Summer King, Crompton.
M & L for point wiring for one socket outlet point 15 / 16 Ampere (Independent point), controlled by one, one way switch with 2.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including non-metallic PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or 1.2 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets etc. and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed.
S & F of switch piano flush button single pole 230 volts, one-way 16 Ampere complete all as specified and directed.
S & F of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Amperes flush type, 250 volts AC complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F of 15 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed.
S & F of 900 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe-410-S including cutting, welding etc. complete all as specified and directed.
S & F of 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
Supply, installation,commissioning hi wall split units indoor and outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity 1.50 TR, BEE 5 star rating, single phase, 240 volts, 50 Hz complete all as specified and directed. MAKE- Hitachi, Carrier, Daikin, Voltas.
S & F of 1100 volts grade heavy duty 4.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 20 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4.00 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.
S & F of single pole AC modular box with a top and earth plug and socket including one single pole MCB of 20 Ampre capacity suitable for connection of AC complete all as specified and directed.
S & F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP-43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S & F of MCB triple pole and neutral, 415 volts, 40 to 100 Ampere breaking capacity 10 KA, ‘C’ curve complete all as specified and directed.
S & F of MCB single pole, 240 volts, 5 to 32 Ampere breaking capacity 10 KA, ‘B’ curve complete all as specified and directed.
Supply and laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor 1100 volt grade, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe of cross sectional area 25 Sqmm 4 core complete all as specified and directed.
S & F of 1100 volts grade heavy duty 16.00 Sqmm size four single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 40 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 16.00 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - FOUR SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.
Supply, installation, commissioning and testing of three phase input and three phase out put PWM technology online UPS of 10 KVA capacity having LCD display to show load, battery bar graph and built in by-pass arrangement with auto change over protection in case of high and low voltage, single phasing and phase reversal protection etc. including appropriate size and Nos. of Batteries (Suitable for minimum backup of 60 minutes on full load) with battery rack and copper connecting cable complete all as specified and as directed. NOTE- The power factor of UPS shall be minimum 0.8 L. MAKE (UPS)- Sinetrac, Microtech, Luminous. MAKE (Battery)- Exide, OKAYA, Amron.
S & F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP-43 protection and double door, IK-09 with metal door suitable for mounting MCBs complete all as specified and as directed.
S & F of MCB single pole and neutral 240 volts, 40 to 63 Ampere breaking capacity 10 KA, ‘C’ curve complete all as specified and directed.
S & F of triple pole and earth enclosure with three pin and earth plug and socket including one triple pole and neutral MCB of 63 Ampere capacity, 415 volts, 50 Hz, 'C' curve complete all as specified and directed.
S & F of MCCB 3 Pole, 415 volts, Adjustable type, 160 Amperes with breaking capacity of 36 KA complete all as specified and directed. MAKE- Legrand, Siemens, Havells.
S & F of sheet steel powder coated distribution board vertical type, TPN 4 ways, 415 volts, with 250 Ampere rated copper bus bar, neutral link, earth bar, IP-43 protection and double door, suitable for mounting MCCB up to 160 Amperes as incomer and MCBs as out going complete including embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and directed. MAKE- Legrand, Siemens, Havells.
Supply, installation, commissioning and testing of electrically operated semi automatic straight type boom barrier, 240 volts, single phase, 50 Hz having lane width of 6.00 metres with opening / closing time more than 6 Seconds alongwith high performance motor, modular design, high level water proof cast iron base frame including flashing light and alarm system to indicate movement of barrier, necessary internal wiring, safety sensor, necessary grouting and PCC work as required at site complete all as specified and directed. MAKE- ASN, Psafe.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for laying cables and getting out in soft / loose soil including trimming sides and forming bottom surface to the required level / slope etc complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in each layer as in soil complete all as specified and directed.
Removing excavated material (soil) to a distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after laying of cable in trenches, punning complete all as specified and directed. Note:- Punning thickness of 18 cm will be considered for payment.
M & L for laying brick as in protection covers over cables using sub class 'B' old size bricks laid flat, length wise perpendicular to the axis of cable complete all as specified and directed.
S & F of 50 mm bore GI pipe light grade for cable protection, fixed to pole, along wall, floor, under road, across the drain or nallaha etc. complete all as specified and directed.
Supply, installing, commissioning and testing of new factory (CPRI approved) made cubical type weather and vermin proof LT feeder pillar box outdoor type of suitable size to accomodate all fixtures as detailed below including ventilation and louvers arrangement of perforated sheet, PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation of required / suitable size and as directed at site with angle iron frame of size 50 X 50 X 6 mm, 3 phase 4 wire 415 volts 50 Hz, fabricated out of 3.15 mm thick CRCA steel sheet duly powder coated having seven tank treatment process and keeping adequate working space inside of the box (outer width of the box not less than 45 cm and gap between bus bar not less than one inch) and double door handle including locking arrangement wih 1 No pad lock of 65 mm complete all as specified and directed with and including following electric control accessories:- NOTE:-Before manufacturing the panel, the drawing of the feeder pillar box will be approved by Engineer-in-Charge.
M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth lead 4 mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed.
Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed.
Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.
M & L for 18-20 mm thick machine cut black granite stone slab as in floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M & L for glazed ceramic coloured tiles 350 mm X 250 mm X 7 mm thick or 450 mm X 350 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls including applying 2 mm thick wall care putty and applying two coats of distemper oil emulsion complete all as specified and directed.
M & L for 15 to 18 mm thick Z-Black granite stone slab as in floor, skirting, dado and the like laid over and including 15 mm thick cement screed in cement mortar 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of slab including grinding / moulding and polishing complete all as specified and directed.
S & F in repairs 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F of vitreous china wash basin white oval shaped suitable for hospital purpose of size nearest size 550 X 400 mm including cutting for and pinning in ends of brackets and 32 mm dia chromium plated waste coupling complete all as specified and directed.
S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F of 32 mm dia PVC waste pipe 1.00 m long suitable for wash hand basin complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including dismantling of old existing one complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F in repairs 15 mm bore fancy type, chromium plated stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.
S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.
S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 Kg per running metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading, screws etc. complete all as specified and directed.
S & F of double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel complete all as specified and directed.
S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square exc. 0.5 sqm in each pane complete all as specified and directed.
NOTE- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
N S ELECTRICALS
SATISH KUMAR JAIN
LEEJA ENTERPRISES
SANJEEV ENTERPRISES
VINYAK TRADERS
M/S SARTHAK INFRASTRUCTURE AND ENGINEERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .